NZ4202 - Unitec

SNZ NZS*4202 95
85832b9 0042494 3Tî W
--`,,``,,,,,,``,``,`,,,`,,,`,-`-`,,`,,`,`,,`---
Issued June 1995 NZS 4202:1995
10.4.3
Splay cutting, notching and the like shall be enumerated.
10.4.4
Circular and profile cutting shall be measured in metres.
10.4.5
Welding shall be measured in metres. The type and size of weld, thickness of metal
and whether site or shop welded shall be stated.
10.4.6
All preparation of steelwork before welding shall be described. Spot welding and stud
welding shall be enumerated. Intermittent welding shall be measured overall stating
the spacings.
10.4.7
Brackets, cleats, gussets and the like shall be measured separately for each
sectional size or thickness of plate and the number of each type shall be stated. The
description shall include all cutting.
10.4.8
Plates shall have the mass calculated as the smallest size rectangles from which
they can be cut.
10.4.9
Rivets shall be enumerated and the grip length, diameter and pitch shall be stated.
10.4.10
Bolts and studs shall be enumerated, stating the length and diameter. The description
shall include washers, lock nuts and the like.
10.4.1 1
The area of steel to be treated or painted shall be measured in accordance with
section 35. Fire protection shall be measured separately for each fire rating and steel
section size.
10.4.12
Where shop drawings and the like are required, an appropriate item shall be
scheduled.
Copyright Standards New Zealand
Provided by IHS under license with SNZ
Document provided by IHS Licensee=Unitec Inst of Technology/5911177001,
03/02/2005 18:31:52 MST Questions or comments about this message: please call
the Document Policy Group at 303-397-2295.
10-2