DYNALLOY BRAZING ALLOY RODS

DYNALLOY BRAZING ALLOY
Part No.
812635 (5 lb.)
3/32” x 18”
Part No.
812636 (5 lb.)
1/8” x 18”
Part No.
812638 1/2 lb.
.050 x 1/8” x 18”
Part No.
812640 (5 lb.)
1/8” x 18”
DYNALLOY "C"
SHOP SUPPLIES
DYNALLOY BRAZING ALLOY RODS
Engineered To Exceed The Toughest Demands Of Maintenance And Repair Brazing.
Standard "Production Line" brazing rods are meant to be used under clean, controlled, ideal, new production conditions.
Such conditions rarely occur in the maintenance and repair industry. For this reason.
DYNALLOY BRAZING ALLOYS
Are engineered to exceed the tough demands of maintenance and repair brazing. The dirty, and out-of-position work;
everyday problems experienced in maintenance and repair brazing and welding.
Dynalloy brazing alloys satisfy the toughest maintenance brazing requirements even for beginners. Dynalloy brazing
alloys are the finest quality, most technically advanced, professional maintenance and repair brazing alloys ever made
available.
• Stainless Steel • Cast Iron • Aluminum • Bronze •
• Zinc Pot Metal • Copper • Steel • Brass •
● Outstanding wetting action on steels, cast iron
and copper.
● Superior brazability.
Superior low temperature, copper base brazing
alloy for steel, cast iron and copper alloys. Good for
dissimilar combinations. Outstanding wetting action
on cast iron and rusty, contaminated surfaces. Ideal
for thin sheet metal. Flux coating is very dur able
and resistant to moisture.
Applications: Car bodies, sheet metal, galvanized
steel, duct work, pipes and flanges, cast iron housings.
Bonding temperature: 1400°-1600°F
Tensile strength: 65,000 P.S.I. (760°-871°C)
Hardness: 95BHN
DYNALLOY "SC"
● Contains silver. ● Copper, brass
● Super wettability and flow. and bronze
● Lowest temperature. brazing alloy.
Superior copper, brass and bronze brazing alloy.
Thin-flowing and low temperature. Provides strong,
leak-proof joints. Self fluxing on copper. Use flux on
brass and bronze (Part Number 812692 Flux is recommended).
Applications: Electric motors, heat exchangers, air
con ditioning, refrigeration, joining copper bus bars,
lap joints in pickling and plating installations, fill
holes, cracks in brass and bronze housings.
Bonding temperature: 1185°F (640°C)
Tensile strength: 85,000 P.S.I.
Elongation: 24%
DYNALLOY "SHS"
● Super high strength torch alloy for all steels.
● Superior wettability.
Joins all steels including tool steels. Thin-flowing,
high strength and low temperature. Also for carbide
tipping. Flux coating is very durable and moisture
resistant. Extremely high tensile strength.
Especially for steel over 1/8" thick.
Applications: Close fitting joints in tubing, piping
and framework. Ideal for chrome-moly tubing
assemblies on race cars, motorcycles and bicycles.
For repairing broken drills, making drill extensions,
repairing milling cutters and reamers. For brazing
tungsten carbide tipped tools.
Bonding temperature: 1400°-1600° (760°-871°C)
Tensile strength: Up to 105,000 P.S.I.
Hardness: 150BHN
Part No.
812646 2 lb.
3/32 x 18”
DYNALLOY "A"
● Repairing and fabricating thin gauge aluminum.
● Thin-flowing.
● Low temperature.
High strength aluminum brazing alloy with fast flowing
properties. Ideal for thin gauge aluminum sheet
and tubing. Superior capillary action. Con forms to
intricate shapes and contours. Fast flow ing and
quick freezing. Use with Part Number 812693
Aluminum Flux.
Applications: Tubing assemblies, vats, doors, windows,
frames, containers, electrical connections,
trays, kettles, furniture, auto bodies, trailer walls,
truck bodies, boats and thin wall castings.
Bonding temperature: 1070°F (576°C)
Tensile strength: 34,000 P.S.I.
Color match:. Excellent (will darken if anodized)
Corrosion resistance: Equal to base metal.
DYNALLOY "AFC" (FLUX CORED CENTER)
Part No.
812647 1/2 lb.
