Tool selector. Choose the right Hilti tool.

Tool selector 08/2011
Tool selector.
Choose the right Hilti tool.
Rotary hammers, combihammers and breakers
Category
Cordless rotary hammers
Rotary hammers
Combihammers
Tool
Dust
removal
available
Basic tool data
Triaxial
vibration
value*
Emission
sound
pressure
level*
Uncertainty
K
Time
to EAV
Time
to ELV
TE2-A DRS-S 86 dB(A) 14.5 m/s 2 1.5 m/s² 14 min. 57 min. 129 119 47 36
(516) (476) (188) (144)
TE4-A22 no 88 dB(A) 11 m/s 2 1.5 m/s² 25 min. 100 min. 198 230 118 125 88 67
(792) (920) (472) (500) (352) (268)
TE6-A DRS-S 90 dB(A) 11 m/s 2 1.5 m/s² 25 min. 99 min. 251 219 94 75 61 45
(1004) (876) (376) (300) (244) (180)
TE6- DRS- 88 dB(A) 9 m/s 2 1.5 m/s² 37 min. 148 min. 318 366 162 185 139 90
A36-AVR TE6-A
(1272) (1464) (648) (740) (556) (360)
TE7-A DRS-M 88 dB(A) 11 m/s 2 1.5 m/s² 25 min. 99 min. 228 237 126 112 85 69
(912) (948) (504) (448) (340) (276)
TE1 (02) DRS-S 89 dB(A) 15 m/s 2 1.5 m/s² 13 min. 52 min. 133 56 41
(532) (224) (164)
TE2 DRS-S 89 dB(A) 16 m/s 2 1.5 m/s² 12 min. 47 min. 116 49 39
(all types)
(464) (196) (156)
TE2 (02) DRS-S 91 dB(A) 13.5 m/s 2 1.5 m/s² 16 min. 66 min. 171 163 73 61
(all types)
(684) (652) (292) (244)
TE6-S DRS-M 87 dB(A) 11 m/s 2 1.5 m/s² 25 min. 99 min. 247 111 79 73 56
(988) (444) (316) (292)(224)
TE7-C DRS-M 89 dB(A) 17 m/s 2 1.5 m/s² 10 min. 42 min. 103 107 52 45 34 28
(412) (428) (208) (180) (136)(112)
TE16 DRS-S 89 dB(A) 16.5 m/s 2 1.5 m/s² 11 min. 44 min. 123 63 60 40
(all types)
(492) (252) (240) (160)
TE30 DRS-S 90 dB(A) 16.5 m/s 2 1.5 m/s² 11 min. 44 min. 60 81 41
(240) (244) (164)
TE30-C- DRS-S 90 dB(A) 12 m/s 2 1.5 m/s² 21 min. 84 min. 114 116 78
AVR
(456) (464) (312)
TE30-M- DRS-S 90 dB(A) 12 m/s 2 1.5 m/s² 21 min. 84 min. 114 116 78
AVR
(456) (464) (312)
TE40 DRS-S 93 dB(A) 16.3 m/s 2 1.5 m/s² 11 min. 45 min. 52
(208)
TE40- DRS-S 94 dB(A) 10.7 m/s 2 1.5 m/s² 26 min. 105 min. 121
AVR
(484)
TE50 DRS-S 95 dB(A) 16.1 m/s 2 1.5 m/s² 12 min. 46 min. 50
(200)
TE50- DRS-S 93 dB(A) 11.4 m/s 2 1.5 m/s² 23 min. 92 min. 99
AVR
(396)
TE56 DRS-S 92 dB(A) 17 m/s 2 1.5 m/s² 10 min. 42 min. 47
(188)
TE56-
ATC
DRS-S 92 dB(A) 16 m/s 2 1.5 m/s² 12 min. 47 min. 33
(132)
TE60 (3) DRS-BK 96 dB(A) 18.5 m/s 2 1.5 m/s² 9 min. 36 min. 26
(104)
TE60 DRS-S 96 dB(A) 18.5 m/s 2 1.5 m/s² 9 min. 35 min. 25
(100)
TE60-T-
ATC
Productivity data
Numbers of holes to EAV 2.5 m/s 2 (ELV 5 m/s 2 ) for drilling diameter [mm]…
Hole depth 50 mm
Hole depth 100 mm
4 5 6 8 10 12 14 16 18 20 22 24 25 26 28 30 32 34 36 38 40
18
(72)
35
(140)
14
(56)
19
(76)
19
(76)
36
(144)
36
(144)
29
(116)
67
(268)
29
(116)
57
(228)
29
(116)
DRS-S 99 dB(A) 9 m/s 2 1.5 m/s² 37 min. 148 min. 113
(452)
TE70 DRS-B 99 dB(A) 22 m/s 2 1.5 m/s² 6 min. 25 min. 25
(100)
TE70- DRS-B 99.5 B(A) 22 m/s 2 1.5 m/s² 6 min. 25 min. 25
(100)
20
(80)
46
(184)
22
(88)
20
(80)
44 40
(176) (160)
TE76 DRS-B 91 dB(A) 17 m/s 2 1.5 m/s² 10 min. 42 min. 29
(116)
TE 76P- DRS-B 91 dB(A) 15 m/s 2 1.5 m/s² 13 min. 53 min. 37
ATC
(148)
TE80 DRS-B 99.5 B(A) 8.8 m/s 2 1.5 m/s² 39 min. 155 min. 171 144
(684) (576)
22
(88)
25
(100)
18
(72)
82
(328)
21
(84)
21
(84)
17
(68)
20
(80)
18
(72)
18
(72)
21
(84)
26
(104)
12
(48)
24
(96)
13
(52)
14
(56)
12
(48)
56
(224)
15
(60)
15
(60)
17
(68)
22
(88)
131 109 93
(524) (436) (372)
70
(280)
10 7
(40) (28)
10 7
(40) (28)
13
(52)
16
(64)
53
(212)
*Emission sound pressure level LpA and triaxial vibration value ahv according to the relevant European Standard EN 60745-2-x. Uncertainty (k): noise 3 dB, vibraion 1.5 m/s 2 .
