Anti-Seize, Dry Film Lubricant & Coating - Continental Research ...

Moly Coat
Anti-Seize, Dry Film Lubricant & Coating
TECHNICAL DATA SHEET
Fills microscopic voids in metal for long-lasting
lubrication and protection.
Moly Coat is an anti-seize, dry film aerosol lubricant. Made with pure
Molybdenum Disulfide micro-particles that plate out to fill tiny holes
and pits in metal, Moly Coat prevents friction and wear to improve
operating efficiency and reduce maintenance costs. Moly Coat stops
corrosion, seizing, galling, sticking, scraping and other friction issues
that occur in high pressure, load-bearing applications.
• Withstands high heat from -110 ˚F to +1,050 ˚F
• High pressure up to 100,000 psi
• Sticks to metals, rubber, glass, fiberglass and most plastic
• Applies dry and tack free to repel dust
• No sling off, throw off or wash-out
• Resists water, oil, alkalis and acids
• Non-chlorinated, non-corrosive and non-conducive
Applications:
Construction Equipment
Heavy Excavating Equipment
Oil Field Equipment
Manufacturing
Industrial Plants
Waste Water Treatment Plants
Shipyards & Rail Yards
Refineries & Foundries
Lumber Yards
Automotive & Fleet Operations
Bus Garages
Use On:
Gears
Bearings
Compressors
Motors & Engines
Press Fits
Rollers
SKU: 00409
Valves
Turbines
Pumps
Locks & Pins
Taps
Drills
Drive Chains
Conveyors
Cutting Blades
Assemblies
Sliding Surfaces
Rings & Seals
HASSLE FREE BUSINESS SINCE 1967
© 2010 Continental Research Corporation. [063010]

PRODUCT LABEL
Coat is a superior, Moly long-lasting Coat is a superior, dry lubricant long-lasting that adheres dry lubricant to almost that all adheres materials. to It almost all materials. It
tands high temperatures withstands and high pressures, temperatures repels and dust pressures, and dirt repels and is dust resistant and dirt to and is resistant to
r, alkalies and most water, acids. alkalies Moly and Coat most greatly acids. increases Moly Coat operating greatly effi increases ciency and operating effi ciency and
es maintenance reduces costs by maintenance preventing costs corrosion, by preventing seizing, wear, corrosion, galling, seizing, binding, wear, galling, binding,
ing, chattering, squeaking sticking, chattering, and scraping. squeaking It is designed and scraping. for high It pressure, is designed load-bearing for high pressure, load-bearing
cations and is excellent applications for anti-friction and is excellent and anti-seize for anti-friction where a and dust anti-seize and dirt where resistant a dust and dirt resistant
bricant is desired. dry Moly lubricant Coat is able desired. to withstand Moly Coat temperature is able to withstand ranges from temperature -110°F to ranges from -110°F to
0°F and resist pressures +1050°F up and to resist 100,000 pressures psi. It contains up to 100,000 pure Molybdenum psi. It contains Disulfide pure Molybdenum Disulfide
-particles which micro-particles burnish themselves which into burnish metal themselves surfaces and into provide metal surfaces a bonded and dry provide a bonded dry
ating film. lubricating film.
STRIAL APPLICATIONS: INDUSTRIAL Oil APPLICATIONS: Drilling Equipment, Oil Foundries, Drilling Equipment, Automotive Foundries, Plants, Automotive Plants,
le Maintenance, Vehicle Sewing Maintenance, Trades, Paper Sewing and Corrugated Trades, Paper Converting, and Corrugated Chemical Converting, Plants, Chemical Plants,
working, Marine, Woodworking, Agricultural Marine, & Military Agricultural Equipment, & Military Road Equipment, Aircraft Road Equipment, Aircraft
tenance, Steel Mills Maintenance, and Mining Steel Operations. Mills and Mining Operations.
: May be applied USES: wherever May petroleum be applied or wherever synthetic petroleum lubricants or are synthetic not suitable lubricants (except are not suitable (except
en systems). Use oxygen on gears, systems). bellcranks, Use on slides, gears, chutes, bellcranks, bearing slides, surfaces, chutes, press bearing fits, surfaces, press fits,
s, conveyors, cylinder chains, packings, conveyors, shafts, cylinder valve packings, stems, vulcanized shafts, valve rubber stems, molds. vulcanized High rubber molds. High
carrying qualities load assure carrying lubrication qualities under assure extreme lubrication pressures. under Lubricates extreme pressures. construction Lubricates construction
ther heavy equipment. and other Eliminates heavy equipment. chattering and Eliminates scraping. chattering Resists and water scraping. and dirt. Resists water and dirt.
