TECHNICAL INFORMATION ORWO Surveillance Film P 100

TECHNICAL
INFORMATION
ORWO Surveillance Film P 100
Exposure index: ISO 100 / 21°
This speed value refers to a developed P 100 average gradient of 0,65. The exact exposure
index depends on the prevailing shooting and processing conditions.
Processing:
According to ORWO instruction 1102 (D76) to a recommended average gradient of 0,65.
Process as soon as possible.
RMS-Granularity: An average value of 12 ( read at a net visual diffuse density of 1,0 above
the minimum density using a 48 µm aperture)
Factor of modulation transfer function m 30 : > 0,80
Characteristic curve P 100: Processing ORWO instruction 1102
3,00
2,50
2,00
density
1,50
1,00
0,50
0,00
0,0 0,3 0,6 0,9 1,2 1,5 1,8 2,1 2,4 2,7 3,0 3,3 3,6 3,9 4,2
log H rel
Relative spectral sensitivity of P 100: Equal-energy spectrum
2,00
1,50
LOG (S rel )
1,00
0,50
FILMOTEC GmbH
0,00
400 450 500 550 600 650 700
wavelength [nm]
ChemiePark Bitterfeld Wolfen
Areal A, Röntgenstraße Geb. 415
06766 Wolfen
Tel.: +49 (0) - 3494 - 36 96 80
Fax: +49 (0) - 3494 - 36 96 82
filmotec@filmotec.de
www.filmotec.de
Darkroom lighting: Film should be processed in total darkness. If absolutely necessary,
processing can be done at the light of a 15 watt lamp (indirect) with ORWO safe light filter
no. 108 (dark green), Kodak no. 3 or Ilford no. 908, but a distance of at least 75 cm should be
kept.
____________________________________________________________________________________
page 2
TI-P100-X/2003