You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
OK to choose /<br />
approve selection<br />
Mowing with Edge /<br />
Left arrow<br />
ok<br />
Mowing without Edge /<br />
Right arrow<br />
Settings<br />
STOP<br />
GO to<br />
Base (Home)<br />
Stop (during operation) /<br />
Back while in the menu<br />
6.3 Manual Operation<br />
Manual Operation is used when mowing the lawn at unscheduled times.<br />
To initiate Manual Operation when Robomow is at the Base Station, press one of the buttons (except the STOP<br />
button) to show the display.<br />
If the battery is fully charged and the mowing schedule is set to ‘On’, then the start time of the next operation is<br />
displayed, otherwise the current day and time are displayed.<br />
Once the display is shown, choose the operation mode you want as provided in the table below:<br />
Operation Mode Child Lock is Off Child Lock is On<br />
Mowing with Edge –<br />
Mowing the edge before starting<br />
to mow the inner area.<br />
It is recommended to use this<br />
mode once or twice a week,<br />
depending on how fast the grass<br />
is growing.<br />
Mowing without Edge –<br />
Mowing only the inner area<br />
without the edge.<br />
It is recommended to use this<br />
mode only in the first operation of<br />
each Mowing Cycle.<br />
Press the ‘Edge before mowing’<br />
(left arrow) button once<br />
Press the ‘Mowing’ (right arrow)<br />
button once<br />
Press the ‘Edge before mowing’<br />
(left arrow) button then press OK<br />
Press the ‘Mowing’ (right arrow)<br />
button then press OK<br />
Note – if a Sub-Zone is defined, then once you choose the Operation Mode, then L1 (Main Zone) will be<br />
displayed. Use the arrow buttons to scroll and choose the required zone to be mowed and press OK.<br />
31
Change language