Radiation Curing: Coatings and Composites
Radiation Curing: Coatings and Composites Radiation Curing: Coatings and Composites
EB Market Segments Require Different Energies Market Segment Surface Curing Shrink Film Wire & Cable Sterilization Composites Electron Energy 80 – 300 keV 300 – 800 keV 0.4 – 3 MeV 3 –10 MeV 10 MeV Typical Penetration 0.4 mm 2 mm 11 mm 38 mm 24 mm
80 - 120 keV Development Unit 1.5 m 0.9 m 1.5 m
- Page 1 and 2: Radiation Curing: Coatings and Comp
- Page 3: Electron Beam Parameters Voltage =
- Page 7 and 8: Low-voltage EB Equipment 300 keV se
- Page 9 and 10: X-ray Conversion
- Page 11 and 12: Unipolis 10 MeV EB/X-ray Facility
- Page 13 and 14: Brenner-Campbell Conclusions
- Page 15 and 16: Surface Tension Tests 55 Contact An
- Page 17 and 18: VARTM with PC/HDPE Platens Wetted c
- Page 19 and 20: Solubility EB/X-ray Cured Samples G
- Page 21 and 22: Toughness Testing 123 cm Falling tu
- Page 23 and 24: Properties Six Ply Carbon Fiber Rei
- Page 25 and 26: Developing Molecular Structures Con
- Page 27 and 28: Microphase Understanding Intra-mole
- Page 29 and 30: Thermal Analysis Resin Systems X-ra
- Page 31 and 32: Dynamic Mechanical Analysis Used by
- Page 33 and 34: Dynamic Mechanical Analysis tan δ
- Page 35 and 36: Pragmatic Tests: TMA TMA in compres
- Page 37 and 38: Heat Deflection Test 1.82 MPa 100 m
- Page 39 and 40: X-ray Curing Studies Initial X-ray
- Page 41 and 42: X-ray Curing Composites in the Mold
- Page 43 and 44: X-ray Cured Sports Car Fender
- Page 45: Conclusions + Some properties devel
EB Market Segments<br />
Require Different Energies<br />
Market<br />
Segment<br />
Surface <strong>Curing</strong><br />
Shrink Film<br />
Wire & Cable<br />
Sterilization<br />
<strong>Composites</strong><br />
Electron<br />
Energy<br />
80 – 300 keV<br />
300 – 800 keV<br />
0.4 – 3 MeV<br />
3 –10 MeV<br />
10 MeV<br />
Typical<br />
Penetration<br />
0.4 mm<br />
2 mm<br />
11 mm<br />
38 mm<br />
24 mm