Hilti – your preferred partner for productivity and safety on the jobsite
www.hilti.com 1

Tool selector 08/2011
Category Tool Dust
removal
available
Basic tool data
Emission Triaxial
sound vibration
pressure value*
level*
Uncertainty
K
Time
to EAV
Time
to ELV
Productivity data
Application Volume till EAV Volume till ELV
Breakers TE 106 DRS-B 90 dB(A) 14 m/s 2 1.5 m/s² 15 min. 61 min. chiseling to the wall 4.1 l 16 l
TE 300-AVR DRS-B 91 dB(A) 13.5 m/s 2 1.5 m/s² 16 min. 64 min. chiseling to the wall 5.0 l 20 l
TE 500 DRS-B 94 dB(A) 12.1 m/s 2 1.5 m/s² 20 min. 82 min. chiseling to the wall 22.1 l 88 l
TE 500-AVR DRS-B 94 dB(A) 10.1 m/s 2 1.5 m/s² 29 min. 118 min. chiseling to the wall 31.8 l 127 l
TE 700-AVR DRS-B 86.0 dB(A) 6.5 m/s² 1.5 m/s² 71 min. 284 min. chiselling to the wall 60.0 l 240 l
TE 706 DRS-B 90 dB(A) 9 m/s 2 1.5 m/s² 37 min. 148 min. chiseling to the wall 41.5 l 165 l
TE 706-AVR DRS-B 87 dB(A) 5.5 m/s 2 1.5 m/s² 99 min. 397 min. chiseling to the wall 111.1 l 444 l
TE 805 DRS-B 90 dB(A) 15 m/s 2 1.5 m/s² 13 min. 53 min. demolition on floor edge 44.4 l 177 l
TE 905-AVR DRS-B 92 dB(A) 8.5 m/s 2 1.5 m/s² 42 min. 166 min. demolition on floor edge 139.8 l 559 l
TE 1000-AVR DRS-B 87 dB(A) 6.5 m/s 2 1.5 m/s² 71 min. 284 min. demolition on floor edge 325.0 l 1300 l
TE 1500-AVR DRS-B 89 dB(A) 12 m/s 2 1.5 m/s² 21 min. 84 min. demolition on floor edge 145.0 l 580 l
TE 3000-AVR no 94 dB(A) 7.0 m/s² 1.5 m/s² 61 min. 244 min. demolition of floor edge 2075 l 8300 l
Combihammer
TE 30-C-AVR no 90 dB(A) 11 m/s2 1.5 m/s² 25 min. 100 min. chiseling to the wall 7.0 l 28 l
TE 30-M-AVR no 90 dB(A) 11 m/s2 1.5 m/s² 25 min. 100 min. chiseling to the wall 7.0 l 28 l
TE 56 DRS-B 92 dB(A) 13 m/s2 1.5 m/s² 18 min. 71 min. chiseling to the wall 14.9 l 59 l
TE 60 DRS-B 96 dB(A) 14 m/s2 1.5 m/s² 15 min. 61 min. chiseling to the wall 12.9 l 51 l
TE 60-ATC DRS-B 99 dB(A) 8.5 m/s2 1.5 m/s² 42 min. 166 min. chiseling to the wall 34.0 l 136 l
TE 70 DRS-B 99 dB(A) 18 m/s2 1.5 m/s² 9 min. 37 min. chiseling to the wall 11.9 l 47 l
TE 76 DRS-B 91 dB(A) 15 m/s2 1.5 m/s² 13 min. 53 min. chiseling to the wall 14.7 l 58 l
TE 80 DRS-B 99.5 dB(A) 8.5 m/s2 1.5 m/s² 42 min. 166 min. chiseling to the wall 56.5 l 225 l
Examples for volume of liter (chiseling to the wall)
Volume in liter Depth in cm Length in cm breadth in cm
1 10 x 5 x 20
2 20 x 10 x 10
5 20 x 5 x 50
10 10 x 5 x 200
20 20 x 10 x 100
50 20 x 20 x 125
100 10 x 50 x 200
500 20 x 50 x 500
How to read the selector.
In this example we compare the TE2-A and TE7-A
cordless rotary hammers.
A dust removal solution (DRS-M) is available for the
TE7-A. The sound pressure level of these tools
is shown in the next column. The next two columns
show the triaxial vibration value required for a risk
analysis and the time the tool can be operated before
reaching the exposure action value (EAV) and the
exposure limit value (ELV). The next part of the selector
shows the number of holes that can be drilled
with that tool before reaching the exposure action
value or the exposure limit value (in brackets), depending
on the diameter of the hole. The section
marked in grey is the recommended diameter range
for the different tools. Please note that the number
of 4–8 mm dia. holes given applies to a depth of
50 mm, while for diameters bigger than 8 mm hole
depth is 100 mm. This makes it easier to compare
the different tools.
Example: With a TE2-A, you can drill 120 holes
8 mm in diameter and to a depth of 50mm before
reaching the exposure action value, while with
a TE7-A you can drill 237 holes of the same size
before reaching the EAV.
