TTC Skilled Trades Training - UAW-Chrysler.com
TTC Skilled Trades Training - UAW-Chrysler.com
TTC Skilled Trades Training - UAW-Chrysler.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Industrial Maintenance:<br />
THERMOGRAPHY (THT 200)<br />
Course Description<br />
The participant will learn how to use a Heat Imaging Camera to successfully locate and<br />
diagnose heat problems throughout the plant. The knowledge given is applicable to all trades<br />
because heat can be a problem in all types of industrial machinery and power supplies.<br />
Learning Out<strong>com</strong>e<br />
Upon <strong>com</strong>pletion of this course, participants should be able to:<br />
1. correctly operate an Infrared Heat Thermography Camera;<br />
2. identify hot spots in rotating equipment;<br />
3. determine if there are hot spots in hydraulic equipment;<br />
4. locate electrical problems that are causing excessive heat;<br />
5. perform a building scan to find areas of heat loss in roofs and walls;<br />
6. search out and find overloaded circuits that create a heat problem; and<br />
7. use the camera correctly to find sources of overload in power supplies.<br />
2 hours<br />
Course Objective<br />
To give participants the ability to correctly use an Infrared Camera in a variety of situations<br />
to identify, measure, and troubleshoot heat-related problems in equipment and facilities.<br />
Major Topics Covered<br />
• Safety<br />
• Buss scans<br />
• Gear boxes<br />
• Fluids<br />
• Pumps<br />
• Electrical scans<br />
• Circuit breakers<br />
• Mobile equipment<br />
• Molding equipment<br />
• Hydraulic scans<br />
• Steam valves<br />
• Wiring<br />
• Chemical<br />
• Emissivity<br />
• HVAC<br />
• Electric motors<br />
• Misalignment<br />
• Rotating equipment<br />
• Machining equipment<br />
• Building heat loss<br />
Prerequisites<br />
There are no prerequisites for this course, however, all participants from each trade must<br />
<strong>com</strong>e to class with a desire to participate and learn how Heat Thermography can help them<br />
with their specific trades.<br />
Class Size<br />
8<br />
Course Duration<br />
40 hours<br />
62