1/8” x 30”
● Bead forming or build-up alloy for aluminum.
● Continuous non-stop brazing.
High strength, low temperature aluminum brazing
alloy with an activated flux cure in the center.
Formulated for cast, sheet, and wrought aluminum.
Superior build-up or bead-forming properties. Ideal
for poor-fit or wide-gap joints. Good for out-of-position
work. Use Part Number 812693 Flux if additional
flux is required.
Applications: Aluminum castings, housings, vats,
kettles, truck bodies, trailer floor plates, joining dissimilar
gauges, restoring missing or worn parts and
fabrication.
Bonding temperature: 1050°-1100°F
(571°-593°C)
Tensile strength: 34,000 P.S.I.
Color match:. Excellent (will darken if anodized)
Corrosion resistance: Equal to base metal.
© Copyright 2008. All rights reserved.
No portion may be copied or reproduced in any manner.
D13-1
REVISED JUNE, 2008

SHOP SUPPLIES
SOLDERING/BRAZING ACCESSORIES/MIG WELDING WIRE
BLOC - IT
Heat absorbing paste
Prevents distortion to light gauge metals during
brazing or welding. Protects painted or finished
surfaces from adjacent soldering, brazing or welding.
Protects rubber and plastic components in ball,
dielectric and solenoid valves during soldering.
● Absorbs surface heat - protects adjoining surfaces that may be
damaged by heat.
● Safe to use: non-toxic, non-asbestos, odorless and harmless to
skin.
● Easy to use: apply directly from tube.
● Easy to clean: wipe off with cloth or wash off with water.
Leaves no stains.
Part No. 211116
10 oz. net wt. tube
DYNALLOY FLUXALL SOLDERING FLUX
● Versatile, general purpose liquid soldering flux.
● Highly active - sweeps away oxides.
● Improves wetting and overall performance of all soft solders.
● Removes easily with hot water.
Part No. 812691
4 fl. oz.
C-FLUX PASTE
Pre-cleans, pre-tins
For solder joining copper tubing. Spread on
components, assemble, apply heat. When
C-FLUX turns silvery, touch solder to the
joint and the job is done.
● 95/5 tin/antimony - Lead free, no harsh chemicals.
● Contains alloy solder - cleans, fluxes and tins at
the same time.
● Fast and easy to use - cleaner, quicker joints with
less solder waste, no black, bubbly residue.
● Use on all metals, except aluminum and stainless.
● Melt range of 360°F to 525°F.
Part No. 812690
3 oz. net wt. jar
DYNALLOY SILVER BRAZING FLUX PASTE
● For use with Dynalloy "S" and "SC" Brazing Alloy and
similar brands.
● For use on cast iron, malleable iron, steel, copper,
brass, bronze, nickel, inconel, monel, stainless steel.
● Remains molten and active over a broad temperature
range for maximum cleaning action.
● May be removed with hot water.
Part No. 812692
1/2 lb. net wt.
LEAD
FREE
DYNALLOY "A" ALUMINUM FLUX POWDER
● For use on any weldable sheet, wrought and cast forms of
aluminum.
● Can be used with other types of aluminum brazing alloys.
● Acts as a temperature indicator since it will melt into a
clear liquid at exactly the correct brazing temperature.
● Can be used as a powder or (mixed with a little water) as
a paste.
Part No. 812693
1/4 lb. net wt.
● 35% STRONGER than ordinary high strength steel wire (standard H.S. wire yields 58,000 to
60,000 PSI tensile strength.)
● Excellent results on rusted, thinly scaled steels.
● Ideal for deep penetration.
● High tensile strength makes this wire more compatible with today's high strength steels than
ordinary MIG welding wires.
● Use 75% ARGON - 25% CO2
Tensile strength: 80,000 P.S.I.
● Mild steel wire for use on low and medium carbon steel.
● Contains silicone and manganese.
● Excellent for welding over rust and scale.
● Fluid weld puddle and flat beads.
● Minimum build up, less grinding required.
● Use with C02. 75% Argon - 25% C02, or Argon - Oxygen Yields higher strength when Argon is
the main shielding gas because less manganese and silicone is burned out.
● AWS Class - ER7OS-6
Tensile strength: 60,000 P.S.I.
