Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2. Know Your Robomow ®<br />
2.1 What’s in the Box<br />
1<br />
9<br />
Models with a Base Station<br />
10<br />
2<br />
3<br />
11<br />
12<br />
13<br />
4<br />
Operating & Safety Manual<br />
5<br />
DVD<br />
6<br />
14<br />
7<br />
8<br />
Models without<br />
a Base Station<br />
1 Robomow® 8<br />
2<br />
3<br />
Wire Pegs<br />
Used for securing the wire to the ground.<br />
Perimeter Wire<br />
Used to create a virtual wall for your Robomow<br />
4 Operating & Safety Manual 11<br />
5<br />
6<br />
7<br />
DVD<br />
Setup and Operation Video.<br />
RoboRuler<br />
Used for setting the distance of the Perimeter Wire from the<br />
lawn edge.<br />
Wire Connectors<br />
Used for splicing wires (as needed)<br />
9<br />
10<br />
12<br />
13<br />
14<br />
Plot Connectors<br />
Used for connecting the Perimeter Wire to the Base Station<br />
Base Station<br />
Used by Robomow to dock and charge when it is not<br />
mowing.<br />
Base Station Stakes<br />
Used for securing the Base Station to the ground<br />
Extension Cable<br />
15 meters (50 ft.), (Low voltage cable)<br />
Power Box<br />
Used to deactivate (halt) the automatic operation mode<br />
and reactivate it as needed. Also provides indication<br />
of Robomow’s status (Docking or Operating) and the<br />
Perimeter Wire’s health.<br />
Power Box Mount<br />
Used for fixing the Power Box to a wall (including Screws and<br />
dowels).<br />
Perimeter Switch (incl. Power Supply and Stake)<br />
Used to generate the signal in a Non-Base zone. The<br />
Perimeter Switch comes with models which are not supplied<br />
a Base Station and is available as an accessory.<br />
7