10.10.2014 Views

technical manu al table of contents - Jamestown Distributors

technical manu al table of contents - Jamestown Distributors

technical manu al table of contents - Jamestown Distributors

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

EPIFANES YACHT ENAMEL<br />

Flexibility and durability!<br />

Type<br />

Color<br />

Gloss<br />

Recommended use<br />

Film characteristics<br />

Container Size<br />

Density<br />

Solids Content<br />

Recommended film<br />

thickness<br />

Application<br />

Drying times at<br />

65F / 65% RH<br />

Spray Application<br />

Additives<br />

Application<br />

conditions<br />

Tradition<strong>al</strong> One-component marine yacht varnish, coating based based on on tung oil oil, phenolic-modified <strong>al</strong>kyd resins. <strong>al</strong>kyd resins and<br />

maximum U.V. absorbers.<br />

42 Colors. See Epifanes Color chart.<br />

Interior and exterior wood above the waterline. Maintenance <strong>of</strong> existing, well<br />

Ultra adhering high one gloss. and two part varnish systems.<br />

Finishing Excellent coat durability for wood, and steel, U.V. <strong>al</strong>uminum protection and in <strong>al</strong>l fiberglass climatic in conditions. conjunction High with film the<br />

appropriate build capacity primers. and unique For interiors flow characteristics. and exteriors above the waterline. Absolutely<br />

the best for tradition<strong>al</strong> wood construction.<br />

Superior 250 ml., 500 flow, ml., gloss 1000 and ml., durability. 5000 ml., Excellent flexibility and water resistance in<br />

<strong>al</strong>l climatic conditions. Fresh and s<strong>al</strong>t water resistant. Vivid color brilliance.<br />

Outstanding Ultra high gloss wet edge and covering properties.<br />

All 0.92 colors 750 ml. White <strong>al</strong>so available in 2000 ml. and 4000 ml.<br />

0.95 55 +/- - 1.30 2 vol. kg./liter % (dependent on color)<br />

50 Per - coat 55 +/- wet 2 50 vol. micron % (dependent on color)<br />

Per coat dry 30 micron<br />

Per coat wet 60 - 70 micron<br />

Per Can coat <strong>al</strong>so dry be 30 applied - 35 micron by convention<strong>al</strong> air spray. Thin up to 20% with Epifanes<br />

Spray Thinner for Paint & Varnish.<br />

Brush, roller, convention<strong>al</strong> air spray, H.V.L.P., airless.<br />

Tack free 3 hours Tape free 24 hours<br />

Tack Hard free dry - 3 12 hours hours Tape Recoa<strong>table</strong> free - 24 24 hours hours<br />

Dry - 24 hours<br />

Recoa<strong>table</strong> - 24 hours<br />

Temperature between 10C and 30C during application and drying. Air humidity<br />

Convention<strong>al</strong> below 85%. Avoid air: Thin varnishing as needed in too up much to 20% wind with or sun. Epifanes A rapid Spray loss Thinner <strong>of</strong> solvents for<br />

Paint will occur & Varnish. under these Spray conditions viscosity 18 and - decrease 22 seconds the Din flowing Cup ability. 4, 14 - Add 18 seconds thinner<br />

Ford up to Cup the 4. specified 1.5 mm. percentage - 1.8 mm. Pressure to compensate 2 - 3 Bar. for the faster release <strong>of</strong> solvents.<br />

Epifanes Clear Gloss Varnish can be used over most types <strong>of</strong> other onecomponent<br />

Accelerator, <strong>al</strong>kyd Epifanes urethane Retarder based varnish and over properly sanded two-<br />

Epifanes<br />

component varnishes.<br />

Temperature should be between 50F. and 85F. during application. Air humidity<br />

below 85%. Avoid painting in too much wind or sun. A rapid loss <strong>of</strong> solvents will<br />

occur under these conditions and will decrease the flowing ability. Add thinner<br />

up to the specified percentage to compensate for the faster release <strong>of</strong> solvents.<br />

Epifanes Yacht Enamel is compatible with most other types <strong>of</strong> one-component<br />

<strong>al</strong>kyd or urethane based paints and over two-component paints. Any existing<br />

finish must be intact, degreased and sanded prior to recoating.<br />

DISCLAIMER OF WARRANTIES:<br />

Seller makes no express warranties. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND<br />

FITNESS FOR A PARTICULAR PURPOSE ARE EXCLUDED. In the event a warranty is created by law,<br />

buyer’s EXCLUSIVE REMEDY sh<strong>al</strong>l be the replacement <strong>of</strong> any defective product. No other remedy (including,<br />

but not limited to, incident<strong>al</strong> or consequenti<strong>al</strong> damages for lost pr<strong>of</strong>its, lost s<strong>al</strong>es, injury to person or property, or<br />

any other incident<strong>al</strong> or consequenti<strong>al</strong> loss) sh<strong>al</strong>l be available to buyer.<br />

Some States do not <strong>al</strong>low the exclusion <strong>of</strong> implied warranties or do not<br />

<strong>al</strong>low the exclusion or limitation <strong>of</strong> incident<strong>al</strong> or consequenti<strong>al</strong> damages,<br />

so the above limitations and exclusions may not apply to you. This warranty<br />

gives you specific leg<strong>al</strong> rights, and you may <strong>al</strong>so have other rights which<br />

vary from State to State.<br />

Epifanes North America Inc.<br />

70 Water Street<br />

Thomaston, Maine 04861<br />

U.S.A.<br />

tel. 800-269-0961<br />

fax. 207-354-0387<br />

http://www.epifanes.com

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!