Displays for screwdrivers

Witte’s Bit programme.
An optimized torque transmission, high torque resistance and extremely
long working life are not without reason. It all depends on the quality of
the steels, the special hardening and tempering treatments and the perfect
fitting of the bit. Witte’s bit programme does not allow for any compromises
and offers the correct solution for every requirement.
BITFLEX
The narrow recessed waist section reliably absorbs sudden and exceeded
peaks in torque overload. Thereby, a longer working life than
experienced with normal bits.
BITFLEX TIN
This coating has a hardness in the range of 2800 HV - especially
suitable in industrial use for continual screw driving. Due to
their extremely long working life and the lack of constant bit
changing, important cost savings are made.
STANDARD
For screw-driving with high and sudden increasing torque, e.g. when
driving screws with metal fittings into wood and when driving fastening
screws with metric or other threads.
STANDARD E „Extra Hard“
For screw-driving with low and equally increasing torques, e.g. with
wood, tin or plaster board sheets.
74