Download complete user manual (PDF). - Brocade

PIM SM snooping show commands 2
Displaying PIM SM snooping information
To display PIM SM snooping information, enter the show ip multicast pimsm-snooping command.
Brocade#show ip multicast pimsm-snooping
vlan 1, has 2 caches.
1 (* 230.1.1.1) has 1 pim join ports out of 1 OIF
1 (age=60)
1 has 1 src: 10.20.20.66(60)
2 (* 230.2.2.2) has 1 pim join ports out of 1 OIF
1 (age=60)
1 has 1 src: 10.20.20.66(60)
This output shows the number of PIM join OIF out of the total OIF. The join or prune messages are
source-specific. In this case, If the mcache is in (* G), the display function will also print the traffic
source information.
Syntax: show ip multicast pimsm-snooping [vlan-id]
Use the vlan-id parameter to display PIM SM snooping information for a specific VLAN.
Displaying PIM SM snooping information on a
Layer 2 switch
You can display PIM SM snooping information for all groups by entering the following command at
any level of the CLI on a Layer 2 Switch.
Brocade#show ip multicast pimsm-snooping vlan 100
VLAN 100, has 2 caches
1(*230.1.1.1) has 1 pim join ports out of 1OIF
1(age=60)
1 has 1 src: 10.20.20.66(60)
2(* 230.2.2.2) has 1 pim join ports out of 1 OIF
1(age=60)
1 has 1 src: 10.20.20.66(60)
Syntax: show ip mulitcast pimsm-snooping vlan vlan-id
Enter the ID of the VLAN for the vlan vlan-id parameter.
If you want to display PIM SM snooping information for one source or one group, enter a command
as in the following example. The command also displays the (source, port) list of the group.
Brocade#show ip multicst pimsm-snooping 230.1.1.1
Show pimsm snooping group 230.1.1.1 in all vlans
VLAN 10, has 2 caches
1(*230.1.1.1) has 1 pim join ports out of 1 OIF
1(age=120)
1 has 1 src:10.20.20.66(120)
FastIron Ethernet Switch IP Multicast Configuration Guide 55
53-1002638-02