Download complete user manual (PDF). - Brocade
Download complete user manual (PDF). - Brocade
Download complete user manual (PDF). - Brocade
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4<br />
IPv6 PIM Sparse<br />
<strong>Brocade</strong>#show ipv6 pim rp-map<br />
Number of group-to-RP mappings: 3<br />
-------------------------------------------------------------------------------<br />
S.No Group address RP address<br />
-------------------------------------------------------------------------------<br />
1 ff07::c:1 3200:12::32<br />
2 ff07::c:2 3200:12::32<br />
3 ff07::c:3 3200:12::32<br />
Number of group-to-RP mappings: 3<br />
Syntax: show ipv6 pim [vrf vrf-name] rp-map<br />
The vrf parameter allows you to display IPv6 RP-to-group-mappings for the VRF instance identified<br />
by the vrf-name variable.<br />
Table 40 displays the output from the show ipv6 rp-map command.<br />
TABLE 40<br />
Field<br />
Output from the show ipv6 pim rp-map command<br />
Description<br />
Index<br />
Group address<br />
RP address<br />
The index number of the table entry in the display.<br />
Indicates the IPv6 PIM Sparse multicast group address using the listed RP.<br />
Indicates the Iv6 address of the Rendezvous Point (RP) for the listed PIM<br />
Sparse group.<br />
Displaying RP information for an IPv6 PIM Sparse group<br />
To display RP information for an IPv6 PIM Sparse group, enter the following command at any CLI<br />
level.<br />
<strong>Brocade</strong># show ipv6 pim rp-hash ff1e::1:2<br />
RP: 2001:3e8:255:255::17, v2<br />
Info source: 2001:3e8:255:255::17, via bootstrap<br />
Syntax: show ipv6 pim [vrf vrf-name] rp-hash group-addr<br />
The vrf parameter allows you to display RP information for a PIM Sparse group for the VRF instance<br />
identified by the vrf-name variable.<br />
The group-addr parameter is the address of an IPv6 PIM Sparse IP multicast group.<br />
Table 41 displays the output from the show ipv6 pim rp-hash group-addr command.<br />
TABLE 41<br />
Field<br />
Output from the show ipv6 pin rp-hash group-addr command<br />
Description<br />
RP<br />
Info source<br />
Indicates the IPv6 address of the Rendezvous Point (RP) for the specified IPv6 PIM Sparse group.<br />
Following the IPv6 address is the port or virtual interface through which this device learned the<br />
identity of the RP.<br />
Indicates the IPv6 address on which the RP information was received. Following the IPv6 address<br />
is the method through which this device learned the identity of the RP.<br />
Displaying the RP set list<br />
To display the RP set list, enter the show ipv6 pim rp-set command at any CLI level.<br />
172 FastIron Ethernet Switch IP Multicast Configuration Guide<br />
53-1002638-02