TTC Skilled Trades Training - UAW-Chrysler.com

Industrial Automation:
ADVANCED TELEMECANIQUE (TMT 200)
Course Description
The participant will gain hands-on experience in both troubleshooting and maintenance
techniques for rapid fault isolation and correction with a TSX-57 Premium Controller, Magelis
HMI, FIPWAY Communications, and the CAY-21 Linear Axis Control module.
Learning Outcome
Upon completion of this course, participants should be able to:
1. monitor a ladder logic program;
2. troubleshoot the Modicon Premium system;
3. replace Premium system hardware;
4. edit existing logic programs with the PL7 Pro software; and
5. identify the proper procedures for replacing Premium system components safely.
Course Objective
To provide the participant with the skills necessary to use the TSX Premium PLC PL7 Pro
programming software and the Magelis HMI programming software.
Major Topics Covered
• GRAFCET programming
• CAY Servo Module (Linear Axis Control)
• SMOVE Instructions for the CAY Module
• Troubleshooting and fault Isolation
• Safety techniques
• FIPWAY communications
• Tying all system components together
Prerequisite
All participants must have successfully completed Introduction to Telemechanique (TMT 100).
Class Size
8
Course Duration
40 hours
1 hour
37