Apollo 16 Hardware Manual.pdf - Universal Audio

ANALOG I/O
Analog Outputs 1 – 16
Dynamic Range
Signal-to-Noise Ratio
Total Harmonic Distortion + Noise
Connector Type
Monitor Outputs 1 – 2
Dynamic Range
Signal-to-Noise Ratio
Total Harmonic Distortion + Noise
Gain Range (Monitor Knob)
Connector Type
All Analog Outputs
Frequency Response
Channel Separation (Crosstalk)
Output Impedance
Stereo Level Balance
Gain Settings
Max Output Voltage (Reference Level @ +4 dBu, Balanced)
Max Output Voltage (Reference Level @ -10 dBV, Balanced)
Max Output Voltage (Reference Level @ -10 dBV, Single-Ended)
118.5 dB (A–weighting)
118.2 dB (A–weighting)
-107.5 dB @ -1 dBFS
Two Female DB25, Tascam wiring
115 dB (A–weighting)
115 dB (A–weighting)
-105.5 dB @ -1 dBFS
-INF to 0 dBFS
Two Male Balanced XLR (pin 2 hot)
20 Hz – 20 kHz, ±0.05 dB
-120 dB
600 Ohms
±0.01 dB
+4 dBu or -10 dBV (reference level is selectable in pairs)
20.22 dBu (18 dBV, 7.94 VRMS, 0 dBFS)
14.22 dBu (12 dBV, 3.98 VRMS, 0 dBFS)
8.22 dBu (6 dBV, 2 VRMS, 0 dBFS)
DIGITAL I/O
AES/EBU
Connector Type
XLR
Format
IEC 60958 Type I
MADI
Connector Type Dual Optical SC-Plug (ISO/IEC 9314-3)
Format
AES10
Supported Modes @ Sample Rates of 88.2 kHz and Higher Standard, Legacy
Word Clock
Connector Type
BNC
Lock Range
±0.5% of any supported sample rate
Word Clock Input Termination
75 Ohms, switchable
Syncronization Sources
Internal, Word Clock, AES/EBU
(continued)
Apollo 16 Hardware Manual
30
Specifications