Download complete user manual (PDF). - Brocade
Download complete user manual (PDF). - Brocade
Download complete user manual (PDF). - Brocade
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Configuring Multicast Source Discovery Protocol (MSDP) 3<br />
TABLE 23<br />
This field...<br />
RcvNext<br />
RcvWnd<br />
TotalRcv<br />
RcvQue<br />
SendQue<br />
MSDP peer information (Continued)<br />
Displays...<br />
The next sequence number expected from the neighbor.<br />
The size of the receive window.<br />
The number of sequence numbers received from the neighbor.<br />
The number of sequence numbers in the receive queue.<br />
The number of sequence numbers in the send queue.<br />
Displaying Source Active cache information<br />
To display the Source Actives in the MSDP cache, use the following command.<br />
<strong>Brocade</strong># show ip msdp vrf blue sa-cache<br />
Total of 10 SA cache entries<br />
Index RP address (Source, Group) Orig Peer Age<br />
1 2.2.2.2 (192.6.1.10, 227.1.1.1) 192.1.1.2 0<br />
2 2.2.2.2 (192.6.1.10, 227.1.1.2) 192.1.1.2 0<br />
3 2.2.2.2 (192.6.1.10, 227.1.1.3) 192.1.1.2 0<br />
4 2.2.2.2 (192.6.1.10, 227.1.1.4) 192.1.1.2 0<br />
5 2.2.2.2 (192.6.1.10, 227.1.1.5) 192.1.1.2 0<br />
6 2.2.2.2 (192.6.1.10, 227.1.1.6) 192.1.1.2 0<br />
7 2.2.2.2 (192.6.1.10, 227.1.1.7) 192.1.1.2 0<br />
8 2.2.2.2 (192.6.1.10, 227.1.1.8) 192.1.1.2 0<br />
9 2.2.2.2 (192.6.1.10, 227.1.1.9) 192.1.1.2 0<br />
10 2.2.2.2 (192.6.1.10, 227.1.1.10) 192.1.1.2 0<br />
Syntax: show ip msdp [vrf vrf-name] sa-cache [ source-address | group-address | peer-as<br />
as-number | counts | orig-rp rp-address | peer peer-address ] [rejected | self-originated]]<br />
The source-address parameter selects the source address of the SA entry.<br />
The group-address parameter selects the group address of the SA entry.<br />
The peer-as keyword specifies the BGP AS Number of the forwarding peer.<br />
The counts keyword displays only the count of entries.<br />
The orig-rp keyword specifies the originating RP address.<br />
The peer keyword specifies the peer address.<br />
The rejected keyword displays the rejected SAs.<br />
The self-originated keyword displays the self-originated SAs.<br />
Table 24 describes the output from this command.<br />
TABLE 24<br />
This field...<br />
Total<br />
Index<br />
RP<br />
SourceAddr<br />
MSDP source active cache<br />
Displays...<br />
The number of entries the cache currently contains.<br />
The cache entry number.<br />
The RP through which receivers can access the group traffic from the source<br />
The IP address of the multicast source.<br />
FastIron Ethernet Switch IP Multicast Configuration Guide 121<br />
53-1002638-02
Change language