Colorado - bei Karmann Mobil

7-2
WATER SUPPLY AND DISPOSAL
Fresh water supply
Discharge tap for fresh water
The discharge tap for fresh water is in the
outer storage box.
Remove the cleaning closure of the tank and
pull out the discharge plug. The second tank
(optional) is supplied with a separate plug.
Pump for fresh water system
The Colorado has a pump which supplies the
necessary pressure to the fresh water
system. In the Colorado 550, 650, 675TI
models this pump is located under the table
in the technical equipment space. In the
Colorado 600 and 660 it is on the passenger
body in the storage compartment next to the
kitchen, and in the Colorado 625TI, 655TI,
665 TI it is under the bench seat.
Filter (A) should be cleaned at least once a
year under running water. Discharge the
fresh water from the system before cleaning
the filter.
Notes
Empty the fresh water tank as described
above. Open all taps into the central
position between "hot" and "cold" and
pump out the water remaining in the
pipes.
Then switch off the pump and separate
the pipe system from the inlet and outlet of
the pump (inlet connection: double wing
rotary connector piece / discharge
connection: stainless steel clip).
Lay down a cloth in the region of the
pump. Switch the pump on again and
empty the pump itself.
Caution
Do not reattach the pipes to the pump
while it is decommissioned.
All taps should remain open in order
to prevent damage.
Notes
Only use clean water to fill the fresh water
tank.