Download complete user manual (PDF). - Brocade
Download complete user manual (PDF). - Brocade
Download complete user manual (PDF). - Brocade
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
3<br />
Displaying PIM Sparse configuration information and statistics<br />
Field<br />
Profile<br />
Number of matching entries<br />
Outgoing interfaces Section<br />
L3<br />
L2<br />
HW<br />
SW<br />
Eth/Tr(VL1)<br />
Flags (explanation of flags in the<br />
OIF section)<br />
Src-Vlan<br />
Description<br />
Shows the Profile ID associated with the Stream.<br />
Shows the total number of mcache entries matching a particular multicast<br />
filter specified.<br />
This section consists of three parts. L3 OIFs, L2OIFs and Blocked OIFs. And<br />
each section has Format of L3/L2/Blocked followed by (HW/SW) followed by<br />
count of the number of OIF in each section.<br />
Additionally, each section displays the OIFs one per line. And shows the OIF in<br />
the format eth/Tr(Vlan) followed by uptime/expiry time, followed by the Flags<br />
associated with each OIF.<br />
Shows whether the traffic is routed out of the interface.<br />
Shows whether the traffic is switched out of the interface.<br />
Shows whether the entry is hardware forwarded.<br />
Shows whether the entry is software forwarded<br />
Shows the outgoing interface on the specified VLAN.<br />
Shows the flags set in each of the Outgoing interface in abbreviated string<br />
format whose explanations are as below. Legend of this shown at the top of<br />
each entry<br />
IM - Immediate<br />
IH - Inherited<br />
MJ - Membership Join<br />
MI - Membership Include<br />
ME - Membership Exclude<br />
BR - Blocked due to SG RPT<br />
BA - Blocked due to Assert<br />
BF - Blocked due to Filter<br />
BI - Blocked IIF (Incoming interface) matches OIF<br />
Shows the VLAN associated with the ingress interface.<br />
Displaying the PIM multicast cache for DIT<br />
To display the PIM multicast cache for a specified dit, enter the following command at any CLI level.<br />
<strong>Brocade</strong>#show ip pim mcache dit-idx 2<br />
IP Multicast Mcache Table<br />
Entry Flags : SM - Sparse Mode, SSM - Source Specific Multicast, DM - Dense Mode<br />
RPT - RPT Bit, SPT - SPT Bit, LSRC - Local Source, LRCV - Local Receiver<br />
HW - HW Forwarding Enabled, FAST - Resource Allocated, TAG - Need For Replication<br />
Entry<br />
REGPROB - Register In Progress, REGSUPP - Register Suppression Timer<br />
MSDPADV - Advertise MSDP, NEEDRTE - Route Required for Src/RP, PRUN - DM Prune<br />
Upstream<br />
Interface Flags: IM - Immediate, IH - Inherited, WA - Won Assert<br />
MJ - Membership Join, MI - Membership Include, ME - Membership Exclude<br />
BR - Blocked RPT, BA - Blocked Assert, BF - Blocked Filter, BI - Blocked IIF<br />
Total entries in mcache: 30<br />
1 (20.20.20.100, 225.1.1.1) in v220 (tag e1/1/13), Uptime 07:12:07, Rate 0 (SM)<br />
upstream neighbor 220.220.220.1<br />
Flags (0x200680e1) SM SPT LRCV HW FAST TAG<br />
106 FastIron Ethernet Switch IP Multicast Configuration Guide<br />
53-1002638-02
Change language