Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
LCDM61NF21(MT02+DE200) Factory Alignment Specification<br />
list. Please check: components of the TS output from TDA10046 to CPU.<br />
5. Inset the CAM card( PCMCIA CARD) to CI connector, the integrated<br />
system will<br />
detect it. if system has not found it, please check:<br />
1) Input clock of Chip CIMAX SP2, The clock outputs from XD1<br />
(component<br />
XD1 of schematic) to chip CIMAX SP2.<br />
2) Components and schematic of CI section ,<br />
6. If not communication from ATV to digital module, Please check: I2C<br />
of<br />
the ATV( MT01 section) and digital module.<br />
7. Check the SPDIF output. Connect SPDIF to Digital Power Amplifier.<br />
Note: 4Mhz clock signal is sent out from tuner(TD1316A-MK3),<br />
then distributed the clock to tda10046aht and pnx8314.<br />
2�Final alignment<br />
Fix mainboard on the test tool�power on �check and make sure all the port are<br />
good<br />
Source Test signal Test pattern Conclusion<br />
Tuner Cable Full band Picture &<br />
sound is ok<br />
SCART1/2/SAV-C PM5418 PAL, half color & Picture &<br />
VBS<br />
Gray bar<br />
sound is ok<br />
SCART1/SAV-YC PM5418 PAL, half color & Picture &<br />
Gray bar<br />
sound is ok<br />
SCART1/-RGB PM5418 PAL, half color & Picture &<br />
Gray bar<br />
sound is ok<br />
SCART1 CVBS out cable First channel Picture &<br />
sound is ok<br />
HDMI DVD with HDMI Movie,720p Picture &<br />
certification @60Hz<br />
sound is ok<br />
VGA Chorma 2326 or 1024x768@60Hz Picture &<br />
2327<br />
haft color & Gray sound is ok<br />
headphone Cable First channel sound is ok<br />
Loud speaker Cable First channel Phase<br />
OK<br />
is<br />
YUV(YPbPr) chroma2327/BSG-3 1080i@60Hz Picture &<br />
60A/DVD<br />
haft color & Gray sound is ok<br />
3�The way to Factory menu
Change language