Water Handling Equipment Guide - National Wildfire Coordinating ...

WATER DELIVERY COMPONENTS AND ACCESSORIES
Hose Dispensers and Storage
6. Storage
Hard suction draft hose is normally used on
engines. The hard suction draft hose used is
usually in 8- or 10-foot lengths, and ranging in
diameter from 1 to 6 inches. Exceptions in
length and diameter can be found. Due to the
inflexibility of the draft hose sections, storage
methods vary. Draft hose normally is stored
within a side compartment, or placed within
external tubes or trays. A plastic or metal bin
may be attached to the forward end of slip-on
units for rolled suction hose storage.
Indoor hose storage—When fire hose
(particularly fabric type) is properly
maintained and stored, it will have an
extended life and provide dependable service
on the fireline. Storage racks can be
constructed to provide a neat, well-ventilated
hose storage area. There are other methods
that can be “homemade” and just as practical.
Written material: Fire equipment suppliers
(see appendix G).
140