Hilti – your preferred partner for productivity and safety on the jobsite
www.hilti.com 2

Tool selector 08/2011
Impact drilling
Category Tool Dust
removal
available
Cordless
drills/
drivers
Universal
hammers
Basic tool data
Emission Triaxial
sound vibration
pressure value*
level* LpA*
Uncertainty
K
Time
to EAV
Time
to ELV
SFH 22-A no 96 dB(A) 20 m/s 2 1.5 m/s² 8 min. 32 min. screed concrete
limestone/masonry
SFH 144-A no 91 dB(A) 12 m/s 2 1.5 m/s² 21 min. 84 min. screed concrete
limestone/masonry
SFH 151-A no 93 dB(A) 11.8 m/s 2 1.5 m/s² 22 min. 88 min. screed concrete
limestone/masonry
SFH 181-A no 91 dB(A) 13.1 m/s 2 1.5 m/s² 17 min. 68 min. screed concrete
limestone/masonry
UH 240-A no 93 dB(A) 13.9 m/s 2 1.5 m/s² 16 min. 64 min. screed concrete
limestone/masonry
UH 650 no 96 dB(A) 14 m/s 2 1.5 m/s² 15 min. 60 min. screed concrete
limestone/masonry
Productivity data
Work piece Number of holes to EAV 2.5 m/s 2
Hole depth: 50mm 80 mm
Drilling Ø: 8 mm 10 mm
300 (1200)
360 (1440)
330 (1320)
270 (1080)
250 (1000)
330 (1320)
260 (1040)
500 (2000)
210 (840)
370 (1480)
260 (1040)
280 (1120)
150 (600)
140 (560)
140 (560)
110 (440)
140 (560)
135 (540)
140 (560)
180 (720)
150 (600)
170 (680)
140 (560)
115 (460)
90 mm
12 mm
95 (380)
80 (320)
110 (440)
55 (220)
70 (280)
70 (280)
90 (360)
90 (360)
120 (480)
85 (340)
70 (280)
45 (180)
*Emission sound pressure level LpA and triaxial vibration value ahv according to the relevant European Standard EN 60745-2-x. Uncertainty (k): noise 3 dB, vibraion 1.5 m/s 2 .
Impact fastening
Category Tool Dust
removal
system
Impact
drivers/
wrenches
Screwdrivers
Basic tool data
Emission
sound
pressure
level* LpA*
Triaxial
vibration
value*
Uncertainty
K
Time
to EAV
Time
to ELV
Productivity data
Work piece Screw type Number of screw
settings to EAV
2.5 m/s 2 (ELV 5 m/s 2 )
SI 100 no 95 dB(A) 8.4 m/s² 1.5 m/s² 43 min. 172 min. concrete HUS H 12.5 (10 mm) 635 (2540)
SID/SIW no 83 dB(A) 7.5 m/s² 1.5 m/s² 53 min. 212 min. steel M12 metal screw 1600 (6400)
14-A
83 dB(A) 7.5 m/s² 1.5 m/s² 53 min. 212 min. concrete HUS H 6 screw (6 mm) 800 (3200)
SID/SIW no 86 dB(A) 11.0 m/s² 1.5 m/s² 25 min. 100 min. steel M12 metal screw 740 (2960)
22-A
86 dB(A) 11.0 m/s² 1.5 m/s² 25 min. 100 min. concrete HUS H 7,5 screw (6 mm) 370 (1480)
SID/SIW no 85 dB(A) 7.4 m/s 2 1.5 m/s² 55 min. 220 min. steel M12 metal
1600 (6400)
121-A
625 (2500)
SID/SIW no 93 dB(A) 12 m/s 2 1.5 m/s² 21 min. 84 min. steel
M12 metal
300 (1200)
144-A
steel
HUS H 7.5 (6 mm) 420 (1600)
SIW 22T-A no 97 dB(A) 14.5 m/s 2 1.5 m/s² 14 min. 56 min. steel
M20 metal
170 (680)
concrete
HUS H 10.5 (8 mm)
110 (440)
concrete
HUS H 12.5 (10 mm)
70 (280)
concrete
HUS H 16.5 (14 mm)
22 (88)
wood
12 X wood (240 mm)
TKI 2500 no 97 dB(A) 12.3 m/s 2 1.5 m/s² 20 min. 80 min. screed concrete M10 metal 120 (480)
12.3 m/s 2 1.5 m/s² 20 min. 80 min. limestone/masonry HUS H 7.5 (6 mm) 85 (340)
ST 1800-A22 no 70 dB(A) 0.5 m/s² 1.5 m/s² 12000 min. 48000 min. steel S-MD 01Z 4,8x19 3000 (1200)
steel S-MD 51Z 4,8x19 5200 (20800)
steel S-MD 03Z 5,5x25 1500 (6000)
steel S-MD 53Z 5,5x25 2700 (10800)
steel S-MD 05Z 5,5x40 540 (2160)
steel S-MD 55Z 5,5x45 800 (3200)
*Emission sound pressure level LpA and triaxial vibration value ahv according to the relevant European Standard EN 60745-2-x. Uncertainty (k): noise 3 dB, vibraion 1.5 m/s 2 .
Diamond coring tools
Hand-held diamond core drilling with water in non reinterced concrete
Basic tool data
Productivity data
Tool Dust Emission Triaxial Uncertainty
Time Time Core bit
Number of holes till EAV 2.5 m/s 2 (ELV 5 m/s 2 )
removal
available
sound
pressure
K
vibration
value*
to EAV to ELV length
or type
for coring diameter [mm]
Hole depth 100 mm
level* LpA*
8 12 16 18 20 24 28 35 52 66
DD EC 1 wet 87 dB(A) 10 m/s² 1.5 m/s² 30 min. 120 min. 150 mm 120
(480)
110
(440)
100
(400)
17 m/s² 2.0 m/s² 10 min. 40 min. 300 mm 47
(188)
28
(112)
DD 130 wet 89 dB(A) 5 m/s² 1.5 m/s² 120 min. 480 min. HWC 90
(360)
40
(160)
DD 110-W wet 84 dB(A) 4.6 m/s² 1.5 m/s² 142 min. 568 min. HWC 200
(800)
80
(320)
DD 150 U wet 87 dB(A) 7 m/s² 1.5 m/s² 61 min. 244 min. HWC 30
(120)
min./max. Diameter range (recommendation)
*Emission sound pressure level LpA and triaxial vibration value ahv according to the relevant European Standard EN 60745-2-x. Uncertainty (k): noise 3 dB, vibraion 1.5 m/s 2 .
