ZonePRO Install Guide-English - dbx
ZonePRO Install Guide-English - dbx ZonePRO Install Guide-English - dbx
Section 8 Appendix 1260/1261 Analog Inputs: Number of Inputs: Connectors: Type: Impedance (Euroblock): Impedance (RCA): Max input line level: CMRR: Mic Pre gain: Mic EIN: Mic Phantom Power: ZonePRO TM 12 Total (2) Switchable mic or line, (8) RCA, and (1) S/PDIF Euroblock (Line and Mic), RCA (Source) and RCA (S/PDIF) Electronically balanced, RF filtered > 50 kΩ Balanced, >25 kΩ Unbalanced, RF Filtered >25 kΩ Unbalanced, RF Filtered +20 dBu Mic/Line, +12 dBu RCA > 40 dB, typically >55 dB @ 1 kHz 30 to 60 dB > 118 dB, 22 Hz-22 kHz, 150 Ω Source Impedance 15 V Analog Outputs: Number of Outputs: 6 Connectors: Euroblock Type: Electronically balanced, RF filtered Impedance: 120 Ω balanced, 60 Ω unbalanced Max Output Level: +20 dBu A/D Performance: Type: Dynamic Range line: Type IV dynamic range: Sample Rate: D/A Performance: Dynamic Range: dbx Type IV conversion system >113 dB A-weighted, >110 dB unweighted >119 dB, A-weighted, 22 kHz BW>117 dB, unweighted, 22 kHz BW 48 kHz 112 dB A-weighted, 109 dB unweighted System Performance: Dynamic Range: >110 dB A-weighted, >107 dB unweighted, THD+N: 0.003% typical at +4 dBu, 1 kHz, 0 dB gain Frequency Response: 20 Hz – 20 kHz, +/- 0.5 dB Interchannel Crosstalk: >80 dB typical Crosstalk input to output: >80 dB Propagation Delay: 0.6 msec Operating voltage: 100-240 VAC, 50/60Hz Power Requirements: 27 Watts Physical: Weight: Dimensions: 6.0 lbs.(2.7 kg) Shipping weight 8.0 lbs. (3.6 kg) 1.75” H x 7.75” D x 19” W 48
ZonePRO TM 1260m/1261m Appendix Section 8 Analog Inputs: Number of Inputs: Connectors: Type: Impedance (Euroblock): Impedance (RCA): Max input line level: CMRR: Mic Pre gain: Mic EIN: Mic Phantom Power: 12 Total (6) Switchable mic or line, (4) RCA, and (1) S/PDIF Euroblock (Line and Mic), RCA (Source) and RCA (S/PDIF) Electronically balanced, RF filtered > 50 kΩ Balanced, >25 kΩ Unbalanced, RF Filtered >25 kΩ Unbalanced, RF Filtered +20 dBu Mic/Line, +12 dBu RCA > 40 dB, typically >55 db @ 1 kHz 30 to 60 dB > 118 dB, 22 Hz-22 kHz, 150 Ω Source Impedance 15 V Analog Outputs: Number of Outputs: 6 Connectors: Euroblock Type: Electronically balanced, RF filtered Impedance: 120 Ω balanced, 60 Ω unbalanced Max Output Level: +20 dBu A/D Performance: Type: Dynamic Range line: Type IV dynamic range: Sample Rate: D/A Performance: Dynamic Range: dbx Type IV conversion system >113 dB A-weighted, >110 dB unweighted >119 dB, A-weighted, 22 kHz BW>117 dB, unweighted, 22 kHz BW 48 kHz 112 dB A-weighted, 109 dB unweighted System Performance: Dynamic Range: >110 dB A-weighted, >107 dB unweighted, THD+N: 0.003% typical at +4 dBu, 1 kHz, 0 dB gain Frequency Response: 20 Hz – 20 kHz, +/- 0.5 dB Interchannel Crosstalk: >80 dB typical Crosstalk input to output: >80 dB Propagation Delay: 0.6 msec Operating voltage: 100-240 VAC, 50/60Hz Power Requirements: 27 Watts Physical: Weight: Dimensions: 6.0 lbs.(2.7 kg) Shipping weight 8.0 lbs. (3.6 kg) 1.75” H x 7.75” D x 19” W 49
- Page 3: IMPORTANT SAFETY INSTRUCTIONS DECLA
- Page 7 and 8: ZonePRO TM Section 1 - Introduction
- Page 9 and 10: ZonePRO TM Introduction Section 1 1
- Page 11 and 12: ZonePRO TM ZonePRO Designer GUI Sec
- Page 13 and 14: ZonePRO TM ZonePRO Designer GUI Sec
- Page 15 and 16: ZonePRO TM Gettibg Started Section
- Page 17 and 18: ZonePRO TM Gettibg Started Section
- Page 19 and 20: ZonePRO TM Zone Controllers Section
- Page 21 and 22: ZonePRO TM Zone Controllers Section
- Page 23 and 24: ZonePRO TM Cable Specification: EIA
- Page 25 and 26: SELECT A B C D A B C D SELECT A B C
- Page 27 and 28: ZonePRO TM Zone Controllers Section
- Page 29 and 30: ZonePRO TM Link I/O Section 5 CAUTI
- Page 31 and 32: ZonePRO TM Section 6 - Networking N
- Page 33 and 34: ZonePRO TM Networking Section 6 6.4
- Page 35 and 36: ZonePRO TM Networking Section 6 a.