● Excellent for anodized aluminum and general aluminum repair
● Wire has clean, bright, smooth finish that assures trouble free feeding
● Produces porosity free welds
● Uniform bead shape with excellent penetration
● Superior cracking resistance and maximum strength
● Use with 100% Argon gas.
● A unique blend of AWS 4043 and AWS 5356
Tensile strength: 35,000 P.S.I.
SUPER HIGH STRENGTH MIG WELDING WIRE
Ideally suited for automotive frame work and body "sectioning".
PART DIAMETER PER
NUMBER
SPOOL
812826 .030 10 lbs.
812827 .035 10 lbs.
GENERAL PURPOSE MIG WELDING WIRE
PART DIAMETER PER
NUMBER
SPOOL
812833 .023 11 lbs.
812834 .030 11 lbs.
ALUMINUM MIG WELDING WIRE
PART DIAMETER PER
NUMBER
SPOOL
812831 .030 1 lbs.
D13-2
REVISED MARCH, 2005
© Copyright 2008. All rights reserved.
No portion may be copied or reproduced in any manner.

SHOP SUPPLIES
MAGNALLOY ARC WELDING ELECTRODES
MAGNALLOY WELDING ELECTRODES
A superior quality, maintenance welding system, designed to eliminate problems frequently encountered
in maintenance and repair.
Engineered to produce fast, clean, X-ray quality welds.
Designed for the maintenance welder - providing excellent results, even on rust
or grease-covered metals.
Use Magnalloy Arc Welding Electrodes for:
● All-purpose maintenance and repair welds.
● Self-hardening overlay for abrasion and
impact resistance.
● Machinable cast iron welding.
● Cutting, piercing, gouging.
● Welding aluminum and stainless steel.
THERE IS A GREAT DIFFERENCE BETWEEN
OUR MAGNALLOY MAINTENANCE ALLOYS AND
STANDARD PRODUCTION ROD....BECAUSE THERE
IS A GREAT DIFFERENCE
BETWEEN MAINTENANCE WELDING AND
PRODUCTION WELDING!
MAINTENANCE WELDING IS EXTREMELY COMPLEX
PRODUCTION WELDING IS GREATLY SIMPLIFIED
1. The metal to be welded is often rusty, oily or painted.
2. Many welds must be made that fit poorly, or arc in hard to reach places.
3. The exact chemistry of the metals to be welded is rarely known, and often
dissimilar.
4. The maintenance repair welder must weld cast iron, stainless, tool or alloy
steels with equal skill, precision and speed.
1. The metal to be welded is clean, degreased, and cut to fit.
2. Special jigs and fixtures are used to insure consistent application.
3. Production welding matches a single electrode to a metal of known analysis.
4. Repeated daily welding in the same manner makes production welding easy.
OUR MAGNALLOY WELDING ELECTRODES ARE MADE SPECIFICALLY FOR MAINTENANCE WELDING
Most production rod is a standard formulation product, mass produced for the narrow needs of the production line welder.
Our Magnalloy maintenance welding alloys are individually designed to meet specific needs, and to overcome the unique problems of repair welding.
High quality, Magnalloy specialty alloys produce stronger, X-ray quality welds. Application is faster and easier in all of the difficult and varying maintenance welding situations.
MAGNALLOY SUPER STRENGTH ALLOY
AC-DC REV.
PART DIA. AMPS APPROX. TENSILE PACKAGE
NUMBER RODS/LB. STRENGTH SIZE
812650 3/32 50 - 80 23 125,000 PSI 4 lbs.
812651 1/8 75 - 110 14 125,000 PSI 4 lbs.
812652 5/32 90 - 140 9 125,000 PSI 4 lbs.
MAGNALLOY HI-STRENGTH ALUMINUM
DC REV.
PART DIA. AMPS APPROX. TENSILE PACKAGE
NUMBER RODS/LB. STRENGTH SIZE
812654 3/32 50 - 90 67 35,000 PSI 2 lbs.
812655 1/8 80 - 130 33 35,000 PSI 2 lbs.
812656 5/32 110 - 150 23 35,000 PSI 2 lbs.
MAGNALLOY UNIVERSAL STAINLESS
AC-DC REV.
