Operations Manual - TE 6-A-36-AVR Cordless ... - Brock White
Operations Manual - TE 6-A-36-AVR Cordless ... - Brock White
Operations Manual - TE 6-A-36-AVR Cordless ... - Brock White
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2.10 Li‐ion battery charge status<br />
en<br />
LEDs light constantly LEDs blink Charge status C<br />
LED 1,2,3,4 - C ≧ 75 %<br />
LED 1,2,3 - 50 % ≦ C < 75 %<br />
LED 1,2 - 25 % ≦ C < 50 %<br />
LED 1 - 10 % ≦ C < 25 %<br />
- LED 1 C < 10 %<br />
NO<strong>TE</strong><br />
Indication of the charge status is not possible while the power tool is in operation or immediately after operation.<br />
If the battery charge status LEDs blink, please refer to the information given in section 9, “Troubleshooting”.<br />
3. Insert tools, accessories<br />
Hammer drill bits<br />
Anchor-setting tools<br />
Quick-release chuck for wood and metal drill bits<br />
Keyed chuck<br />
Wood drill bits<br />
Wood drill bits (auger bits)<br />
Metal drill bits (for steel)<br />
<strong>TE</strong>‐C CLICK chuck<br />
Charger for Li-ion batteries C 4/<strong>36</strong><br />
Charger for Li-ion batteries C 4/<strong>36</strong>‐ACS<br />
Charger for Li-ion batteries C 4/<strong>36</strong>-ACS TPS<br />
Battery<br />
Battery<br />
Battery<br />
Battery<br />
Battery<br />
Angular chuck<br />
<strong>TE</strong> DRS‐6‐A dust removal module<br />
Ø 5…16 mm<br />
C-type connection end<br />
With smooth shank, hexagonal shank<br />
With smooth shank, hexagonal shank<br />
Ø 3…20 mm<br />
Ø Max. 14 mm<br />
Ø 3…10 mm<br />
B<strong>36</strong>/2.4 Li‐ion<br />
B<strong>36</strong>/2.6 Li‐ion<br />
B<strong>36</strong>/3.0 Li‐ion<br />
B<strong>36</strong>/3.3 Li‐ion<br />
B<strong>36</strong>/3.9 Li‐ion<br />
C-type connection end<br />
4. Technical data<br />
Right of technical changes reserved.<br />
Power tool <strong>TE</strong> 6‐A<strong>36</strong><br />
Rated voltage (DC voltage)<br />
<strong>36</strong> V<br />
Weight in accordance with EPTA procedure 01/2003 4.0 kg<br />
Dimensions (L x W x H)<br />
344 mm x 94 mm x 215 mm<br />
Drilling speed without hammering<br />
1,010/min<br />
Hammer drilling speed<br />
940/min<br />
4
Change language