Hilti – your preferred partner for productivity and safety on the jobsite
www.hilti.com 3

Tool selector 08/2011
Diamond coring tools
Hand-held dry diamond socket cutting into sand-limestone
Basic tool data
Productivity data
Tool Dust Emission Triaxial Uncertainty
Time Time Core bit
Number of holes till EAV 2.5 m/s 2 (ELV 5 m/s 2 )
removal
available
Sound
pressure
K
vibration
value*
to EAV to ELV type
for coring diameter [mm]
Hole depth 60 mm
level LpA*
68 82
DD 110-D dry, vacuum 84 dB(A) 5.8 m/s² 1.5 m/s² 89 min. 356 min. SC HDMU 320
(1280)
12 m/s² 1.5 m/s² 21 min. 84 min. SC PCM 130
(520)
DD 130 dry, vacuum 89 dB(A) 6 m/s² 1.5 m/s² 83 min. 332 min. SC HDMU 280
(1120)
11 m/s² 2.5 m/s² 25 min. 100 min. SC PCM 190
(760)
*Emission sound pressure level LpA and triaxial vibration value ahv according to the relevant European Standard EN 60745-2-x. Uncertainty (k): noise 3 dB, vibraion 1.5 m/s 2 .
Hand-held dry diamond core drilling into sand-limestone
Basic tool data
Productivity data
Tool Dust Emission Triaxial Uncertainty
Time Time Core bit
Number of holes till EAV 2.5 m/s 2 (ELV 5 m/s 2 )
removal
available
Sound
pressure
K
vibration
value*
to EAV to ELV length
or type
for coring diameter [mm]
Hole depth 100 mm
level LpA*
16 18 20 24 28 35 52 67 68 87 102 112 122 132 152 162
DD 110-D dry,
vacuum
84 dB(A) 5.8 m/s² 1.5 m/s² 89 min. 356 min. SC HDMU 230
(920)
200
(800)
90
(360)
20
(80)
DD 130 dry 89 dB(A) 6 m/s² 1.5 m/s² 83 min. 332 min. SC HDMU 370 170 100 30
vacuum (1480) (680) (400) (120)
DD 150 U dry,
vacuum
87 dB(A) 6.5 m/s² 1.6 m/s² 71 min. 284 min. DD-B
HDMU
150
(600)
14.5 m/s² 4.5 m/s² 14 min. 56 min. DD-B PCM 110
(440)
*Emission sound pressure level LpA and triaxial vibration value ahv according to the relevant European Standard EN 60745-2-x. Uncertainty (k): noise 3 dB, vibraion 1.5 m/s 2 .
Rig based diamond core drilling with water in non reinforced concrete (I)
Tool
DD EC1-
Rig
Basic tool data
Productivity data
Dust Emission Triaxial Uncertainty
Time Time Core bit
Number of holes till EAV 2.5 m/s 2 (ELV 5 m/s 2 )
removal Sound K vibration
to EAV to ELV length
for coring diameter [mm]
available pressure value*
or type
Hole depth 100 mm
level LpA*
8 12 16 18 20 24 28 35
wet 84 dB(A) 7 m/s² 1.5 m/s² 61 min. 244 min. ≤ 150 mm 110
(440)
11 m/s² 1.5 m/s² 25 min. 100 min. SC HDMU 65
(260)
*Emission sound pressure level LpA and triaxial vibration value ahv according to the relevant European Standard EN 60745-2-x. Uncertainty (k): noise 3 dB, vibraion 1.5 m/s 2 .
Rig based diamond core drilling with water in non reinforced concrete (I)
Basic tool data
Productivity data
Tool Dust Emission Triaxial Uncertainty
Time Time Core bit
Number of holes till EAV 2.5 m/s 2 (ELV 5 m/s 2 )
removal
available
Sound
pressure
K
vibration
value*
to EAV to ELV length
or type
for coring diameter [mm]
Hole depth 100 mm
level LpA*
35 52 67 68 82 87 102 112 122 132 152 162 202
DD 120-
Rig
wet 89 dB(A) 2.5 m/s² n.a 480 min. 1920 min. DD BI…P2 170
(680)
130
(520)
60
(240)
40
(160)
DD 130-
Rig
wet 89 dB(A) 3.5 m/s² n.a 245 min. 980 min. DD BI…P2 290
(1160)
80
(320)
70
(280)
30
(120)
DD 150-
U Rig
wet 93 dB(A) 3.5 m/s² 1.5 m/s² 245 min. 980 min. DD-Bl P130 95**
(380)
DD 160 wet 93 dB(A) 4 m/s² 1.5 m/s² 188 min. 752 min. DD-Bl P2 90**
(360)
DD 200-
Rig
wet 92 dB(A) 2.5 m/s² n.a 480 min. 1920 min. DD BL…H2 390
(1560)
90**
(360)
DD 350-
Rig
DD 500-
Rig
wet 95 dB(A) 2.5 m/s² n.a 480 min. 1920 min. DD BL…H2 1100
(4400)
wet 89 dB(A) 2.5 m/s² n.a 480 min. 1920 min. DD BL…
HX2
min./max. Diameter range (recommendation)
* Emission sound pressure level LpA and triaxial vibration value ahv according to the relevant European Standard EN 60745-2-x. Uncertainty (k): noise 3 dB, vibraion 1.5 m/s 2 .
** Hole depth 200 mm
700
(2800)
290**
(1160)
300**
(1200)
Hilti – your preferred partner for productivity and safety on the jobsite
www.hilti.com 4

Tool selector 08/2011
Diamond cutting tools
Cutting
Category Tool Dust
removal
available
Diamond
cutters
DCH
230 (01)
DCH
300 (01)
Basic tool data
Emission
sound
pressure
level*
Triaxial
vibration
value ahv*
Uncertainty
K
Time
to EAV
Time
to ELV
Productivity data
Cutting wheel Application Exposure
Action
Value
Integrated 102.5 dB(A) 4.7 m/s 2 1.5 m/s² 136 min. 544 min. DC-D230-C1 cutting off 50 mm
concrete slabs
DC-D230-C1 cutting grooves 45 mm deep
in 40 N/mm 2 concrete
DC-D230-M1/ C1 cutting grooves 50 mm deep
in limestone
Integrated 106 dB(A) 5.1 m/s 2 1.5 m/s² 115 min. 460 min. DCH-D305-C1 cutting off 50 mm
concrete slabs
DCH-D305-C1 cutting grooves 45 mm deep
in 40 N/mm 2 concrete
DCH-D305-M1/
C1
DCH-D305-M1/
C1
cutting grooves 45 mm deep
in limestone
cutting grooves 90 mm deep
in limestone
Exposure
Limit
Value
70 m 280 m
58 m 232 m
109 m 436 m
60.5 m 244 m
48 m 192 m
32 m 128 m
26 m 104 m
*Emission sound pressure level LpA and triaxial vibration value ahv according to EN 60745-2-x (Uncertainty (k): noise 3 dB(A), vibration 1,5 ….2,7 m/s² , depending on tool and application).
