FutureComTM S/FTP 550/23s LS0H-1 Cat. 6A Cable Application ...

Technical Product Datasheet
CCXEDR-D00xx-C003-xx / February 2009
Type designation
Category
Copper
conductor
Number
of pairs
Fire rating
(MJ/m)
Halogenfree
Tensile
strength for
installation [N]
Outside-ø
[mm]
S/FTP 550/23s 4P LSZH-1 6A AWG 23 4 0.50 yes 145 7.0 48
S/FTP 550/23s 8P LSZH-1 6A AWG 23 8 1.03 yes 290 7.0 x 15.5 96
Crush resistance according to EN 50289-3-5: 1000 N/100mm/1 min (electrical characteristics according to EN 50288-5-1 are kept).
Electrical Characteristics @ 20°C
Weight
[kg/km]
Frequency in MHz 1 10 16 20 31.25 62.5 100 250 500 550
Attenuation in dB/100 m per standard* 2.1 5.9 7.5 8.4 10.5 15.0 19.1 31.1 45.3 -
Typical values dB/100 m 1.8 5.3 6.8 7.6 9.6 13.6 17.3 27.7 41.9 42.6
Near-end crosstalk loss in dB per standard* 75.3 60.3 57.2 55.8 52.9 48.4 45.3 39.3 34.8
Typical values dB/100 m >100 >100 >100 >100 >100 97 95 90 83 77
PSNEXT in dB/100 m per standard* 72.3 57.3 54.2 52.8 49.9 45.4 42.3 36.3 31.8 -
Typical values dB/100 m 98 98 98 98 98 95 93 88 81 75
ACR-F in dB/100 m per standard*
(old: ELFEXT)
68.0 48.0 43.9 42.0 38.1 32.1 28.0 20.0 14.0 -
Typical values dB/100 m 93 93 93 93 90 86 83 70 57 51
PS ACR-F in dB/100 m per standard*
(old: PSELFEXT)
65.0 45.0 40.9 39.0 35.1 29.1 25.0 17.0 11.0 -
Typical values dB/100 m 90 90 90 90 87 83 80 67 54 48
ACR-N in dB/100m per standard*
(old: ACR)
73.2 54.4 49.8 47.4 42.4 33.4 26.2 8.3 -10.4 -
Typical values (ACR-N) in dB/100m 98.2 94.7 93.2 92.4 90.4 83.4 77.7 62.3 41.1 34.4
*) Standard: Requirements on 100 m installed Category 6 A cable (corresponds to ISO/IEC 61156-5 (Draft 2006)
• Max. loop resistance: 165 /km
• Max. resistance difference: 1%
• Insulation resistance: > 5000 M x km
• Impedance Z 0 @ 0.064 MHz: 125 ± 20%
• Impedance Z 0 @ 1 up to 100 MHz: 100 ± 15%
• Impedance Z 0 @ 101 up to 250 MHz: 100 ± 18%
• Transfer impedance: < 100 m per meter at 10 MHz
• Longitudinal conversion loss dB/ref. Length = 1000 m: > 46 dB @ 64 kHz
• Longitudinal conversion loss dB/ref. Length = 100 m: > 40 dB @ 1 MHz
• Longitudinal conversion loss dB/ref. Length = 100 m: > 20 dB @ 100 MHz
• Mutual capacity: 43 pF/m
• Max. capacitance @ 0.001 MHz: 1000 pF/km
• Propagation velocity > 10 MHz ( NVP * c ): 0.79 c
• Propagation delay > 10 MHz: 4.2 ns/m; Skew: 4 ns/100m
Mechanical Characteristics
Wire insulation: Zero halogen foam/skin material
Sheath material: Zero halogen. flame-retardant
Deployment area: Dry and damp rooms
Max. temperature range during installation: 0°C up to +50 °C
Max. operating temperature: -20 up to +60°C
Min. bend radius in service: 21 mm (over flat side)
Min. bend radius during installation: 60 mm (over flat side)
Corning Cable Systems GmbH & Co. KG · Leipziger Strasse 121 · 10117 Berlin, Germany
TEL: 00800-2676-4641 (00800-CORNING1) · FAX: +49-30-5303-2335 · www.corningcablesystems.com
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems’ products without prior
notification. LANscape is a registered trademark of Corning Cable Systems Brands, Inc. All other trademarks are the properties of their respective owners.
Corning Cable Systems is ISO 9001 certified. © 2009 Corning Cable Systems. All rights reserved. Published in the EU.