Applications Guide Tracer Graphical Programming - Trane
Applications Guide Tracer Graphical Programming - Trane Applications Guide Tracer Graphical Programming - Trane
® Chapter 2 Writing the exhaust fan program Figure 16: Constant block in design space Constant block 3. Double-click on the Constant block to open the Constant Properties dialog box (Figure 17). Figure 17: Constant Properties dialog box 4. Under Type, click the Analog option. 5. In the Value field, type: 85.0 6. To set the number of digits right of the decimal, in the Decimal Places field, type: 1 7. Click OK. The block value is changed to 85.0 (Figure 18). Figure 18: Constant block set to 85.0 20 CNT-APG001-EN
® Adding a comment Adding a comment Use comments to make notes in your program, to annotate blocks, or to describe logic. Place a comment under the 85.0 constant block indicating that it is being used as the equipment room temperature setpoint and that it is in degrees Fahrenheit. To add a comment: 1. From the Blocks menu, choose Comment and click in the design space to place the Comment block. The Comment dialog box appears. 2. Type: Equip Rm Temp Setpoint (°F) 3. Click OK. The comment appears in the design space (Figure 19). Figure 19: Comment added to describe the Constant block Comment block Arranging blocks As the saying goes, “A picture is worth a thousand words.” In graphical programming, because the picture tells a story, the way the picture looks becomes very important. Move blocks and use the alignment options to arrange your blocks and design your programs. Selecting and moving blocks Practice selecting and moving blocks in the design space. To select and move blocks: 1. Press and hold the left mouse button on a block and then move the cursor (click and drag) to move the block to a new position in the design space. 2. To select two or more blocks, press the Ctrl key while clicking to select blocks. The selected blocks are outlined in yellow. Note: You can also use a rubber-band selection to select more than one block. Click in the design space and drag the cursor so that the white line surrounds the blocks you want to select. 3. Click and drag the selected blocks to a new position in the design space. CNT-APG001-EN 21
- Page 1: Applications Guide Tracer Graphical
- Page 4 and 5: CNT-APG001-EN ®
- Page 6 and 7: ® Special notifications and format
- Page 8 and 9: ® Contents Arrangingblocks........
- Page 10 and 11: ® Contents Chapter 5 Cooling tower
- Page 12 and 13: ® Contents Chapter7 Constant-volum
- Page 14 and 15: ® Contents Summary-question answer
- Page 16 and 17: ® Figures Chapter3 Modifyingtheexh
- Page 18 and 19: ® Figures Figure 96: Input blocks
- Page 20 and 21: ® Figures Chapter 8 Constant-volum
- Page 22 and 23: ® Figures xx CNT-APG001-EN
- Page 24 and 25: ® Tables Chapter7 Constant-volumeA
- Page 26 and 27: ® Chapter 1 Using the Tracer Graph
- Page 28 and 29: ® Chapter 1 Using the Tracer Graph
- Page 30 and 31: ® Chapter 1 Using the Tracer Graph
- Page 32 and 33: ® Chapter 1 Using the Tracer Graph
- Page 34 and 35: ® Chapter 1 Using the Tracer Graph
- Page 36 and 37: ® Chapter 2 Writing the exhaust fa
- Page 38 and 39: ® Chapter 2 Writing the exhaust fa
- Page 40 and 41: ® Chapter 2 Writing the exhaust fa
- Page 42 and 43: ® Chapter 2 Writing the exhaust fa
- Page 46 and 47: ® Chapter 2 Writing the exhaust fa
- Page 48 and 49: ® Chapter 2 Writing the exhaust fa
- Page 50 and 51: ® Chapter 2 Writing the exhaust fa
- Page 52 and 53: ® Chapter 2 Writing the exhaust fa
- Page 54 and 55: ® Chapter 3 Modifying the exhaust
- Page 56 and 57: ® Chapter 3 Modifying the exhaust
- Page 58 and 59: ® Chapter 3 Modifying the exhaust
- Page 60 and 61: ® Chapter 3 Modifying the exhaust
- Page 62 and 63: ® Chapter 3 Modifying the exhaust
- Page 64 and 65: ® Chapter 3 Modifying the exhaust
- Page 66 and 67: ® Chapter 3 Modifying the exhaust
- Page 68 and 69: ® Chapter 3 Modifying the exhaust
- Page 70 and 71: ® Chapter 3 Modifying the exhaust
- Page 72 and 73: ® Chapter 4 Cooling tower with two
- Page 74 and 75: ® Chapter 4 Cooling tower with two
- Page 76 and 77: ® Chapter 4 Cooling tower with two
- Page 78 and 79: ® Chapter 4 Cooling tower with two
- Page 80 and 81: ® Chapter 4 Cooling tower with two
- Page 82 and 83: ® Chapter 4 Cooling tower with two
- Page 84 and 85: ® Chapter 4 Cooling tower with two
- Page 86 and 87: ® Chapter 4 Cooling tower with two
- Page 88 and 89: ® Chapter 4 Cooling tower with two
- Page 90 and 91: ® Chapter 4 Cooling tower with two
- Page 92 and 93: ® Chapter 4 Cooling tower with two
®<br />
Chapter 2 Writing the exhaust fan program<br />
Figure 16: Constant block in design space<br />
Constant<br />
block<br />
3. Double-click on the Constant block to open the Constant Properties<br />
dialog box (Figure 17).<br />
Figure 17: Constant Properties dialog box<br />
4. Under Type, click the Analog option.<br />
5. In the Value field, type:<br />
85.0<br />
6. To set the number of digits right of the decimal, in the Decimal Places<br />
field, type:<br />
1<br />
7. Click OK. The block value is changed to 85.0 (Figure 18).<br />
Figure 18: Constant block set to 85.0<br />
20 CNT-APG001-EN