ZonePRO Install Guide-English - dbx
ZonePRO Install Guide-English - dbx
ZonePRO Install Guide-English - dbx
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>ZonePRO</strong> TM<br />
Application <strong>Guide</strong><br />
Section 7<br />
Notes - Health Club Application<br />
1. The <strong>ZonePRO</strong> 1260 device is located near the front desk area.<br />
2. ZCs in the weight room and the aerobics room allow source selection and volume<br />
control.<br />
3. The aerobics instructor’s microphone is routed only to the aerobics area as the Priority<br />
source and is simply mixed in as the priority source rather than ducking the primary<br />
source.<br />
4. Feedback Suppression, Compression, and EQ are used on the aerobics microphone to<br />
help improve intelligibility and reduce unwanted feedback in the system.<br />
5. Compression, De-Esssing, and EQ are used to make the paging microphone as<br />
intelligible as possible.<br />
6. The Crossover is used to separate the frequencies for the main and sub speakers in the<br />
aerobics room.<br />
7. The TV feed comes from the treadmill room and is the priority source for that area,<br />
overriding the primary source. Whenever the TV is on, its audio is routed to the<br />
treadmill room and it can also be selected in the weight room.<br />
8. The locker rooms always have the Satellite Music selected as their primary source and<br />
receive paging from the front desk.<br />
9. Automatic Gain Control is used in the treadmill room and locker rooms to keep the<br />
level consistent.<br />
10. Output EQ is used in all zones to make the system sound as good as possible.<br />
37
Change language