Cutting
Category Tool Dust
removal
available
Diamond
cutters
DCH
180 SL
DC-SE
20
Basic tool data
Emission
sound
pressure
level*
Triaxial
vibration
value ahv*
Uncertainty
K
Time
to EAV
Time
to ELV
Productivity data
Cutting wheel Application Exposure
Action
Value
Integrated 103.5 dB(A) 5.6 m/s 2 1.7 m/s² 96 min. 384 min. DCH-D185-SE C1 wall chasing 45 mm deep
in 40 N/mm 2 concrete
DCH-D185-SE M1/ C1 wall chasing 45 mm deep
in sand-limestone
Integrated 104 dB(A) 4.5 m/s 2 n.a 148 min. 592 min. DC-D125-SE C1 wall chasing 30 mm deep
in 40 N/mm 2 concrete
DC-D125-SE M1/ C1 wall chasing 30 mm deep
in sand-limestone
Exposure
Limit
Value
32 m 128 m
78.5 m 314 m
25.5 m 101 m
86 m 344 m
*Emission sound pressure level LpA and triaxial vibration value ahv according to EN 60745-2-x (Uncertainty (k): noise 3 dB(A), vibration 1,5 ….2,7 m/s² , depending on tool and application).
Hilti – your preferred partner for productivity and safety on the jobsite
www.hilti.com 5

Tool selector 08/2011
Diamond cutting tools
Category Tool Emission
sound
pressure
level LpA*
Grinding
steel
Basic tool data
Triaxial
vibration
value ahv*
Uncertainty
K
Time
to EAV
Time
to ELV
Cutting wheel
Action
Value
Productivity data
Application
Limit
Value
AG 125-S 88 dB(A) 5,2 m/s² n.a 111 min. 444 min. AG-D 125 USP 6,4 grinding 5⨯5 mm chamfer
(12.5 mm² on mild steel)
DAG 125-S 87 dB(A) 4.6 m/s² n.a 142 min. 568 min. AG-D 125 USP 6,4 grinding 5⨯5 mm chamfer
(12.5 mm² on mild steel)
DEG 125-D 89 dB(A) 7 m/s² n.a 61 min. 244 min. AG-D 125 USP 6,4 grinding 5⨯5 mm chamfer
(12.5 mm² on mild steel)
DCG 125-S 90 dB(A) 5,7 m/s² n.a 92 min. 368 min. AG-D 125 USP 6,4 grinding 5⨯5 mm chamfer
(12.5 mm² on mild steel)
DC 230-S 92 dB(A) 5,8 m/s² n.a 89 min. 356 min. AG-D 125 USP 6,4 grinding 5⨯5 mm chamfer
(12.5 mm² on mild steel)
DAG 230-D 90 dB(A) 5 m/s² n.a 120 min. 480 min. AG-D 125 USP 6,4 grinding 5⨯5 mm chamfer
(12.5 mm² on mild steel)
Cutting DAG 230-D 90 dB(A) 5 m/s² n.a 120 min. 480 min. DC-D 230-C1 cutting off 50 mm
concrete slabs
DC-D 230-C1 cutting grooves 30 mm deep
in 40 N/mm 2 concrete
DC-D 230-C1 cutting grooves 45 mm deep
in limestone
DCG 230-D 90 dB(A) 5 m/s² n.a 120 min. 480 min. DC-D 230-C1 cutting off 50 mm
concrete slabs
DC-D 230-C1 cutting grooves 30 mm deep
in 40 N/mm 2 concrete
DC-D 230-C1 cutting grooves 45 mm deep
in limestone
DCG 230-DB 90 dB(A) 5 m/s² n.a 120 min. 480 min. DC-D 230-C1 cutting off 50 mm
concrete slabs
DC-D 230-C1 cutting grooves 30 mm deep
in 40 N/mm 2 concrete
DC-D 230-C1 cutting grooves 45 mm deep
in limestone
Exposure
Action
Value
Exposure
Limit
Value
21 m 84 m
28 m 112 m
46 m 184 m
50 m 200 m
11 m 44 m
61 m 244 m
61 m 244 m
54 m 216 m
71 m 284 m
79 m 316 m
60 m 240 m
117 m 468 m
70 m 280 m
80 m 320 m
108 m 432 m
*Emission sound pressure level LpA and triaxial vibration value ahv according to the relevant European Standard EN 60745-2-x. Uncertainty (k): noise 3 dB, vibraion 1.5 m/s 2 .
Hilti – your preferred partner for productivity and safety on the jobsite
www.hilti.com 6

Tool selector 08/2011
Steel cutting tools
Cutting rebar
Tool
Dust
removal
available
Basic tool data
Triaxial
vibration
value*
Emission
Sound
pressure
level LpA*
Uncertainty
Time
K to
EAV
Time
to ELV
Cutting
wheel
DC 230 S DC-EX 92 dB(A) 5.8 m/s² n.a 89 min. 356 min. AC-D 230
2.5 mm USP
2770
(11080)
Productivity data
Number of cuts for diameter [mm]
10 12 15 20 25 30 40
1860 115 610 380 250 130
(7440) (4200) (2440) (1520) (1000) (520)
*Emission sound pressure level LpA and triaxial vibration value ahv according to the relevant European Standard EN 60745-2-x. Uncertainty (k): noise 3 dB, vibraion 1.5 m/s 2 .
