Polymer lapping - Ukintpress-conferences.com
Polymer lapping - Ukintpress-conferences.com Polymer lapping - Ukintpress-conferences.com
Surface Geometry and Surface Topographie Geometry BEFORE Polymer-Lapping Geometry AFTER Polymer-Lapping Topographie Regular Lapping Ra = 0.07µm/Rt = 0.25µm Topographie FriCSo Polymer Lapping Ra = 0.02µm/Rt= 0.13µm
Topography regular lapping vs polymer lapping– AFM (Atomic Force Microscope)
- Page 1 and 2: Surface treatment using Polymer Lap
- Page 3 and 4: Our Technologies Nanolayer based su
- Page 5 and 6: Our Products & Surface Engineering
- Page 7 and 8: Surface Engineering Treatment (SET)
- Page 9 and 10: SET2 - Grooving + Polymer lapping (
- Page 11: SET3 - Dimples + Polymer lapping (T
- Page 15 and 16: FriCSo “Finger-Print” (XPS) The
- Page 17 and 18: Polymer-Lapping devices for AD / ID
- Page 19 and 20: In house Tests Roller on Block 1 dr
- Page 21 and 22: Tribological Investigation: Pin on
- Page 23 and 24: Tribological Investigation: SOP (Sh
- Page 25 and 26: Measurement of contact angle Measur
- Page 27 and 28: Application: Liners Treatment of li
- Page 29 and 30: Application: Camshaft Significant r
- Page 31 and 32: Application: Engine Test (Technion)
- Page 33 and 34: Application: Engine Test (Technion)
- Page 35 and 36: Hydraulic Application - Eliminating
Topography regular <strong>lapping</strong> vs polymer <strong>lapping</strong>– AFM<br />
(Atomic Force Microscope)