CHAPTER 11 - Hafele

CHAPTER 11 

Shopfitting Systems, 

Wall and Floor Systems 

FF 11.1


Shopfitting Systems, Wall and Floor Systems 

Table of Contents 

Information 

Information on 

Shopfitting 

Bar railing systems 

Room systems and curtain wall systems 

Organisation systems 

Shoptec 

11.4 





A Cover profile 

B Panel fixing profile, top 

C Hook-in profile, top 

D Panel fixing profile, centre 

E Wall bracket 

F Groove profile 

G Base profile 

Panel mounting system 

consists of different profiles and 

ook-in parts allows the use in different 

ple, in the kitchen, bathroom, office, 

fitting, etc. 

B D F 

Hook-in profile, horizontal/vertical 

A trendy design system Hook-in for all living profile, areasEliox 

Wall profiles 




Raised floor bearing systems 

Dimensional data not binding. We reserve the right to alter specifications without notice. 

Diflex adjusting foot, for raised floors 

Prices • Availability • Ordering • www.hafele.com 

Call +632 571 3683 - Manila • +6332 345 3672 - Cebu 


Dimensions in mm 

Inches are approximate 

FF 11.3 

11


Shopfitting 

Getting the best from your shop 

The main emphasis when a shop is being equipped is on the customer’s shopping 

experience. It is important for the customer to feel good, and that the products are 

displayed in accordance with the target group in a way that is particularly eye-catching. 

It is extremely important for the products to be displayed in a way that encourages sales 

and doesn’t cost the earth! 

As well as complete fitting systems you will also find wall-mounted systems, storage systems 

and many other high-quality shopfitting products. You will find suitable locking systems 

(mechanical (Symo) and electronic (Dialock)) in Chapter 4. This allows users who are not 

shopfitting specialists to also offer professional, design-oriented solutions without problems 

and therefore open up a new business area. 

Sufficient individual design options are available, without complicated planning. The various 

Häfele shopfitting systems can be universally deployed and flexibly adapted to suit any 

industry, shop size or budget. 

11 




For optimum results 

• You can still provide a professional shopfitting service, even though it may not be 

your specialist area. 

• Freely combinable system components make made-to-measure shop design possible 

• All of the shopfitting systems are flexible for subsequent changes 

• Installation is simple and problem-free 

• Components can be dismantled for easy storage and transportation 

• All systems available from stock at short notice at any time 

• All systems meet our high quality standards 



Dimensional data not binding. We reserve the right to alter specifications without notice.


Shopfitting 

ShopTec – A shopfitting system for any situation 


Product displays, shelves and rails must flexibly adapt to different requirements and 

present the product range in an optimum way in the sales room – regardless of whether it 

is wall-mounted or in the middle of the room. ShopTec is a universally deployable, neutral 

shopfitting system that meets the majority of requirements – regardless of the industry or 

the product range. All system components are extremely easy to install, can be combined 

in any way you like and therefore provide a wide range of shopfitting variants. 

Columns Column foot Brackets and accessories 






11


Shopfitting 

Single – Clear design appeal for demanding customers 

The Single shopfitting system makes it possible to present many different product ranges in 

an individual way. All elements can be used individually or combined. The different display 

rails and shelves are inserted into the base plate without using tools and can be replaced 

at any time. Any supporting structure can be used. 





Display 150 – A classic with a wide range of materials 

The Display System 150 system provides countless combination options due to its different 

finishes and extensive range of display rails. The 150 mm groove intervals and continuous 

profiles make it possible to display products of any kind in the best possible way – regardless 

of whether they are big or small. The display rails and shelves are also available in 

different materials, and are attached without the need for tools. 





Bar railing systems 

Bar railing systems from Häfele 

The bar railing system from Häfele represents another individual solution for the project 

and hotel area that can also be used in the private sector. The railings are available in three 

different diameters and can be individually bent in accordance with requirements. The 

comprehensive range of accessories such as railing supports, end caps, glass holders and 

glass sreen supports makes it possible to create individual designs and blend in with the 

respective situation in an immaculate, dimensionally accurate way. All of the connections 

can be either screw-fixed or glue-fixed. 