Cutting channel installation system
Tool
Dust
removal
available
Basic tool data
Triaxial
vibration
value*
Emission
Sound
pressure
level LpA*
Uncertainty
K
Time
to EAV
Time
to ELV
Cutting
wheel
DC 230 S DC-EX 92 dB(A) 5.8 m/s² n.a 89 min. 356 min. AC-D 230
2.5 mm USP
Productivity data
Number of cuts for channel...
MQ 21/2 MQ 41/2 MQ 41/3
2770
1860
115
(11080)
(7440)
(4200)
*Emission sound pressure level LpA and triaxial vibration value ahv according to the relevant European Standard EN 60745-2-x. Uncertainty (k): noise 3 dB, vibraion 1.5 m/s 2 .
Cutting steel bars
Tool
Dust
removal
available
Basic tool data
Triaxial
vibration
value*
Emission
Sound
pressure
level LpA*
Uncertainty
Time
K to
EAV
Time
to ELV
Cutting
wheel
DC 230 S DC-EX 92 dB(A) 5.8 m/s² n.a 89 min. 356 min. AC-D 230
2.5 mm USP
Productivity data
Flat steel
Square steel
Number of cuts for dimensions [mm]…
10⨯50 20⨯60 30⨯60 30⨯80 13 20 25 30 40
370 140 90 65 1200 470 290 190 100
(1480) (560) (360) (260) (4800) (1880) (1160) (760) (400)
*Emission sound pressure level LpA and triaxial vibration value ahv according to the relevant European Standard EN 60745-2-x. Uncertainty (k): noise 3 dB, vibraion 1.5 m/s 2 .
Cutting steel pipes
Tool
Dust
removal
available
Basic tool data
Triaxial
vibration
value*
Emission
Sound
pressure
level LpA*
Uncertainty
Time
K to
EAV
Time
to ELV
DC 230 S DC-EX 92 dB(A) 5.8 m/s² n.a 89 min. 356 min. AC-D 230 2.5 mm USP 1640
(6560)
Productivity data
Cutting
wheel Number of cuts for diameter [mm] ...
26.9 (1.6) 33.7 (2) 42.4 (2) 48.3 (2) 60.3 (2) 76.1 (2)
1010 770 670 520 400
(4040) (3080) (2680) (2080) (1600)
*Emission sound pressure level LpA and triaxial vibration value ahv according to the relevant European Standard EN 60745-2-x. Uncertainty (k): noise 3 dB, vibraion 1.5 m/s 2 .
Hilti – your preferred partner for productivity and safety on the jobsite
www.hilti.com 7

Tool selector 08/2011
Direct fastening tools
ELV
DX tool Vibration Noise
Cartridge color Allowed number of fastenings per day Workplace relevant emission value LpA,1s
EAV
2.5 m/s 2 5 m/s 2
GX120/GX120 ME — 3500 14000 102 dB(A)
GX100/GX100-E — 2700 10800 102 dB(A)
DX351 White 2100 8400
Green 1900 7600
Yellow 1100 4400
104 dB(A)
Red 800 3200
DX460 Green 1300 5200
Yellow 1000 4000
Red 1000 4000
103 dB(A)
Black 600 2400
DX76 Blue 700 2800
Red 600 2400
110 dB(A)
Black 400 1600
*Sound pressure level LpA, 1s measured at user’s ear according to standard EN 12549. Wear ear plugs according to operating instructions.
ELV
DX tool Vibration Noise
Cartridge color Allowed number of fastenings per day Workplace relevant emission value LpA,1s
EAV
2.5 m/s 2 5 m/s 2
DX860 ENP Blue 3500 14000
Red 2600 10400
106 dB(A)
Black 1800 7200
DX860 HSN Yellow 5600 22400
Red 5500 22000
Black 3000 12000
DXE72 Brown 1000 4000
Green 900 3600
103 dB(A)
Yellow 700 2800
DX36 Green 600 2400
Yellow 500 2000
Red 500 2000
*Sound pressure level LpA, 1s measured at user’s ear according to standard EN 12549. Wear ear plugs according to operating instructions.
ELV
DX tool Vibration Noise
Cartridge color Allowed number of fastenings per day Workplace relevant emission value LpA,1s
EAV
2.5 m/s 2 5 m/s 2
DXA41 Green 1300 5200
Yellow 1000 4000
Red 1000 4000
103 dB(A)
Black 600 2400
DX750 Blue 600 2400
Red 500 2000
110 dB(A)
Black 400 1600
*Sound pressure level LpA, 1s measured at user’s ear according to standard EN 12549. Wear ear plugs according to operating instructions.
