MR-2300-LCD Remote Annunciator - Secutron
MR-2300-LCD Remote Annunciator - Secutron MR-2300-LCD Remote Annunciator - Secutron
List of Figures and Tables 6
Introduction 1.0 Introduction The MR-2300-LCD is a remote annunciator used for the MR-2300 Series Fire Alarm Panels. It provides remote access to the fire alarm panel. i Note: Configuration of the MR-2300 series fire alarm panel from this remote annunciator is not allowed. The MR-2300-LCD has an LCD display, common feature LEDs and pushbuttons, as well as an alpha numeric keypad for the LCD. The MR-2300-LCD comes complete with an enclosure and can be surface mounted. 7.7" SYSTEM NORMAL 18:01 MON 2011-02-07 SYSTEM RESET A.C. ON ALARM SUPV TRBL CPU FAIL SIGNAL SILENCE 1 2 ABC 3 DEF ENTER 7.2" FIRE DRILL 4 5 6 GHI JKL MNO MENU BUZZER SILENCE 7 8 9 PRS TUV WXY CANCEL LAMP TEST * 0 QZ # INFO MR-2300 SERIES Remote Annunciator 1.25" Figure 1 Remote Annunciator Dimensions Each MR-2300-LCD has its own address. Addresses available are 1 to and including 6. The buttons on the left side may be individually disabled if required, by setting DIP Switch SW31, see Functional Setup section following. This annunciator may be selected to operate as an ancillary device using DIP Switch SW31-6 to disable all buttons except, Lamp Test, Buzzer Silence, Info and Arrow Buttons. i Note: This option, if selected takes priority over any other selections made on DIP Switch SW31. 7
- Page 1: MR-2300-LCD Remote Annunciator Syst
- Page 4 and 5: Table of Contents 7.3.11 Component
- Page 8 and 9: Introduction 1.1 Contact Us For Gen
- Page 10 and 11: Functional Setup 3.0 Functional Set
- Page 12 and 13: Wiring 4.0 Wiring To wire the MR-23
- Page 14 and 15: Specifications & Features 5.0 Speci
- Page 16 and 17: Warranty and Warning Information 7.
- Page 18 and 19: Warranty and Warning Information 7.
- Page 20: Warranty and Warning Information ob
List of Figures and Tables<br />
6