Brass and stainless steel 

The bar railing system is available 

with three different finishes and can 

therefore be adapted to any style of 

furnishing. 



Glass holders 

Glass holder are a decorative eyecatcher 

and provide good organisation 

and ease of access. 

Glass screen supports 

Different shapes and attachment methods 

allow them to be adapted to the respective 

project. 




11


Room systems and curtain wall systems 

For a new spacious feeling 

Curtain wall and room systems provide solutions for any application area and therefore 

provide you with integrated systems. Particular attention has been paid to ease and speed 

of installation and maximum flexibility. 


Keku 

The Keku R room system provides a 

facility for panelling walls and ceilings 

or designing entire rooms. A 32 mm 

interval is used. Keku fittings make it 

possible to suspend and take down 

elements without using tools. 




Diflex 

The Diflex raised floor system can 

be individually adjusted using a 

threaded bar. The swivelling foot 

plate also compensates for uneven 

surfaces and reduces noise due to 

the hard foam pads. 


The panel mounting system consists 

of just two basic elements and is 

characterised by its simple, rational 

installation. 





Organisation systems 

Organisation with Häfele 

Häfele storage systems make it possible to store and organise many different products in a 

space-saving way - regardless of whether it is in a pharmacy, a shop or in the warehouse. 

All systems can be flexibly adapted. Optimum use can be made of available space, and the 

space can be organised in accordance with the customer’s specific requirements. 


Pharmacy 

Different drawer depths make optimum 

use of space and provide a uniform 

appearance – even with tricky layouts. 

The comprehensive range of 

accessories provides optimum storage 

and organisation for all items. 



Shop 

The HV drawer and its small panel 

height can be used in any situation 

where large quantities of products have 

to be organised in a limited amount of 

space. The system is rounded off by the 

high-quality runners with self-closing 

and soft-closing, and the 

comprehensive range of accessories. 

Warehouse 

The systems can always be adapted 

to the respective situation because of 

the different combination options and 

the comprehensive range of 

accessories. Clear labelling systems 

also make a contribution to perfect 

warehouse organisation. 




11

Shopfitting Systems 

Shoptec 

Shoptec is a highly flexible and universal shopfitting system. 

Various basic elements can be combined with each other, allowing 

the best possible use to be made of the available space. The 

garment display rails are easy to install in columns and wall 

channels and no tools are required. 

Shoptec provides you with a wide range of garment display rails 

and therefore individual ways of successfully displaying 

merchandise. 

Pitch length, length over engagement hooks and effective length 

Standard pitch length, length over engagement hooks and effective 

length guarantee compatibility between wall channels, columns and 

available components such as shelf supports or support rails. 

Dimensions for column 30 x 30 mm 

A Internal width 595/970 

B Pitch length 625/1000 

C Length over engagement hooks 621/996 





Safety requirements 

Shelf systems must comply with the technical safety requirements 

defined in EN 1727:1998. Among other things, this means that 

shelf systems must be secured to prevent tipping. 

The surface must be suitable or appropriately reinforced for erecting 

a shelf system. 

Other applicable storage equipment and device guidelines must 

also be complied with. 

Dimensions for column 60 x 30 mm 

A Internal width/effective length 595/970 



Dimensions for round column, Ø 60 mm 

A Internal width/effective length 565/940 







Shoptec 

Wall channel 

• Material: 

• Finish: 

• Interval: 

Steel 

Plastic coated 

50 mm 

→ U-Channel 

→ Accessories 

Fixing material 

Supplied with 

20 Wall plugs (Ø 6 x 36 mm) 

20 Chipboard screws (Ø 4.5 x 60 mm) 

20 Self adhesive caps of each colour 

(brown, white, black and white aluminium) 

Cat. No. 