PART DIA. AMPS APPROX. TENSILE PACKAGE
NUMBER RODS/LB. STRENGTH SIZE
812660 1/8 80 - 120 14 98,000 PSI 2 lbs.
All steels; cast, tool, high alloy; dissimilar steels.
Super strength alloy
● All position - all type steels.
● High strength - high elongation.
● Carbon, spring, tool and die, high alloy steels.
Super strength, crack resistant electrode for joining all steels with easy weldability. For difficult
to weld “problem Steels” and steels of unknown chemistry. For tool steels, spring steels, and
alloy steels. Ideal for dissimilar combinations. Withstands shock, impact, vibration, heat and
corrosion. Rockwell B 85-100.
Applications: Use on springs, dies, drive shafts and gears, shovel buckets, and rollers.
Especially effective as an underlayment for hard facing alloys, such as those found in the construction
and mining industries. Truck bodies and tailgates. Joining and reinforcing maintenance
steels, galvanized plate and painted machine parts. Gear teeth, pinions, shafts, truck
main frames, springs, construction equipment, dies, tools and molds. Axle housing, main frame
and lift arms of earthmoving equipment, bucket teeth and edges.
All position, all types of aluminum and aluminum alloys.
Welding all types of aluminum
● Castings, forgings, tubing, sheet. ● Exceptionally smooth, dense, porosity free deposits.
High strength electrode for welding aluminum and aluminum alloys. Easy weldability and fast
deposition. Bead appearance is good - spatter-free and porosity-free.
Applications: For any cast, wrought, or extruded aluminum including cylinder beads and
blocks, trailer “landing gears”, tanks, dock plates, loading skids, and foundry casting repairs,
truck bodies, pipes piston, motor blocks, machine bases and castings, transmission cases,
dump bodies, and framework.
Stainless steels, join stainless to mild steels, dissimilar steels.
All position - welding all grades stainless steel
● Low amperage - will not burn through.
● Corrosion and heat resistant.
Universal stainless steel electrode with exceptional weldability. Use on all stainless steel types,
as well as dissimilar combinations. Ideal for stainless alloys of unknown chemistries. Provides
smooth spatter-free deposits. Low amperage requirements help eliminate warpage, distortion,
and burn through problems.
Applications: Furnace parts, chemical vats plating tanks and dairy equipment. Tubing and
pipe.
© Copyright 2008. All rights reserved.
No portion may be copied or reproduced in any manner.
D13-3
REVISED MARCH, 2005

SHOP SUPPLIES
MAGNALLOY ARC WELDING ELECTRODES
MAGNALLOY CUT, GROOVE & GOUGE
All metals except magnesium
● Cutting, chamfering and gouging all metals.
● Coating is designed to withstand high amperage.
Cutting and piercing holes in all metals including aluminum, cast iron, and stainless steels.
Ideal for cutting out rivets, cutting angle or bar stock, piercing holes prior to drilling. Use with a
standard electrode holder. Gouging and grooving all metals including cast iron, aluminum and
stainless steel. Ideal for removal of old welds or veering out cracks prior to repair.
Applications: For quick removal and cutting of both ferrous and non-ferrous materials. Can be
used to cut off bolts or rivets, fro piercing holes and beveling or veering cast iron, nickel copper
and aluminum.
AC-DC STR. (ELECTRODE–)
PART DIA. AMPS APPROX. PACKAGE
NUMBER RODS/LB. SIZE
812662 1/8 250 - 350 12 4 lbs.
MAGNALLOY UNIVERSAL MILD STEEL
Mild and low carbon steels, sheet metal castings.
● All purpose - all position - all mild steels.
● High strength - low amperage.
● Excellent for thin sheet metal and galvanized.
Superior “general purpose” mild steel welding electrode. Outstanding weldability. Welds in all
positions. May be used on rusty, contaminated steels, thin sheet metal and heavy sections, and
AC-DC REV.
galvanized.
Applications: For maintenance welding of low carbon steels such as sheet metal angle iron, PART DIA. AMPS APPROX. TENSILE PACKAGE
NUMBER RODS/LB. STRENGTH SIZE
automobile bodies, conveyor parts, steel parts, steel tanks, and structural members. High pressure
ducts, tanks, machinery parts, construction work.
812675 3/32 40 - 70 23 80,000 PSI 48 lbs.
