Tool selector. Choose the right Hilti tool.

Tool selector 08/2011
Category Tool Dust
removal
available
Basic tool data
Emission Triaxial
sound vibration
pressure value*
level*
Uncertainty
K
Time
to EAV
Time
to ELV
Productivity data
Application Volume till EAV Volume till ELV
Breakers TE 106 DRS-B 90 dB(A) 14 m/s 2 1.5 m/s² 15 min. 61 min. chiseling to the wall 4.1 l 16 l
TE 300-AVR DRS-B 91 dB(A) 13.5 m/s 2 1.5 m/s² 16 min. 64 min. chiseling to the wall 5.0 l 20 l
TE 500 DRS-B 94 dB(A) 12.1 m/s 2 1.5 m/s² 20 min. 82 min. chiseling to the wall 22.1 l 88 l
TE 500-AVR DRS-B 94 dB(A) 10.1 m/s 2 1.5 m/s² 29 min. 118 min. chiseling to the wall 31.8 l 127 l
TE 700-AVR DRS-B 86.0 dB(A) 6.5 m/s² 1.5 m/s² 71 min. 284 min. chiselling to the wall 60.0 l 240 l
TE 706 DRS-B 90 dB(A) 9 m/s 2 1.5 m/s² 37 min. 148 min. chiseling to the wall 41.5 l 165 l
TE 706-AVR DRS-B 87 dB(A) 5.5 m/s 2 1.5 m/s² 99 min. 397 min. chiseling to the wall 111.1 l 444 l
TE 805 DRS-B 90 dB(A) 15 m/s 2 1.5 m/s² 13 min. 53 min. demolition on floor edge 44.4 l 177 l
TE 905-AVR DRS-B 92 dB(A) 8.5 m/s 2 1.5 m/s² 42 min. 166 min. demolition on floor edge 139.8 l 559 l
TE 1000-AVR DRS-B 87 dB(A) 6.5 m/s 2 1.5 m/s² 71 min. 284 min. demolition on floor edge 325.0 l 1300 l
TE 1500-AVR DRS-B 89 dB(A) 12 m/s 2 1.5 m/s² 21 min. 84 min. demolition on floor edge 145.0 l 580 l
TE 3000-AVR no 94 dB(A) 7.0 m/s² 1.5 m/s² 61 min. 244 min. demolition of floor edge 2075 l 8300 l
Combihammer
TE 30-C-AVR no 90 dB(A) 11 m/s2 1.5 m/s² 25 min. 100 min. chiseling to the wall 7.0 l 28 l
TE 30-M-AVR no 90 dB(A) 11 m/s2 1.5 m/s² 25 min. 100 min. chiseling to the wall 7.0 l 28 l
TE 56 DRS-B 92 dB(A) 13 m/s2 1.5 m/s² 18 min. 71 min. chiseling to the wall 14.9 l 59 l
TE 60 DRS-B 96 dB(A) 14 m/s2 1.5 m/s² 15 min. 61 min. chiseling to the wall 12.9 l 51 l
TE 60-ATC DRS-B 99 dB(A) 8.5 m/s2 1.5 m/s² 42 min. 166 min. chiseling to the wall 34.0 l 136 l
TE 70 DRS-B 99 dB(A) 18 m/s2 1.5 m/s² 9 min. 37 min. chiseling to the wall 11.9 l 47 l
TE 76 DRS-B 91 dB(A) 15 m/s2 1.5 m/s² 13 min. 53 min. chiseling to the wall 14.7 l 58 l
TE 80 DRS-B 99.5 dB(A) 8.5 m/s2 1.5 m/s² 42 min. 166 min. chiseling to the wall 56.5 l 225 l
Examples for volume of liter (chiseling to the wall)
Volume in liter Depth in cm Length in cm breadth in cm
1 10 x 5 x 20
2 20 x 10 x 10
5 20 x 5 x 50
10 10 x 5 x 200
20 20 x 10 x 100
50 20 x 20 x 125
100 10 x 50 x 200
500 20 x 50 x 500
How to read the selector.
In this example we compare the TE2-A and TE7-A
cordless rotary hammers.
A dust removal solution (DRS-M) is available for the
TE7-A. The sound pressure level of these tools
is shown in the next column. The next two columns
show the triaxial vibration value required for a risk
analysis and the time the tool can be operated before
reaching the exposure action value (EAV) and the
exposure limit value (ELV). The next part of the selector
shows the number of holes that can be drilled
with that tool before reaching the exposure action
value or the exposure limit value (in brackets), depending
on the diameter of the hole. The section
marked in grey is the recommended diameter range
for the different tools. Please note that the number
of 4–8 mm dia. holes given applies to a depth of
50 mm, while for diameters bigger than 8 mm hole
depth is 100 mm. This makes it easier to compare
the different tools.
Example: With a TE2-A, you can drill 120 holes
8 mm in diameter and to a depth of 50mm before
reaching the exposure action value, while with
a TE7-A you can drill 237 holes of the same size
before reaching the EAV.
Hilti – your preferred partner for productivity and safety on the jobsite
www.hilti.com 2