Fixing material 772.03.993 

Hole pattern: Single slotted Hole pattern: Double slotted Packing: 1 or 10 packs 


Length L 

mm 

Packing: 1 pair 

White, 

RAL 9003 

White 

aluminium, 

RAL 9006 

Hole pattern: Single slotted 

1000 772.03.108 770.03.210 

1500 772.03.153 770.03.215 

2000 772.03.206 770.03.220 

2500 772.03.251 770.03.225 

Hole pattern: Double slotted 

1000 772.05.102 770.05.210 

1500 772.05.157 770.05.215 

2000 772.05.200 770.05.220 

2500 772.05.255 770.05.225 





FF 11.11 

11


Shoptec 

Bracket 

• Area of application: 

• Material: 

• Finish: 

• Installation: 

For supporting shelves, for single or double slotted wall channels and columns 

Steel 

Plastic coated 

For hooking into slots in wall channel or column 

Note 

The specified load bearing capacity only applies with evenly distributed load per bracket. 

Note 

Glass shelves can be used in combination with shelf supports and suction pads. 

Load bearing capacity 55 kg, with 2 hooks 

Thickness 

mm 

Depth T 

mm 

White, 

RAL 9003 

White 

aluminium, 

RAL 9006 


2.0 200 772.60.211 770.60.221 

2.5 250 772.60.266 770.60.226 

2.5 300 772.60.319 770.60.231 

2.5 350 772.60.364 770.60.236 

2.5 400 772.60.417 770.60.241 


2.5 500 772.64.513 770.64.251 

2.5 600 772.64.601 770.64.260 

Packing: 1 or 20 pieces 






→ Shelf supports 

Single-sided 

Double-sided 


• Material: 

• Apertures: 


For fixing shelves to brackets 

Stainless steel 

Ø 5 mm 

For clipping onto brackets, 

with drill hole for screw fixing to wooden shelves or for 

inserting suction pads 

Note 

The shelf supports can be used for glass shelves in combination with suction pads. 

Version 

Cat. No. 

Single-sided 772.20.056 

Double-sided 772.20.065 

Packing: 1 pack (12 pieces) 





Shoptec 

→ With angled screw fixing surface 

→ For inlaid shelves 


• Material: 

• Load bearing capacity: 

• Version: 

For supporting wooden and glass 

shelves 

Steel 

55 kg 

With 2 hooks 

For wooden shelves 

Load capacity 55 kg, with 2 hooks 

Load capacity 65 kg, with 3 hooks 

For glass shelves 


For screw fixing to shelves 

Note 

Can also be used for glass shelves in combination with suction pads. 


Thickness 

mm 

Depth T 

mm 

White, 

RAL 9003 

White 

aluminium, 

RAL 9006 


2 180 772.68.207 770.68.220 

2 230 772.68.252 770.68.225 

2 280 772.68.305 770.68.230 

2.5 330 772.68.350 770.68.235 

2.5 380 772.68.403 770.68.240 


2.5 480 772.69.508 770.69.250 

Packing: 1 or 10 pairs 




For wooden shelves 22 mm thick 

Finish/colour 

Cat. No. 

Chrome plated 772.79.212 

Plastic coated, white aluminium, similar to RAL 9006 770.79.212 



For glass shelves 8 – 10 mm thick 

Finish/colour 

Cat. No. 

Chrome plated 772.79.213 

Plastic coated, white aluminium, similar to RAL 9006 770.79.213 





11

Information 


InformationPanel mounting systemNew products and systemsNew products and systemsPlanning and Construction 

Area of application 

The panel mounting system covers walls. The basic construction is 

created by hook-in profiles. This system provides easy and efficient 

installation. 

Example 

For panel widths 0.7 – 1.0 m and panel height 3.0 m you need: 

• 3 Vertical hook-in profiles 3.0 m each 

• 3 Horizontal hook-in profiles 1.0 m each 

• 1 Gap profile 3.0 m (if required) 

Installation 





1 

Mount top horizontal hook-in profile at a distance of min. 120 mm 

to lower edge of ceiling. Hook vertical profiles in the mounted top 

horizontal profile and mark mounting heights of further horizontal 

hook-in profiles. 

2 

Mount vertical hook-in profiles to panel (upper edge flush) and 

shorten at panel bottom as required. 




Wall Systems 


Hook-in profiles 

Horizontal 

Vertical 

• Material: 

• Finish: 


Steel 

Galvanized 

For screw fixing to the wall 

Note 

Use at head screws around the area by the hook of the vertical 

hook-in prole, in order to ensure sufficient stability. 


