Packaged Cooling with Electric Heat Rooftop Units Voyager ... - Trane

Performance
Data
(12½ Ton)
High Efficiency
Table PD-22 — Evaporator Fan Performance — 12½Ton — TCD151C — Standard or TXV Refrigeration System
External Static Pressure (Inches of Water)
.10 .20 .30 .40 .50 .60 .70 .80 .90 1.00
CFM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
3 HP Standard Motor & Field 3 HP Standard Motor & Field 3 HP Standard Motor & Drive
Supplied Low Static Drive (2) Supplied High Static Drive (2)
2500* — — 402 0.30 460 0.39 510 0.48 555 0.56 595 0.64 633 0.74 667 0.83 699 0.92 731 1.02
3250* 378 0.35 447 0.49 503 0.62 552 0.74 595 0.86 634 0.97 672 1.08 706 1.19 739 1.30 769 1.40
4000 430 0.56 495 0.74 549 0.91 596 1.07 638 1.22 677 1.37 712 1.52 747 1.66 778 1.80 809 1.94
4500 466 0.74 528 0.95 580 1.14 627 1.33 668 1.51 706 1.68 742 1.85 776 2.02 806 2.18 836 2.34
5000 503 0.96 562 1.20 612 1.42 657 1.63 699 1.84 736 2.04 771 2.23 803 2.41 835 2.61 865 2.80
5500 540 1.22 597 1.49 645 1.74 689 1.98 729 2.20 767 2.44 801 2.66 833 2.87 864 3.07 893 3.28
6000 579 1.53 633 1.82 680 2.10 722 2.37 761 2.63 797 2.87 832 3.13 864 3.38 894 3.61 922 3.83
3 HP Standard Motor & High Static Drive Accessory 5 HP Oversize Motor & Drive
Table PD-22 — Evaporator Fan Performance — 12½ Ton — TCD151C — Continued
External Static Pressure (Inches of Water)
1.10 1.20 1.30 1.40 1.50 1.60 1.70 1.80 1.90 2.00
CFM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
3 HP Standard Motor & Drive 3 HP Standard Motor & High Static Drive Accessory
2500* 760 1.11 789 1.21 817 1.31 842 1.41 868 1.51 892 1.60 916 1.71 939 1.81 962 1.91 984 2.01
3250* 798 1.52 827 1.64 853 1.76 880 1.88 905 2.01 928 2.13 953 2.26 976 2.38 998 2.51 1020 2.63
4000* 839 2.07 867 2.21 893 2.33 919 2.47 943 2.59 967 2.73 991 2.88 1013 3.03 1036 3.18 1056.4 3.33
4500 865 2.50 892 2.66 919 2.81 945 2.96 970 3.11 994 3.25 1017 3.40 1039 3.55 1061 3.70 1082.3 3.85
5000 892 2.97 920 3.15 946 3.33 971 3.50 996 3.68 1020 3.85 1043 4.02 1066 4.18 1088 4.35 1109.6 4.50
5500 922 3.49 949 3.70 975 3.90 999 4.09 1023 4.28 1047 4.48 1070 4.68 1091 4.87 1114 5.06 1135.6 5.24
6000 950 4.05 977 4.29 1002 4.51 1028 4.74 1052 4.96 1074 5.16 1098 5.38 1120 5.59 — — — —
5 HP Oversized Motor & Drive
For Standard Evaporator Fan Speed (RPM), reference Table PD-31.
For Standard Motor & High Static Drive Accessory Fan Speed (RPM), reference Table PD-32.
For Oversized Evaporator Fan Speed (RPM), reference Table PD-33.
*Unit applications below 4000 CFM
• Electric heaters restricted on applications below 4000 CFM.
• Dehumidification (Hot Gas Reheat) or TXV with Frostat and Crankcase Heaters
are required on applications below 4000 CFM.
Fan motor heat (MBH) = 3.15 x Fan BHP
Data includes pressure drop due to wet coils and filters.
No accessories or options are included in pressure drop data.
Refer to Table PD-35 to determine add’l static pressure drop due to other options/accessories.
Note:
1. Field Supplied Fan Sheave BK115 Required. Field Supplied Belt may be necessary.
Factory supplied motors, in commercial equipment, are
definite purpose motors, specifically designed and tested to
operate reliably and continuously at all cataloged conditions.
Using the full horsepower range of our fan motors as shown
in our tabular data will not result in nuisance tripping or
premature motor failure. Our product’s warranty will not be
affected.
36 RT-PRC002-EN