View - Indian Coast Guard
View - Indian Coast Guard View - Indian Coast Guard
TECHNICAL BID-COMPLIANCE STATEMENT APPENDIX ‘A’ (Refer Para 3 of Part II of RFP) Sl. No. (i) Specification reference (a) IS: 175:1989 (Variety No. V) Relevant Para No. Item Details SHEET BARRACK(BED SHEET) WHITE 240X135CMS (b) --do-- 4.2 (ii) 4.1/3.1 Fabric : Bedsheet shall be made from 48 percent polyester and 52 percent cotton blend. Fibre blend shall be intimately mixed. Sewing Thread : Cotton sewing thread of 60s/3 cotton count (100 dtex X3) conforming IS 1720:1978 shall be used. In case of dyed 4.3 sheets, the thread shall be of a similar shade. Hems : Each transverse end of sheet shall have a 2 cms hem. Minimum of o.5 cm of the raw edge shall be returned in. Side Edges : The sheets shall have selvedge on the two sides. Sewing : The sewing shall be of even tension and the loose ends shall be finished securely and neatly. The number of stitches shall not be less than 4 per cm. Dimension : The finished dimensions of bedsheet shall be 240 X 135 cms. Subject to a tolerance of (+/-) 1 cm and (+/-) 2 cm on width and length respectively. TOWEL ORDINARY WHITE (112 X 61 CMS) (c) IS 171 : 1985 4.1 Yarn : The cotton yarn used in the manufacture of towel shall conformate the requirement specified in IS 171 : 1985. Compliance to specification – whether Yes /No In case of noncompliance, deviation from specification to be specified in unambiguous terms (d) ---do--- 4.2, 4.2.2 Towel : (i) The towels shall be free from dressing and filling materials and substances liable to cause subsequent tendering. (ii) Each transverse end of the towel shall be either finished with a fringe 4 to 5 cm in length, or hemmed to a depth of not less than 15 mm, the raw edges having a turn-in of 10 mm before the hem is formed. The cotton sewing thread of 100 d tex X 6 (60/6) shall be used in hemming and the number of stitches shall not be less than 4 per centimeter. (iii) The towels when visually examined shall be reasonably free from spinning, weaving and processing defects.
LAB TEST REPORT Appendix ‘B’ (Refer to Para 23 of Part IV of RFP) Sl. No. Specification reference Name of Parameters Values Method Used Complied of values with Firms’ Lab test report Yes/No (i) SHEET BARRACK(BED SHEET) WHITE 240X135CMS 1 IS: 175-1989 (Variety No. V) (Table 1, Table 2 & Table 3) Fibre content 48% Polyster & 52% Cotton 2 ENDS/cm (min) 28 IS : 1963 : 1981 3 PICKS/cm (min 25 IS : 1963 :1981 4 MASS/g/sqrm (min) 155 IS:1964 :1970 5 Breaking Load on IS : 1969-1985 5.0X20cm strips, Min. {N(kgf)} Warp Weft 650(66) 600(61) 6 Dimensional change (Shrinkage or Elongation), Percent (Max) Warp Weft 7 Sourcing loss, percent (Max) 1.5 1.5 2.0 IS 1983 : 1977 -- IS:2977 : 1964 8 pH value 6.0 to 8.0 IS 1390 : 1983 9 Resistance to Pilling(Min) 4 IS 10971:1984 10 Colour fastness to: (a) Light 5 (b) Washing 4 (c) Perspiration 4 (ii) TOWEL ORDINARY WHITE (112 X 61 CMS) 1 IS 171 : 1985 Approximate Count of Table-1,Table-2, Yarn Cotton Count(Tex) Table 3 & Table 4) Warp 20s/2(30 tex X2 ) IS:686-1985 IS:2454 :1985 IS:971 : 1983 Weft 12s (50 tex) 2 ENDS/cm 220 IS : 1963 :1981 3 PICKS/cm 190 IS : 1963 :1981 4 MASS/g/sqrm 500 IS:1964 :1970 5 Breaking Load on 5.0X20cm strips, Min. {N(kgf)} Warp Weft 9 Colour fastness to: (a) Light (b) Washing (c) Rubbing (d) Bleaching 10 Scouring loss, percent, (Finished) 480 5 or better 4 or better 4 or better 4 or better -- -- IS:686-1985 IS:765-1979 IS:766-1988 IS 762:1988 2.5 IS:1390-1961 11 Wettability, Max 10 seconds IS 2349 :1963 12 Dimensional change, 4 IS 2977 :1989 percent , Max Note :- Lab test report is to accompanied with swatch duly stamped, if not received the offer will be treated as incomplete document and rejected.
