EICTA "HD TV" LOGO LICENSE AGREEMENT - DigitalEurope

HDTVrevised – RC001
Section 2 – compliance statements for television receivers without a display for video
reproduction
Not applicable for television receivers with a display for video reproduction.
Description Choice Value
Requirement 8/9
In case the device supports reception of signals some of which require content protection to
permit HD quality output,
supports DVI with HDCP according to [14] and [16] AND/OR Y/N/na
supports HDMI with HDCP according to [15] and [16]
Indicate which output(s) support requirement 8/9
Text
below
Requirement 8
In case the device does not support reception of any signal which requires content protection to
permit HD quality output,
supports DVI according to [14] (no HDCP required) AND/OR Y/N/na
supports HDMI according to [15] (no HDCP required) AND/OR
supports analogue YPbPr according to [17]
Indicate which output(s) support requirement 8
Text
below
In case the television receiver supports Conditional Access
indicate why the user may not expect to receive signals requiring
content protection permitting HD quality output
Text
below
Requirement 10
Can reproduce any HD source (television broadcast) on its HD outputs
in at least one of the following HD formats and timings with a 16:9
aspect
ratio:
a) 1280x720 @ 50Hz progressive
b) 1920x1080 @ 50Hz interlaced
Requirement 11
The television receiver provides a mode in which it delivers 1920x1080i
50Hz HD sources (television broadcasts) in their original format
(unscaled) and timing on its HD output(s)
The television receiver provides a mode in which it delivers 1280x720p
50Hz HD sources (television broadcasts) in their original format
(unscaled) and timing on its HD output(s)
Indicate how the user can direct the television receiver to produce the
originally received format on its output(s).
Y/N
Y/N
Y/N
Text
below
“HD TV” LOGO LICENSE AGREEMENT Page 19 of 29