Download complete user manual (PDF). - Brocade

3
PIM Dense
Displaying all multicast cache entries in a pruned state
Use the following command to display all multicast cache entries that are currently in a pruned
state and have not yet aged out.
Brocade(config)# show ip pim prune
1 (104.1.1.2 231.0.1.1):
e2/2,2/2(150)
2 (108.1.1.100 231.0.1.1):
e2/2,2/2(150)
3 (104.1.1.2 231.0.1.2):
e2/2,2/2(150)
4 (108.1.1.100 231.0.1.2):
e2/2,2/2(150)
5 (108.1.1.100 231.0.1.3):
e2/2,2/2(150)
6 (104.1.1.2 231.0.1.4):
e2/2,2/2(150)
7 (108.1.1.100 231.0.1.4):
e2/2,2/2(150)
8 (104.1.1.2 231.0.1.5):
e2/2,2/2(150)
9 (108.1.1.100 231.0.1.5):
e2/2,2/2(150)
Total Prune entries: 9
Syntax: show ip pim [ vrf vrf-name ] prune
Displaying all multicast cache entries
You can use the following command to display all multicast cache entries.
Brocade(config)# show ip pim mcache
IP Multicast Mcache Table
Entry Flags : SM - Sparse Mode, SSM - Source Specific Multicast, DM - Dense Mode
RPT - RPT Bit, SPT - SPT Bit, LSRC - Local Source, LRCV - Local Receiver
HW - HW Forwarding Enabled, FAST - Resource Allocated, TAG - Need For
Replication Entry
REGPROB - Register In Progress, REGSUPP - Register Suppression Timer
MSDPADV - Advertise MSDP, NEEDRTE - Route Required for Src/RP, PRUN - DM
Prune Upstream
Interface Flags: IM - Immediate, IH - Inherited, WA - Won Assert
MJ - Membership Join, MI - Membership Include, ME - Membership Exclude
BR - Blocked RPT, BA - Blocked Assert, BF - Blocked Filter, BI - Blocked IIF
Total entries in mcache: 20
1 (140.140.140.3, 225.0.0.1) in v340 (tag e8/1), Uptime 00:00:02 Rate 0 (DM)
Source is directly connected
Flags (0x200004e1) DM HW FAST TAG
fast ports: ethe 4/6 ethe 8/26
AgeSltMsk: 1, L2 FID: 8188, DIT: 3 , AvgRate: 0, profile: none
Forwarding_oif: 2
L3 (HW) 2:
TR(e4/6,e4/6)(VL330), 00:00:02/0, Flags: IM
e8/26(VL310), 00:00:02/0, Flags: IM
Src-Vlan: 340
80 FastIron Ethernet Switch IP Multicast Configuration Guide
53-1002638-02