- Page 1 and 2: Tele : + 91 - 11 - 23386873 REGISTE
- Page 3 and 4: Bank authorized to conduct governme
- Page 5: (v) Certificate of acceptance of te
- Page 8 and 9: will be liable to refund that amoun
- Page 10 and 11: orders to them by the Excise Author
- Page 12 and 13: Part IV - Special Conditions of RFP
- Page 14 and 15: 12. Force Majeure clause: a) Neithe
- Page 16: (c) The quality claims for defects
- Page 19 and 20: 1 NOS 5495 2500 1300 1,925.00 955 6
- Page 24 and 25: (iii) BLANKET NAVY BLUE Sl. No. Spe
- Page 26 and 27: Sl. No. (a) JERSEY BLACK WOOLEN Spe
- Page 28 and 29: SCARF NECKWEAR: WOOLEN Sl. No. Spec
- Page 30 and 31: label. (m) ---do--- 5.13 GENERAL ST
- Page 32 and 33: Sl. No. Specification reference U P
- Page 34: SCARF NECKWEAR WOOLEN Sl. No. Speci
TECHNICAL BID-COMPLIANCE STATEMENT<br />
APPENDIX ‘A’<br />
(Refer Para 3 of Part II of RFP)<br />
Sl.<br />
No.<br />
(i)<br />
Specification reference<br />
(a) IS: 175:1989<br />
(Variety No. V)<br />
Relevant<br />
Para No.<br />
Item Details<br />
SHEET BARRACK(BED SHEET) WHITE 240X135CMS<br />
(b) --do-- 4.2<br />
(ii)<br />
4.1/3.1 Fabric : Bedsheet shall be made from 48<br />
percent polyester and 52 percent cotton<br />
blend. Fibre blend shall be intimately mixed.<br />
Sewing Thread : Cotton sewing thread of<br />
60s/3 cotton count (100 dtex X3) conforming<br />
IS 1720:1978 shall be used. In case of dyed<br />
4.3 sheets, the thread shall be of a similar<br />
shade.<br />
Hems : Each transverse end of sheet shall<br />
have a 2 cms hem. Minimum of o.5 cm of<br />
the raw edge shall be returned in.<br />
Side Edges : The sheets shall have<br />
selvedge on the two sides.<br />
Sewing : The sewing shall be of even<br />
tension and the loose ends shall be finished<br />
securely and neatly. The number of stitches<br />
shall not be less than 4 per cm.<br />
Dimension : The finished dimensions of<br />
bedsheet shall be 240 X 135 cms. Subject<br />
to a tolerance of (+/-) 1 cm and (+/-) 2 cm on<br />
width and length respectively.<br />
TOWEL ORDINARY WHITE (112 X 61 CMS)<br />
(c) IS 171 : 1985 4.1 Yarn : The cotton yarn used in the manufacture<br />
of towel shall conformate the requirement<br />
specified in IS 171 : 1985.<br />
Compliance<br />
to<br />
specification<br />
– whether<br />
Yes /No<br />
In case of<br />
noncompliance,<br />
deviation from<br />
specification<br />
to be specified in<br />
unambiguous<br />
terms<br />
(d) ---do--- 4.2,<br />
4.2.2<br />
Towel : (i) The towels shall be free from<br />
dressing and filling materials and substances<br />
liable to cause subsequent tendering.<br />
(ii) Each transverse end of the towel shall be<br />
either finished with a fringe 4 to 5 cm in length,<br />
or hemmed to a depth of not less than 15 mm,<br />
the raw edges having a turn-in of 10 mm before<br />
the hem is formed. The cotton sewing thread of<br />
100 d tex X 6 (60/6) shall be used in hemming<br />
and the number of stitches shall not be less than<br />
4 per centimeter.<br />
(iii) The towels when visually examined shall be<br />
reasonably free from spinning, weaving and<br />
processing defects.
Change language