812676 1/8 70 - 120 14 80,000 PSI 48 lbs.
812677 5/32 110 - 140 9 80,000 PSI 48 lbs.
MAGNALLOY HARD FACE & WEAR ALLOY
Hard facing, severe abrasion and impact.
● Multiple wear alloy - up to 60Rc.
● Abrasion, impact, metal-to-metal wear.
● Base metals - carbon steels, stainless steels manganese steels, cast iron.
Superior high hardness overlay. Resists abrasion and impact at both high and low temperatures.
Superior weldability. Smooth ripple-free deposits. For stainless steels, carbon and alloy
AC-DC REV.
steels and cast irons. Up to 60 Rockwell hardness.
Applications: Perfect for repairing dipper teeth, shovel buckets and teeth, impactors, bearing
PART DIA. AMPS APPROX. PACKAGE
NUMBER RODS/LB. SIZE
journals, cultivator shoes, steel mill roll end. Finger crushers and exhaust fans in steelworks,
screw heads in the ceramic industry. Very high compressive strength. Best choice for overlaying
construction equipment.
812681 5/32 100 - 150 9 2
812680 1/8 90 - 130 14 2 lbs.
lbs.
MAGNALLOY CROSS REFERENCE CHART
PART EUTECTIC (PREMIER) NASSAU LAWSON (NAT’L CHEM BOWMAN KAR MECHANICS
NUMBER CERTANIUM ROCKMOUNT CRONATRON SEARCH) CHOICE
XERGON
Super 680 720 Brutus A WR 300 100 XL 25180 74335 Torque III
Strength 680 CGS 707 333 990 72824 Torque IV
Alloy 3026 770 MX 333U 72825
Xuper 110
Hi-Strength Eutectrode 608 Neptune A 510 141 25360 73551 Torque
Aluminum 2101 980 Aluminum
Universal Eutectrode 711 Gemini A 338 25370 25310 Torque XI
Stainless 54-L, 53-L 709 Gemini B 377 895 920 Torque XII
Stain-AMO
Stain-B
Cut, Groove Cutrode 100 Electra 110 161 25370 74336 Torque
and Gouge Chamfertrode 920 74337 Gouge Cut
Exotrode
Universal 66, 666 701 Tartan A WR 350 106 25120 72826 Torque I
Mild Steel 600NH, 777 702 Tartan B 5350 25140 72827 Torque II
Alloy 3001 311, 321 885 73550
Beautyweld 325, 338 74516
Steeltectic
Hard Face Eutectrode NZ 299 Apollo A 777 174 25330 Torque IX
and Wear 4-40 176 285
Alloy N90 290
MAGNALLOY PACKAGING GUARANTEES ABSOLUTE FRESHNESS
No matter what quantity you purchase package contains individual poly sealed, moisture-proof packets.
D13-4
REVISED MARCH, 2005
© Copyright 2008. All rights reserved.
No portion may be copied or reproduced in any manner.

#63 HOT AIR WELDER
PART COMPOSITION COLOR SIZE QUANTITY
NUMBER
812851 Polyurethane Natural 1/8" 1/2 lb.
812852 Polyurethane Natural 5/32" 1/2 lb..
812853 Polyurethane Natural Ribbon 1/2 lb.
812854 Polypropylene Black 1/8" 1/2 lb.
812855 Polypropylene Black 5/32" 1/2 lb.
812856 Polypropylene Black Ribbon 1/2 lb.
812857 A.B.S. Blue 1/8" 1/2 lb.
SHOP SUPPLIES
WELDING / SOLDERING / BRAZING
● 500 watt, 120 volt heating element.
● Pressure gauge and regulator.
● Round tip for 1/8", 5/32" and 3/16" rods.
Part No. 812823
THERMOPLASTIC WELDING ROD
SEELYE Plastic Welding Equipment
● Tacking tip for assembly prior to welding.
● Includes tray, carrying case and instructions.
THIS PRODUCT IS WARRANTED BY THE MANUFACTURER
Warranty information will be sent to you with the merchandise. Copies may be obtained for inspection upon request. If
applicable, warranty registration form must be completed and returned to the manufacturer, as directed, to place warranty in
effect.
We are the seller of the merchandise, and cannot accept return of this, or other products warranted by the manufacturer.
