TTC Skilled Trades Training - UAW-Chrysler.com
TTC Skilled Trades Training - UAW-Chrysler.com
TTC Skilled Trades Training - UAW-Chrysler.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Welding:<br />
STRUCTURAL STEEL WELDING (WTT 200)<br />
Course Description<br />
The participant should be able to prepare structural steel for welding; set up and adjust<br />
welding equipment; and weld structural steel in horizontal positions.<br />
Learning Out<strong>com</strong>e<br />
Upon <strong>com</strong>pletion of this course, participants should have a thorough understanding of:<br />
1. Shielded Metal Arc (GMAW) and Flux Cored Arc Welding (FCAW) fundamentals;<br />
2. welding safety;<br />
3. setup and adjustment of arc welding machines;<br />
4. electrode classifications and selection; and<br />
5. the hands-on skills needed to produce welds in horizontal positions.<br />
(Note: Vertical and overhead position welding are not offered in this course.)<br />
Course Objective<br />
To enable the participant to produce acceptable quality welds on structural steel using the<br />
shielded metal arc and flux cored welding processes.<br />
Major Topics Covered<br />
• Material specification<br />
• Weld joint design<br />
• Tacking and fit up<br />
• Filler metal selection<br />
• Welding techniques<br />
• Storage of low hydrogen electrode<br />
• Setup and adjustment of equipment<br />
Prerequisites<br />
Participants must meet ONE of the following: <strong>com</strong>pletion of Welding Safety & Overview of<br />
Processes (WPT 100), equivalent welding safety training at a <strong>com</strong>munity college, or certification<br />
from a welding safety course.<br />
Class Size<br />
6<br />
Course Duration<br />
40 hours<br />
2 hours<br />
75