Citibank ® Custom Reporting System User Guide

Citibank Custom Reporting System User Guide | User Preferences — Drill Mode
User Preferences — Drill Mode
Overview
Use this procedure to set your drill mode preferences.
Key Concepts
The following user preferences can be set on the Drill mode screen:
Keep Parent While Drilling
Use the Keep parent while drilling drop-down list to keep the parent when drilling on a report, not
keep the parent, or use the settings stored in the report definition. By default, it uses the settings
stored in the report definition.
Keep Thresholds While Drilling
Use the Keep thresholds while drilling drop-down list to keep the thresholds for the reports when
drilling, not keep them, or use the settings stored in the report definition. By default, it uses the
settings stored in the report definition.
Open Drill Results in a New Window
This option allows you to determine if the drilled report results are displayed in a new window
when you drill on a report.
Applying Preference Changes
When you click the Apply button on any Preferences screen, the settings are applied to the
project differently, depending on which of the following selections you choose:
• Apply to all projects on the current server: The settings are applied to all projects, not just the
one you are currently configuring. This is the default option.
• Apply to current project: The settings are applied only to the current project.
Load Default Values
When you click the Load Default Values button, the administrator’s default values for this section
of preferences is loaded. These default values are not saved until you click the Apply button.
68