Returns must be made directly to the manufacturer following warranty instructions.
NOTE: Round rods are used as filler material after properly grooving weld area in a "V" shape.
Ribbon is used on reverse (non-visible) side of part to be repaired, to build-up and support weaker areas.
PART COMPOSITION COLOR SIZE QUANTITY
NUMBER
812858 A.B.S. Blue 5/32" 1/2 lb.
812859 A.B.S. Blue Ribbon 1/2 lb.
812861 Polyethylene Brown 5/32" 1/2 lb.
812862 Polyethylene Brown Ribbon 1/2 lb.
812863 Vinyl Gray 1/8" 1/2 lb.
812864 Vinyl Gray 5/32" 1/2 lb.
812865 Vinyl Gray Ribbon 1/2 lb.
PROFESSIONAL MODEL TS7000, SELF-IGNITING TORCH
For soldering, brazing, heating, and paint removal.
● Piezzo electronic ignition - instant on, instant off,
no flints, batteries, strikers or matches required.
● Built in regulator and adjustable flame control
knob.
● Burns propane or MAPP gas - up to 13000 BTU
with capability to reach over 3000° F. More heat
than any other portable torch.
● Soft solder up to 4" diameter copper pipe with
propane gas. Braze and silver solder up to 1-1/4"
diameter copper pipe using MAPP gas.
Part No. 213350
Torch Head (gas not included)
WELD-FLEX SUPER FLEXIBLE WELDING CABLE
THE FINEST WELDING CABLE AVAILABLE
Excellent for Heavy Duty Battery and Jumper Cables
PENCIL FLAME TORCH
● Produces a 1/2” diameter pencil flame.
● Brass construction for durability.
● Fuel control knob.
Part No. 213351
WARNING: ALWAYS wear safety goggles, gloves and other appropriate safety items for protection.
● Rope stranded ultra-thin No. 32 AWG annealed copper wire.
● Conforms to all international specifications.
● High flexibility of conductor and jacket makes handling extremely easy.
● Double cover jacket of PVC inner core, NBR (acrylonitrile rubber) outer jacket
exceptionally tough and durable, very resistant to abrasion, oil, heat, ozone,
and most solvents.
Sold by the foot.
Custom cut lengths to meet your requirements.
Minimum order: 10 feet
6 4 2 1/0 2/0
Actual Diameter
© Copyright 2008. All rights reserved.
No portion may be copied or reproduced in any manner.
PART GAUGE APPROX. # CURRENT
NUMBER OF WIRES RATING (AMPS)
310225 6 415 124
310226 4 660 162
310227 2 1050 279
310228 1/0 1670 390
310229 2/0 2107 416
NOTE: For more cable products see page E11-4.
D13-5
REVISED MARCH, 2005

SHOP SUPPLIES
WELDING ACCESSORIES
Weld cleaning tools
● Extra wide blade design. ● Extra slim tapered cones. ● Heavy duty handles shaped to fit
hand.
LONG NECK HAMMER
● Unique new long neck head design.
● Hickory handle.
● Excellent balance.
● Protects handle from splintering
when working over an edge.
Cone & chisel.
Part No. 412202
Long neck
protects handle.
CHIPPING HAMMERS
● Hardened heads.
PINNED HEAD HAMMERS
● Spring steel handle. ● Pinned heads won’t fly off. ● Won’t transmit heat.
Chisel & Cross
Chisel
Cone & Chisel
● 2 tools in one - chisel 7
replacement brush.
● Spring steel handle.
● Wire bristle brush.
● Triple welded brush frame for
break resistance.
DUAL HAMMER
Part No. 412206
Cone & Cross
Chisel
PART
Part No. 412203 Part No. 412204 Part No. 412205
● Trimmed for maximum abrasive action.
DESCRIPTION
NUMBER
412208 Stainless steel wire brush
812156 Steel wire brush
● Insures clean hot flames.
● Use of tip cleaners keeps welding and cutting
tips free from slag and spatter.
● New design provides 60 or more cleaning
edges per inch.
● Rounded cleaning surfaces won’t jam or
cut.
● Straight sided valleys insure thorough
cleaning by removing all waste.
● Will not damage tip ports by scratching or
deforming.
