Download complete user manual (PDF). - Brocade
Download complete user manual (PDF). - Brocade
Download complete user manual (PDF). - Brocade
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Displaying PIM Sparse configuration information and statistics 3<br />
<strong>Brocade</strong># show ip pim rp-map<br />
Number of group-to-RP mappings: 6<br />
Group address RP address<br />
-------------------------------<br />
1 239.255.163.1 99.99.99.5<br />
2 239.255.163.2 99.99.99.5<br />
3 239.255.163.3 99.99.99.5<br />
4 239.255.162.1 99.99.99.5<br />
5 239.255.162.2 43.43.43.1<br />
6 239.255.162.3 99.99.99.5<br />
Syntax: show ip pim [vrf vrf-name] rp-map<br />
The vrf option allows you to display candidate RP-to-group mappings for the VRF instance identified<br />
by the vrf-name variable.<br />
This display shows the following information.<br />
TABLE 16<br />
This field...<br />
Output of the show ip pim rp-map command<br />
Displays...<br />
Group address<br />
RP address<br />
Indicates the PIM Sparse multicast group address using the listed RP.<br />
Indicates the IP address of the Rendezvous Point (RP) for the listed PIM Sparse group.<br />
Displaying RP Information for a PIM Sparse group<br />
To display RP information for a PIM Sparse group, enter the following command at any CLI level.<br />
<strong>Brocade</strong># show ip pim rp-hash 239.255.162.1<br />
RP: 207.95.7.1, v2<br />
Info source: 207.95.7.1, via bootstrap<br />
Syntax: show ip pim [vrf vrf-name] rp-hash group-addr<br />
The vrf option allows you to display RP information for the VRF instance identified by the vrf-name<br />
variable.<br />
The group-addr parameter is the address of a PIM Sparse IP multicast group.<br />
Table 17 describes the output from this command.<br />
TABLE 17<br />
This field...<br />
RP<br />
Info source<br />
Output from the show ip pim command<br />
Displays...<br />
Indicates the IP address of the Rendezvous Point (RP) for the specified PIM Sparse<br />
group.<br />
Indicates the source of the RP information. It can be a static-RP configuration or<br />
learned via the bootstrap router. If RP information is learned from the boot strap, the<br />
BSR IP address is also displayed.<br />
Displaying the RP set list<br />
To display the RP set list for the device elected as BSR, enter the following command at any CLI<br />
level.<br />
FastIron Ethernet Switch IP Multicast Configuration Guide 101<br />
53-1002638-02
Change language