CTIONS: Shake DIRECTIONS: can vigorously Shake before can application. vigorously Surface before must application. be free Surface from loose must be free from loose
oil, grease and old rust, paint. oil, Hold grease can and 8 to old 10 paint. inches Hold from can surface 8 to 10 and inches spray from in a surface sweeping and spray in a sweeping
n to insure a thin motion uniform to insure coating. a thin Allow uniform fi rst application coating. Allow 3 to fi 5 rst minutes application before 3 to 5 minutes before
ing second coat. applying IMPORTANT: second To coat. prevent IMPORTANT: clogging, after To prevent each use, clogging, invert after can each and use, invert can and
a few short bursts spray to clear a few valve. short bursts to clear valve.
GER: Use only in DANGER: well ventilated Use only area. in Do well not ventilated expose to area. heat, Do sparks, not expose or open to heat, flame. sparks, or open flame.
ot puncture or incinerate Do not puncture container. or Avoid incinerate contact container. with eyes Avoid or contact prolonged with contact eyes or prolonged contact
skin. Do not store with at temperatures skin. Do not store above at 120°F. temperatures above 120°F.
NING: This product WARNING: contains This chemicals product known contains to the chemicals State of known California to the to State cause of California to cause
er, birth defects, and cancer, other birth reproductive defects, and harm. other reproductive harm.
TAINS (CAS#): Liquefi CONTAINS ed Petroleum (CAS#): Gas Liquefi (68476-86-8), ed Petroleum Acetone Gas (68476-86-8), (67-64-1), Heptane Acetone (67-64-1), Heptane
60-76-6), Aliphatic (426260-76-6), Hydrocarbons Aliphatic (8052-41-3), Hydrocarbons Toluene (108-88-3), (8052-41-3), Isopropanol Toluene (108-88-3), (67- Isopropanol (67-
), Molybdenum Disulfi 63-0), de Molybdenum (1317-33-5). Disulfi de (1317-33-5).
T AID: FIRST AID:
E CONTACT: Flush IF with EYE CONTACT: large amounts Flush of with cool large running amounts water of for cool at least running 15 minutes water for at least 15 minutes
holding upper and while lower holding lids open. upper If irritation and lower persists lids open. get medical If irritation attention persists immediately. get medical attention immediately.
IN CONTACT: Wash IF SKIN with soap CONTACT: and water. Wash If with irritation soap and persists water. seek If irritation medical persists attention. seek medical attention.
SSIVE INHALATION: EXCESSIVE Remove INHALATION: to fresh air. Remove Seek medical to fresh attention air. Seek immediately. medical attention immediately.
athing stops give If artifi breathing cial respiration. stops give artifi cial respiration.
GESTED: Do not induce IF INGESTED: vomiting. Do Seek not induce medical vomiting. attention Seek immediately. medical attention immediately.
RATING: Health HMIS -2; Flammability RATING: Health -3; Reactivity -2; Flammability -0; Personal -3; Reactivity Protection -0; -B. Personal Protection -B.
OUT OF REACH OF KEEP CHILDREN. OUT OF REACH OF CHILDREN.
MATERIAL SAFETY READ DATA MATERIAL SHEET PROVIDED. SAFETY DATA SHEET PROVIDED.
Moly
Moly
Coat
Coat
Anti-Seize, Dry Film
Lubricant Anti-Seize, & Coating
Dry Film
Lubricant & Coating
• Contains pure • Contains Molybdenum pure Molybdenum
Disulfide micro-particles Disulfide micro-particles which which
burnish themselves burnish into themselves metal into metal
surfaces & provide surfaces a bonded & provide dry a bonded dry
lubricating filmlubricating film
• Prevents friction • Prevents & wear friction to & wear to
improve operating improve efficiency operating efficiency
& reduce maintenance & reduce costs maintenance costs
• Adheres to metal, • Adheres glass, to rubber metal, glass, rubber
& most plastics & most plastics
SOLD BY:
SOLD BY:
DANGER: EXTREMELY DANGER: FLAMMABLE. EXTREMELY HARMFUL FLAMMABLE. OR FATAL HARMFUL OR FATAL
IF SWALLOWED. EYE IF SWALLOWED. AND SKIN IRRITANT. EYE AND CONTENTS SKIN IRRITANT. UNDER CONTENTS UNDER
PRESSURE. SEE OTHER PRESSURE. CAUTIONS SEE OTHER ON BACK CAUTIONS PANEL. ON BACK PANEL.
NET CONTENTS: NET 12 OZ. CONTENTS: (340 G) 12 OZ. (340 G)
HASSLE FREE BUSINESS SINCE 1967
© 2010 Continental Research Corporation. [063010]