● Large 1 square inch file area.
● Large diameter spark flint.
● Cartridge holding flint locks
exactly into position.
WIRE SCRATCH BRUSHES
● Top quality wire.
CLEANER
NUMBER
SPARK LIGHTER
1-1/4” trim
TIP CLEANER KIT
FOR DRILL
HOLE SIZE
7 75-74
8 73-72-71
10 70-69-68
12 67-66-65
14 64-63-62
15 61-60
HEAVY DUTY WELDING GLOVES
● Heat resistant.
● 4-1/2” heavy safety cuff.
● Heavy top quality leather - palm, back,
fingers, cuff.
● Fully lined.
● Wing thumb.
● Gunn pattern.
● Seamless back.
● 12-1/2” overall length.
PART
DESCRIPTION
NUMBER
412211 Spark lighter
412212 Replacement flints 6
Part No.
312113
CLEANER
NUMBER
FOR DRILL
HOLE SIZE
16 59-58
17 57
18 56
22 55-54
24 53-52
26 51-50-49
10” x 1-1/8” block
4 x 6 rows
Part No.
412210
12 cleaners & 1 file
for 27 drill hole sizes
SOAPSTONE AND HOLDER
● For marking cutting lines and
weld areas
PART
DESCRIPTION
PART
NUMBER
Shoe handle
design
NUMBER
412213 Round aluminum soapstone holder
with pocket clip & one soapstone
412214 Soapstone refills 6
CABLE CONNECTOR SET
● Add on - take off cable.
● Splice or repair cable.
● Shorter cable - save wear & tear.
● Save operator’s time.
● Remove cable to prevent theft.
● Neoprene covers.
● Attaches with 7/32” hex wrench.
CABLE
CAPACITY
412217 4, 2, 1, 1/0
412218 1/0, 2/0, 3/0
Each set includes:
1 male connector 1 female connector 1 pair Neoprene covers
Order 1 set for each cable
D13-6
REVISED APRIL, 2006
© Copyright 2008. All rights reserved.
No portion may be copied or reproduced in any manner.

SHOP SUPPLIES
WELDING ACCESSORIES and SUPPLIES
ELECTRODE HOLDER
Part No.
412215
DOUBLE-LOCK GROUND CLAMP
Part No.
412216
● 9-5/8” long.
● 19 oz.
● Cable size: 2/0.
● Hard fiber handle.
● Electrode thru 1/4”
diameter.
● High production
250-300 amp capacity.
● Manufactured of 98%
pure copper alloy, heat
treated, fiber glass
insulators.
● Provides superior
conductivity.
● High clamping
pressure.
● Large, flat contact
surface.
● Long levered handles.
● 300 amp capacity.
● Cable size: 1/0 & 2/0.
● Jaw opening: 1-1/4”
SUPER KOOL AND SUPER SLIM
WELDING HELMET
The only helmet designed to improve a welder’s environment.
Part No. 812525
(Plates not included)
LENSES AND PLATES
● Ultimate shield against infra-red and ultra-violet
radiation.
● Superior visibility compared to standard green
lenses.
● Reduces eye strain and fatigue.
● Highly improved view of weld puddle.
WARNING:
Always replace pitted or scratched protective
lenses and plates. Always use a clear cover
plate over lenses.
● Super tuff nylon is lighter than fiber
glass yet virtually indestructible in use!.
● Drop down ratchet head gear adjust
easily to fit any head size.
● Improved headband is 10 times more
absorbent than ever before. And it’s
now included with ratchet headgear at
no extra cost!
● Super slim’s trim, compact design is
perfect for welding in confined areas.
● Rigid trim deflects welding spatter from
chest area, improves helmet rigidity.
● Extended crown offers 50% greater
overhead protection than conventional
helmets.
● 2’’ x 4-1/4’’ plate size.
● Nylon lift front plate retainer.
● Super kool coating makes super slim
30% cooler than uncoated helmets,
sheds welding spatter without burning.
Helmet and goggles meet ANSI Z87; 1-1979 specifications.
FLIP FRONT GOGGLE
● Soft, flexible frame contains
effective air circulation system.
● Flexible vinyl construction.
● Adjustable elastic head band.
● Fits over eye glasses.
● Hinged, lift-front door.
