12.10.2014 Views

BAG Wettable Powder COPPER SPRAY FUNGICIDE Fixed ... - UAP

BAG Wettable Powder COPPER SPRAY FUNGICIDE Fixed ... - UAP

BAG Wettable Powder COPPER SPRAY FUNGICIDE Fixed ... - UAP

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

• Where possible, rotate the use of <strong>COPPER</strong> <strong>SPRAY</strong> Fungicide or other<br />

Group M fungicides with different groups that control the same pathogens.<br />

• Use tank mixtures with fungicide from a different group when such use is<br />

permitted.<br />

• Fungicide use should be based on an IPM program that includes scouting,<br />

historical information related to pesticide use and crop rotation and<br />

considers cultural, biological and other chemical control practices.<br />

• Monitor treated fungal populations for resistance development.<br />

• If disease continues to progress after treatment with this product, do not<br />

increase the use rate. Discontinue use of this product and switch to<br />

another fungicide with a different target site of action, if available.<br />

Contact your local extension specialist or certified crop advisors for any<br />

additional pesticide resistance-management and/or IPM recommendations for<br />

specific crops and pathogens.<br />

For further information and to report suspected resistance, contact the Technical<br />

Service, Loveland Products Canada Inc., 1-800-328-4678 or at www.uap.ca.<br />

DIRECTIONS FOR USE: Apply in sufficient water for thorough coverage of all<br />

plant parts; this volume depends on spray equipment and size of plants. The<br />

spray tank should be partially filled with water and the required Copper Spray<br />

Fungicide added while stirring. Keep agitating during filling and spraying<br />

operations. May be used up to 1 day before harvest or as otherwise noted.<br />

DO NOT APPLY BY AIR.<br />

DO NOT apply this product in a way that will contact workers or bystanders,<br />

either directly or through drift. Only protected handlers may be in the area during<br />

application.<br />

DO NOT apply this product directly to freshwater habitats (such as lakes, rivers,<br />

sloughs, ponds, prairie potholes, creeks, marshes, streams, reservoirs and<br />

wetlands), estuarine/marine habitats.<br />

DO NOT contaminate irrigation or drinking water supplies or aquatic habitats by<br />

cleaning of equipment or disposal of wastes.<br />

Buffer zones<br />

Field sprayer application: DO NOT apply during periods of dead calm. Avoid<br />

application of this product when winds are gusty. DO NOT apply with spray<br />

droplets smaller than the American Society of Agricultural Engineers (ASAE)<br />

medium classification. Boom height must be 60 cm or less above the crop or<br />

ground.<br />

Airblast application: DO NOT apply during periods of dead calm. Avoid<br />

application of this product when winds are gusty. DO NOT direct spray above<br />

plants to be treated. Turn off outward pointing nozzles at row ends and outer

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!