310-1 Wildland Fire Qualification System Guide - National Wildfire ...
310-1 Wildland Fire Qualification System Guide - National Wildfire ...
310-1 Wildland Fire Qualification System Guide - National Wildfire ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
POSITION CATEGORIES<br />
Criteria for Position Consideration in the PMS <strong>310</strong>-1<br />
The following seven criteria must be met for a position to be considered for inclusion in the PMS<br />
<strong>310</strong>-1:<br />
1. The position is needed for national mobilization;<br />
2. The position is interagency in scope;<br />
3. The position has been reviewed and is supported by the interagency community;<br />
4. The position supports the NWCG mission;<br />
5. The position qualifications have been submitted by an NWCG member, agency,<br />
Geographic Area Coordinating Group, or NWCG working team;<br />
6. No other position exists that can accomplish these tasks;<br />
7. The primary position qualifications are not addressed or supported by industry<br />
standards/requirements and training.<br />
There are five position categories recognized by the <strong>National</strong> <strong>Wildfire</strong> Coordinating Group<br />
(NWCG):<br />
1. Incident Command <strong>System</strong> (ICS)<br />
2. <strong>Wildland</strong> <strong>Fire</strong><br />
3. Incident Support<br />
4. Associated Activities<br />
5. Technical Specialists<br />
The NWCG Operations and Workforce Development Committee (OWDC) has established and<br />
approved qualifications and position task books for the following four position categories:<br />
1. Incident Command <strong>System</strong> (ICS)<br />
2. <strong>Wildland</strong> <strong>Fire</strong><br />
3. Incident Support<br />
4. Associated Activities<br />
Technical Specialists<br />
Technical Specialists are personnel with specialized skills gained through educational degree<br />
programs or industry training of established standards. These personnel may perform the same<br />
duties during an incident that they perform in their regular job and may have supplemental<br />
training in the Incident Command <strong>System</strong> in order to utilize their specialized skills in the<br />
incident environment.<br />
Although position codes have been assigned to technical specialist positions that can be used<br />
within the Incident Command <strong>System</strong>, no minimum qualifications have been established by<br />
NWCG.<br />
For titles and position codes of identified technical specialists see the Incident <strong>Qualification</strong>s and<br />
Certification <strong>System</strong> (IQCS) website http://iqcs.nwcg.gov<br />
PMS <strong>310</strong>-1 22 June 2011