Applications Guide Tracer Graphical Programming - Trane

®
Writing the sump heater module
Figure 68: Creating Wireless connection block
3. Under Block, click the Write (Create) option to create a Wireless connection
block.
4. Under Create, click the Analog option to create an analog connection.
5. In the Name field, type:
SumpTemp
The name may be up to 16 characters in length. Spaces are not
allowed.
6. Click OK. The Wireless write block appears in the design space.
7. Connect the Wireless write block with a wired connection to the Sump
Temp input block (Figure 69).
Figure 69: Wireless write connection
8. From the Blocks menu, choose Wireless. and click in the design space
to place a Wireless block. The Wireless Connection Properties dialog
box appears (Figure 70 on page 68).
CNT-APG001-EN 67