Hilti – your preferred partner for productivity and safety on the jobsite
www.hilti.com 8

Tool selector 08/2011
Reciprocating saws
Category Tool Dust
removal
system
Reciprocating
saws
Basic tool data
Emission
sound
pressure
level LpA*
Triaxial
vibration
value ahv*
Uncertainty
K
Time
till EAV
Time
till ELV
Saw
blade
Application
Productivity data
Exposure
Action
Value
WSR 22-A n/a 82 16.0 m/s² 1.5 m/s² 12 min. 48 min. WU 20 Cutting off 38 mm chipboard 18.5 m 74 m
WSR 22-A n/a 82 18.0 m/s² 1.5 m/s² 9 min. 36 min. WF 23 Cutting off (100 × 100) mm wooden beam 4 m 16 m
Exposure
Limit
Value
WSR 36-A no 90 dB(A) 13 m/s² 3.0 m/s² 18 min. 72 min. WU 20 Cutting chipboard (thickness 38 mm) 46.5 m 186 m
16 m/s² 5.0 m/s² 12 min. 48 min. WF 23 Cutting wooden beams (100 x 100 mm fir) 61 cuts 244 cuts
WSR 650-A no 84 dB(A) 12 m/s² 2.5 m/s² 21 min. 84 min. WU 20 Cutting chipboard (thickness 38 mm) 61 m 244 m
16 m/s² 5.0 m/s² 12 min. 48 min. WF 23 Cutting wooden beams (100 x 100 mm fir) 97 cuts 388 cuts
WSR 900-PE no 89 dB(A) 16 m/s² 2.5 m/s² 12 min. 48 min. WU 20 Cutting chipboard (thickness 38 mm) 47.9 m 191 m
23 m/s² 3.5 m/s² 6 min. 24 min. WF 23 Cutting wooden beams (100 x 100 mm fir) 39 cuts 156 cuts
WSR 1250-PE no 90 dB(A) 22 m/s² 2.5 m/s² 6 min. 24 min. WU 20 Cutting chipboard (thickness 38 mm) 27.9 m 111 m
26.5 m/s² 3.5 m/s² 4 min. 16. min WF 23 Cutting wooden beams (100 x 100 mm fir) 43 cuts 172 cuts
WSR 1400-PE no 91 dB(A) 20 m/s² 2.5 m/s² 8 min. 32 min. WU 20 Cutting chipboard (thickness 38 mm) 34.5 m 138 m
28 m/s² 3.5 m/s² 4 min. 16 min. WF 23 Cutting wooden beams (100 x 100 mm fir) 35 cuts 140 cuts
* Emission sound pressure level LpA and triaxial vibration value ahv according to the relevant European Standard EN 60745-2-x.
Uncertainty (k): noise 3dB, vibration 1.5….5 m/s², depending on tool and application.
Jig saws
Category Tool Dust
removal
system
Basic tool data
Emission
sound
pressure
level LpA*
Triaxial
vibration
value ahv*
Uncertainty
K
Time till
EAV
Time till
ELV
Saw
blade
Productivity data
Application
Exposure
Action
Value
Jig saws WSJ 750 EB WSJ-DRS 88 dB(A) 13 m/s² 1.5 m/s² 18 min. 72 min. W91/P HCS Cutting chipboard (thickness 38 mm) 50 m 200 m
5 m/s² 1.5 m/s² 120 min. 480 min. M50/2 BIM Cutting sheet metal (thickness 3 mm) 23 m 92 m
WSJ 750 ET WSJ-DRS 87 dB(A) 10.5 m/s² 1.5 m/s² 27 min. 108 min. W91/P HCS Cutting chipboard (thickness 38 mm) 70 m 280 m
4 m/s² 1.5 m/s² 188 min. 752 min. M50/2 BIM Cutting sheet metal (thickness 3 mm) 26 m 104 m
WSJ 850 EB WSJ-DRS 88 dB(A) 11 m/s² 1.5 m/s² 25 min. 100 min. W91/P HCS Cutting chipboard (thickness 38 mm) 75 m 300 m
5 m/s² 1.5 m/s² 120 min. 480 min. M50/2 BIM Cutting sheet metal (thickness 3 mm) 24 m 96 m
WSJ 850 ET WSJ-DRS 87 dB(A) 9 m/s² 1.8 m/s² 37 min. 148 min. W91/P HCS Cutting chipboard (thickness 38 mm) 110 m 440 m
4 m/s² 1.5 m/s² 188 min. 752 min. M50/2 BIM Cutting sheet metal (thickness 3 mm) 29 m 116 m
* Emission sound pressure level LpA and triaxial vibration value ahv according to the relevant European Standard EN 60745-2-x.
Uncertainty (k): noise 3dB, vibration 1.5….5 m/s², depending on tool and application.
Exposure
Limit
Value
Hilti – your preferred partner for productivity and safety on the jobsite
www.hilti.com 9

Tool selector 08/2011
Circular saws
Category Tool Dust
removal
system
Circular
saws
Basic tool data
Emission Triaxial
sound vibration
pressure value ahv*
level LpA*
Uncertainty
K
Time till
EAV
Time till
ELV
Application
Productivity data
Exposure
Action
Value
Exposure
Limit
Value
SCW 22-A VC 93 dB(A) 1.2 m/s² 1.5 m/s² 2083 min. 8332 min. Cutting off 38 mm chipboard 13500 m 54000 m
Cutting 55 mm softwood 1800 m 7200 m
WSC-55-A24 VC 95 dB(A) 2.5 m/s² 1.5 m/s² 480 min. 1920 min. Cutting off 38 mm chipboard 5200 m 20800 m
Cutting 55 mm softwood 3000 m 12000 m
WSC-55 VC 94 dB(A) 2.5 m/s² n.a 480 min. 1920 min. Cutting off 38 mm chipboard 9000 m 36000 m
Cutting 55 mm softwood 4000 m 16000 m
WSC 70-A36 VC 97 dB(A) 2.5 m/s² n.a 480 min. 1920 min. Cutting off 38 mm chipboard 7400 m 29600 m
Cutting 70 mm softwood 4800 m 19200 m
WSC 70 VC 94 dB(A) 2.5 m/s² n.a 480 min. 1920 min. Cutting off 38 mm chipboard 5000 m 20000 m
Cutting 70 mm softwood 4000 m 16000 m
WSC 85 VC 100 dB(A) 2.5 m/s² n.a 480 min. 1920 min. Cutting off 38 mm chipboard 3300 m 13200 m
Cutting 80 mm softwood 1200 m 4800 m
WSC 255 VC 92 dB(A) 2.5 m/s² n.a 480 min. 1920 min. Cutting off 38 mm chipboard 3500 m 14000 m
Cutting 55 mm softwood 3300 m 13200 m
WSC-265 KE VC 89 dB(A) 2.5 m/s² n.a 480 min. 1920 min. Cutting off 38 mm chipboard 2500 m 10000 m
Cutting 65 mm softwood 3000 m 12000 m
* Emission sound pressure level LpA and triaxial vibration value ahv according to the relevant European Standard EN 60745-2-x.
