Download complete user manual (PDF). - Brocade
Download complete user manual (PDF). - Brocade
Download complete user manual (PDF). - Brocade
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
3<br />
Displaying PIM Sparse configuration information and statistics<br />
<strong>Brocade</strong>(config)# show ip pim group<br />
Total number of groups for VRF default-vrf: 7<br />
1 Group 226.0.34.0<br />
Group member at e2/9: v59<br />
Group member at e1/16: v57<br />
2 Group 226.0.77.0<br />
Group member at e2/9: v59<br />
Group member at e1/16: v57<br />
3 Group 226.0.120.0<br />
Group member at e2/9: v59<br />
Group member at e1/16: v57<br />
4 Group 226.0.163.0<br />
Group member at e2/9: v59<br />
Group member at e1/16: v57<br />
5 Group 226.0.206.0<br />
Group member at e2/9: v59<br />
Group member at e1/16: v57<br />
6 Group 226.0.249.0<br />
Group member at e2/9: v59<br />
Group member at e1/16: v57<br />
7 Group 226.0.30.0<br />
Group member at e2/9: v59<br />
Group member at e1/16: v57<br />
<strong>Brocade</strong>(config)#<br />
Syntax: show ip pim [vrf vrf-name] group<br />
The vrf option allows you to display PIM group information for the VRF instance identified by the<br />
vrf-name variable.<br />
Table 13 describes the output from this command.<br />
TABLE 13<br />
This field...<br />
Output from the show ip pim vrf group command<br />
Displays...<br />
Total number of Groups<br />
Index<br />
Group<br />
Ports<br />
Lists the total number of IP multicast groups the device is forwarding.<br />
NOTE: This list can include groups that are not PIM Sparse groups. If interfaces on<br />
the device are configured for regular PIM (dense mode), these groups are<br />
listed too.<br />
The index number of the table entry in the display.<br />
The multicast group address<br />
The device ports connected to the receivers of the groups.<br />
Displaying BSR information<br />
To display BSR information, enter the following command at any CLI level.<br />
<strong>Brocade</strong>(config)# show ip pim bsr<br />
PIMv2 Bootstrap information for Vrf Instance : default-vrf<br />
------------------------------------------------------------------------------<br />
This system is the Elected BSR<br />
BSR address: 1.51.51.1. Hash Mask Length 32. Priority 255.<br />
Next bootstrap message in 00:01:00<br />
Configuration:<br />
Candidate loopback 2 (Address 1.51.51.1). Hash Mask Length 32. Priority 255.<br />
98 FastIron Ethernet Switch IP Multicast Configuration Guide<br />
53-1002638-02