Download complete user manual (PDF). - Brocade
Download complete user manual (PDF). - Brocade
Download complete user manual (PDF). - Brocade
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
3<br />
Displaying PIM Sparse configuration information and statistics<br />
TABLE 14<br />
This field...<br />
Output from the show ip pim bsr command (Continued)<br />
Displays...<br />
group prefixes<br />
Candidate-RP-advert<br />
isement period<br />
Indicates the multicast groups for which the RP listed by the previous field is a candidate<br />
RP.<br />
NOTE: This field appears only if this device is a candidate BSR.<br />
Indicates how frequently the BSR sends candidate RP advertisement messages.<br />
NOTE: This field appears only if this device is a candidate BSR.<br />
Displaying candidate RP information<br />
To display candidate RP information, enter the following command at any CLI level.<br />
<strong>Brocade</strong># show ip pim rp-candidate<br />
Next Candidate-RP-advertisement in 00:00:10<br />
RP: 207.95.7.1<br />
group prefixes:<br />
224.0.0.0 / 4<br />
Candidate-RP-advertisement period: 60<br />
This example show information displayed on a device that is a candidate RP. The next example<br />
shows the message displayed on a device that is not a candidate RP.<br />
<strong>Brocade</strong># show ip pim rp-candidate<br />
This system is not a Candidate-RP.<br />
Syntax: show ip pim [vrf vrf-name] rp-candidate<br />
This command displays candidate RP information for the VRF instance identified by the vrf-name<br />
variable.<br />
Table 15 describes the output from this command.<br />
TABLE 15<br />
This field...<br />
Output from the show ip pim rp-candidate command<br />
Displays...<br />
Candidate-RP-advertisement in<br />
RP<br />
group prefixes<br />
Candidate-RP-advertisement<br />
period<br />
Indicates how time will pass before the BSR sends the next RP message. The<br />
time is displayed in "hh:mm:ss" format.<br />
NOTE: This field appears only if this device is a candidate RP.<br />
Indicates the IP address of the Rendezvous Point (RP).<br />
NOTE: This field appears only if this device is a candidate RP.<br />
Indicates the multicast groups for which the RP listed by the previous field is a<br />
candidate RP.<br />
NOTE: This field appears only if this device is a candidate RP.<br />
Indicates how frequently the BSR sends candidate RP advertisement<br />
messages.<br />
NOTE: This field appears only if this device is a candidate RP.<br />
Displaying RP-to-group mappings<br />
To display RP-to-group-mappings, enter the following command at any CLI level.<br />
100 FastIron Ethernet Switch IP Multicast Configuration Guide<br />
53-1002638-02
Change language