- Page 37 and 38: ZonePRO TM Networking Section 6 6.7
- Page 39 and 40: ZonePRO TM Networking Section 6 6.1
- Page 41 and 42: ZonePRO TM Application Guide Sectio
- Page 43 and 44: ZonePRO TM Application Guide Sectio
- Page 45 and 46: ZonePRO TM Application Guide Sectio
- Page 47 and 48: ZonePRO TM Appendix Section 8 8.2 Z
- Page 49 and 50: ZonePRO TM Appendix Section 8 8.4 Z
- Page 51 and 52: ZonePRO TM Appendix Section 8 The r
- Page 53: ZonePRO TM 640m/641m Appendix Secti
- Page 57 and 58: ZonePRO TM Appendix Section 8 8.8 W
- Page 59 and 60: ZonePRO TM Appendix Section 8 This
Section 8<br />
Appendix<br />
1260/1261<br />
Analog Inputs:<br />
Number of Inputs:<br />
Connectors:<br />
Type:<br />
Impedance (Euroblock):<br />
Impedance (RCA):<br />
Max input line level:<br />
CMRR:<br />
Mic Pre gain:<br />
Mic EIN:<br />
Mic Phantom Power:<br />
<strong>ZonePRO</strong> TM<br />
12 Total (2) Switchable mic or line, (8) RCA, and (1) S/PDIF<br />
Euroblock (Line and Mic), RCA (Source) and RCA (S/PDIF)<br />
Electronically balanced, RF filtered<br />
> 50 kΩ Balanced, >25 kΩ Unbalanced, RF Filtered<br />
>25 kΩ Unbalanced, RF Filtered<br />
+20 dBu Mic/Line, +12 dBu RCA<br />
> 40 dB, typically >55 dB @ 1 kHz<br />
30 to 60 dB<br />
> 118 dB, 22 Hz-22 kHz, 150 Ω Source Impedance<br />
15 V<br />
Analog Outputs:<br />
Number of Outputs: 6<br />
Connectors:<br />
Euroblock<br />
Type:<br />
Electronically balanced, RF filtered<br />
Impedance:<br />
120 Ω balanced, 60 Ω unbalanced<br />
Max Output Level: +20 dBu<br />
A/D Performance:<br />
Type:<br />
Dynamic Range line:<br />
Type IV dynamic range:<br />
Sample Rate:<br />
D/A Performance:<br />
Dynamic Range:<br />
<strong>dbx</strong> Type IV conversion system<br />
>113 dB A-weighted, >110 dB unweighted<br />
>119 dB, A-weighted, 22 kHz BW>117 dB, unweighted, 22 kHz BW<br />
48 kHz<br />
112 dB A-weighted, 109 dB unweighted<br />
System Performance:<br />
Dynamic Range: >110 dB A-weighted, >107 dB unweighted,<br />
THD+N:<br />
0.003% typical at +4 dBu, 1 kHz, 0 dB gain<br />
Frequency Response: 20 Hz – 20 kHz, +/- 0.5 dB<br />
Interchannel Crosstalk: >80 dB typical<br />
Crosstalk input to output: >80 dB<br />
Propagation Delay: 0.6 msec<br />
Operating voltage: 100-240 VAC, 50/60Hz<br />
Power Requirements: 27 Watts<br />
Physical:<br />
Weight:<br />
Dimensions:<br />
6.0 lbs.(2.7 kg) Shipping weight 8.0 lbs. (3.6 kg)<br />
1.75” H x 7.75” D x 19” W<br />
48