Download complete user manual (PDF). - Brocade

Multicast Listener Discovery and source-specific multicast protocols 4
TABLE 52
Field
Output from the show ipv6 mld vrf eng settings command (Continued)
Description
Last Member Query Interval
Last Member Query Count
Indicates when a leave is received; a group-specific query is sent. The last
member query count is the number of queries with a time interval of (LMQT)
is sent.
Specifies the number of group-specific queries when a leave is received.
Displaying static MLD groups
The following command displays static MLD groups for the “cs” VRF.
Brocade# show ipv6 mld vrf cs static
Group Address
Interface Port List
----------------------------------------+---------+---------
ff1e:1::1 v3 ethe 2/10
ff1e:a::7f v3 ethe 2/10
Syntax: show ipv6 mld [vrf vrf-name] static
The vrf parameter specifies that you want to display static MLD group information for the VRF
specified by the vrf-name variable.
Table 53 displays the output from the show ipv6 mld vrf cs static command.
TABLE 53
Field
Output from the show ipv6 mld vrf cs static command
Description
Group Address
Interface Port List
The address of the multicast group.
The physical ports on which the multicast groups are received.
Displaying MLD traffic
To display information on MLD traffic, enter a command such as the following.
Brocade# show ipv6 mld traffic
Recv QryV1 QryV2 G-Qry GSQry MbrV1 MbrV2 Leave IS_IN IS_EX ToIN ToEX ALLO BLK
e3/1 0 0 0 0 0 0 0 0 0 0 0 0 0
e3/2 0 0 0 0 0 0 0 0 0 0 0 0 0
e6/18 0 0 0 0 0 176 0 110 0 0 0 66 0
e6/19 0 0 0 0 0 176 0 110 0 0 0 66 0
e6/20 0 0 0 0 0 176 0 110 0 0 0 66 0
e6/25 0 0 0 0 0 176 0 110 0 0 0 66 0
l1 0 0 0 0 0 0 0 0 0 0 0 0 0
Send QryV1 QryV2 G-Qry GSQry
e3/1 0 0 0 0
e3/2 0 0 0 0
e6/18 0 10 10 0
e6/19 0 10 10 0
e6/20 0 10 10 0
e6/25 0 10 10 0
l1 0 0 0 0
R2#
The report has a Receive and a Send section.
FastIron Ethernet Switch IP Multicast Configuration Guide 193
53-1002638-02