Uncertainty (k): noise 3dB, vibration 1.5….5 m/s², depending on tool and application.
How to read the selector.
In this example we show how to find the relevant
data for risk assessment (e.g. number of cuts on a
wooden beam before reaching exposure action
value and exposure limit value.) The sound pressure
level of these tools is shown in the third column.
The next column shows the triaxial vibration value
required for a risk analysis. The next part of the
selector shows the time the tool can be operated
and the number of cutting meters on chipboard
respectively the number of cuts on wooden beam
that can be performed with that tool before reaching
the exposure action value (EAV, column
5 and 6) or the exposure limit value (ELV, column 7
and 8). Please note that these values are only
valid with the appropriate saw blade used (mentioned
in last column)If you have to perform application
not mentioned in the selector, you can use
the exposure time for wooden beam application as
first approximation for the risk assessment.
Example: With WSR36-A using the WF23 saw
blade you can perform 61 cuts in wooden beam
100 ⨯ 100 mm before reaching exposure action
value and 244 cuts before reaching exposure
limit value.
Hilti – your preferred partner for productivity and safety on the jobsite
www.hilti.com 10

Tool selector 08/2011
Disclaimer
Disclaimer for power tool selector
The vibration emission levels given in this information sheet have
been measured in accordance with a standardised test described in
EN 60745-1: 2006 or EN 61029 and may be used to compare one
tool with another. They may be used for a preliminary assessment
of exposure.
The declared vibration emission levels represent the main applications
of the tools. However if the tools are used for different
applications, with different accessories or are poorly maintained, the
vibration emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration should also take
into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the operator from the
effects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
Disclaimer for direct fastening selector
The vibration and noise values listed in this table are generated
from laboratory tests and do not guarantee actual recoil values in any
specific application on site. The values are rounded averages.
These vibration and noise values are therefore to be used as a guideline
only. The employer is responsible for adhering to legal requirements
applicable to workplace health and safety and for evaluation
of the actual vibration and noise values by taking the appropriate
on-site measurements.
Underlying measurements for vibration values are one-dimensional
and taken in typical applications under laboratory conditions in
accordance with ISO 8662-11.
Underlying measurements for noise values are taken in typical
applications under laboratory conditions in accordance with EN 12
549 acoustics – noise test code for fastener driving tools.
The respective numbers shown in the selector indicate as follows:
– Rotary hammers (1):
Numbers of holes that can be drilled in one working day without
exceeding the exposure action value or exposure limit value as
defined in the EU vibration directive 2002/44/EC.
– Combi hammers (2):
Numbers of holes that can be drilled or respectively the size of opening
that can be chiselled in one working day without excee-ding
the exposure action value or exposure limit value as defined in the
EU vibration directive 2002/44/EC.
– Breakers (3):
The size of opening that can be chiselled in one working day
without exceeding the exposure action value or exposure limit
value as defined in the EU vibration directive 2002/44/EC.
– Diamond coring tools (4):
Numbers of hole that can be drilled in one working day without
exceeding the exposure action value or exposure limit value as
defined in the EU vibration directive 2002/44/EC.
– Reciprocating saws (5):
Number of cutting meters that can be cut or respectively the
number of cuts that can be performed in one working day without
exceeding the exposure action value or exposure limit value as
defined in the EU vibration directive 2002/44/EC.
The vibration values listed are triaxial measurements made in accordance
with EN 60745-1:2006 or EN 61029. The vibration values
shown are generated from laboratory test data and do not guarantee
actual vibration values for any specific application on site. The values
are rounded averages.
Noise values are measured in accordance with EN 60745-1:2006 or
EN 61029. Regardless of the noise value, Hilti strongly recommends
that appropriate noise protection is worn.
The material used for the measurements is defined as following:
– Rotary hammers, combi hammers, breakers and diamond coring
tools are measured on concrete with a minimum compressive
strength of 40 N/mm2 (after 28 days). The concrete is not reinforced.
The depth of the holes drilled is stated in the respective table.
– Reciprocating saws are measured on chipboard with the dimensions
of 600 x 38 mm and beams of fir wood with the dimensions
of 100 x 100 mm.
The size of opening chiselled by the small breakers up to and including
the TE 706 represents chiselling out an opening in a wall (e.g. for
a window) in solid material, i.e. the opening is surrounded by concrete
on all sides.
When chiselling at the edge of a slab, performance is higher by a
factor of 2–3. With the TE 805 and TE 905-AVR, the application is demolition
chiselling towards the ground on an edge.
The productivity values are calculated on the basis of the vibration
value and performance of the tool and are measured in the procedures
according to EN 60745-1:2006 or EN 61029. They vary, depending
on many factors, such as the material, possible rebar hits, type and
sharpness of the bit, chisel or blade used and the working behaviour
of the user etc. All values are measured using new Hilti power tools
and bits, chisels, blades etc.
Drilling into or through rebars influences the rate of drilling progress
and vibration emissions. This, as a rule, leads to a significant reduction
of overall productivity (decrease in the number of holes drilled).
The values given in the tool and application selectors are therefore
to be used only as a guideline. The employer is responsible for ensuring
that limit values are not exceeded.
The efficiency of dust removal systems depends strongly on their
correct use as well as the conditions on the jobsite, e.g. the type
and surface shape of the material worked on. The values given and
statements made with respect to dust removal are therefore an
indication only.
Dust from material such as paint containing lead, some wood species,
minerals and metal may be harmful. Contact with or inhalation of
the dust may cause allergic reactions and/or respiratory diseases to
the operator or bystanders.
Certain kinds of dust are classified as carcinogenic such as oak and
beech dust especially in conjunction with additives for wood conditioning
(chromate, wood preservative). Material containing asbestos
must only be treated by specialists.
• Where the use of a dust extraction device is possible it shall be used.
• The work place must be well ventilated.
• The use of a dust mask of filter class P2 is recommended.
Follow national requirements for the materials you want to work with.
Hilti – your preferred partner for productivity and safety on the jobsite
www.hilti.com 11