● 2” x 4-1/4” lens (Gold shade no.
5 included).
● Lens plate can be easily
Part No. 412226
changed.
FLASH GLASSES
● Provides flash protection
against infrared radiation.
● Worn under welding helmets.
● Adjustable temples.
● Green perforated side shields.
● Universal bridge.
● Durable ebony frame.
● Heat treated dark green glass
lenses.
Part No. 812544
● Large 40mm eye size.
PART SIZE USE WITH
NUMBER INCHES COLOR MATERIAL PART NUMBER
812531 2 x 4-1/4 No. 5 Green Impact resistant plastic 412226 2
812532 2 x 4-1/4 No. 6 Green Impact resistant plastic 812525 2
812533 2 x 4-1/4 No. 9 Green Impact resistant plastic 2
812534 2 x 4-1/4 No. 10 Green Impact resistant plastic 2
812535 2 x 4-1/4 No. 11 Green Impact resistant plastic 2
812536 2 x 4-1/4 No. 12 Green Impact resistant plastic 2
812538 2 x 4-1/4 Clear Impact resistant 2
plastic plate
812539 2 x 4-1/4 Clear-Cover CR-39 cover In front of filter 6
plastic plate Lens all 2 x 4-1/4
412223 4-1/2 x 5-1/4 Clear Cover plate 3
412222* 4-1/2 x 5-1/4 No. 10 Gold Polycarbonate
812543* 2 x 4-1/4 No. 10 Gold Polycarbonate
412224* 2 x 4-1/4 No. 5 Gold Polycarbonate
* Special gold reflective coated lenses.
COLOR SELECTION GUIDE
SHADE STD. VISIBLE ULTRA-VIOLET INFRA-RED
NO. TRANS. TRANS. TRANS. RECOMMENDED USES
3.0 13.9% less than 0.5% 0.9% Glare of reflected sunlight from snow, water, sand, etc.; Strong light from cutting and welding,
metal pouring, and work around furnaces and foundries.
5 1.93% none less than .01% Light acetylene welding, cutting up to 1 inch; torch brazing; light electric spot welding.
6 0.72% none less than .01% Medium cutting, 1 inch to 6 inches; light acetylene welding up to 1/8’’ inch; arc welding up to 30 amperes.
9 0.037% none less than .01% Heavy gas welding 1/2’’ and over; arc cutting and welding between 30 and 75 amps.
10 0.0139% none less than .01% Shielded metal-arc welding 1/16, 3/32, 1/8, 5/32 inch electrodes. Arc welding - 75-200 amperes.
11 0.0052% none less than .01% Inert-gas metal-arc welding (non-ferrous) - 1/16, 3/32, 1/8, 5/32 inch electrodes. Arc welding - 75-200 amperes.
12 0.0019% none less than .01% Inert -gas metal arc welding (ferrous) - 1/16, 3/32, 1/8, 5/32 inch electrodes.
Shielded metal-arc welding 3/16’’, 7/32, 1/4 inch electrodes between 200 and 400 amperes.
© Copyright 2008. All rights reserved.
No portion may be copied or reproduced in any manner.
D13-7
REVISED MARCH, 2005

SHOP SUPPLIES
WELDING SUPPLIES
FACE SHIELDS
Greatest protection available.
WINDOWS FOR SHIELDS
Part No.
812557
(Window included)
● Drop down ratchet head gear.
● 7” x 19” x .040 clear window (included).
● Provides extra safety and durability.
● Top and bottom molded plastic caps for full protection.
Part No.
812556
(Order window
separately from
chart to the right)
● Positive lock head gear.
● 2 dimension snap-in locking head gear.
● 8” x 12” x .040 window (not included).
PART SIZE COLOR USED WITH
NUMBER INCHES SHIELD NO.
812558 8 x 12 x .040 Clear 812556
812559 8 x 12 x .040 Green-shade B 812556
812560 8 x 12 x .040 Green-shade C 812556
812561 7 x 19 x .040 Clear 812557
812562 7 x 19 x .040 Green-shade B 812557
812563 7 x 19 x .040 Green-shade C 812557
B - Medium Green C - Dark Green
D13-8
REVISED MARCH, 2005
© Copyright 2008. All rights reserved.
No portion may be copied or reproduced in any manner.