Cat. No. 

Hook-in prole, horizontal 783.50.950 

Packing: 5 m 




Cat. No. 

Hook-in prole, vertical 783.51.930 

Packing: 3 m 

For screw fixing to panel and hooking into 

horizontal hook-in prole 




11

Wall Systems 


Hook-in profile – Eilox 

For easy construction of wall claddings 

• Exact positioning by means of hook-in lips 

• Same rail for wall and cladding component 

• With ridge on the underside, e.g. for cable routing 

Building material class A1 according to DIN 4102 part 4/03.81 

"Fire behaviour of building materials and elements" 


• Material: 

• Version: 


For wall claddings, paintings, etc. 

Aluminium 

Screw holes at 96 mm intervals, 

for Hospa 5.0 or Varianta 6.0 

For screw fixing 

Note 

max. 1,000 mm height distance between 2 hook-in profiles. 

Length 

Cat. No. 

mm 

2000 783.53.002 

Packing: 2 m 

Order reference 

Rails without holes for glue fixing available on request. 








Wall Systems 


Wall profiles 


The wall organisation system consists of different profiles and 

hook-in parts. The variety of hook-in parts allows the use in different 

areas of application. For example, in the kitchen, bathroom, office, 

wardrobe, workshop, in shopfitting, etc. 


B Panel fixing profile, top 

C Hook-in profile, top 

D Panel fixing profile, centre 


F Groove profile 

G Base profile 

B D F 

A trendy design system for all living areas 







Wall Systems 



Area of application 

For covering the side edge and 

top edge of panel wall 

Length Installation 

Cat. No. 

mm 

2000 For screw fixing 814.20.951 

B Panel fixing 

profile, top 

For upper panel fixing 2000 For inserting into the central groove 

in panel 

For screw fixing to the wall 

814.20.941 

C Hook-in profile, 

top 

For inserting into the top fixing 

profile 


D Panel fixing 

profile, centre 

Connection between two panels 

for receiving the hook-in parts 

2000 for sliding into the wall bracket 814.20.921 


For holding the centre panel 

fixing profile 


F Groove profile For receiving the hook-in parts 2000 For push fitting into groove in panel 814.20.911 

G Base profile For lower panel fixing 2000 For inserting into the central groove 

in panel 

for screw fixing to the wall 

814.20.901 

Packing: 1 piece 







Call +632 571 3683 - Manila • +6332 345 3672 - Cebu

Floor Systems 

Raised floor bearing systems 

Diflex Adjusting foot 

For raised floors 

• Area of application: For medium load bearing areas, renovating old buildings or offices and for routing wires, cables and pipes of any 

kind beneath a floor 

• Material: Adjusting screw: Steel, support and foot plate: Plastic 

• Finish/colour: Adjusting screw: Galvanized, support and foot plate: Grey 

• Version: 

M8 adjusting screw with SW 4 hexagon socket, foot pl ate with hard foam pads, soundproofing value Lw26 db 

• Installation: Adjusting screw with support for knocking into squared edge timber (levelling batten), foot plate for plug fitting onto 

adjusting screw 

Advantages 

• Efficient assembly 

• Drilling only needed to countersink screw with pre-mounted support 

• No dowels, screwing or preparing work required – just set in place 

• Quick alignment 

• Can be walked on immediately 

• Impact sound reduction due to hard foam pads 

Installation 


• Prepare squared edge timber/levelling batten 

For distance from lower oor 70 – 120 mm 



• Knock in screw with pre-mounted support 

from beneath 

• Turn squared edge timber/levelling batten 

and align at a distance of 500 mm 

• Level out height of squared edge timber/ 

levelling batten using adjusting foot 

• Lay and x the floor covering 

Distance mm Breaking load N Cat. No. 

From lower floor: 70 – 120 max. 3,800 791.10.017 

From lower floor: 120 – 190 max. 6,000 791.10.026 

Packing: 1 or 50 pieces 

For distance from lower floor 120 – 190 mm 




11

CHAPTER 11 - Hafele

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?