Applications Guide Tracer Graphical Programming - Trane

Applications Guide Tracer Graphical Programming - Trane Applications Guide Tracer Graphical Programming - Trane

28.09.2014 Views

® Chapter 7 Constant-volume AHU example 188 CNT-APG001-EN

® Chapter 8 Constant-volume AHU with warm-up, pre-cool, and communications In this chapter, you will continue to hone your programming skills. You will modify the constant-volume air-handler programs you created in Chapter 7 to accommodate additional modes and communications with a Tracer Summit building automation system. Note: Many of the chapters in this book build on previous chapters, so be sure to complete the chapters in the order presented. See “About this book” on page 1 for additional instructions. What you will learn In this chapter, you will learn a variety of skills, concepts, and definitions. Concepts and definitions You will understand the following concepts and definitions: • How to use a LonMark profile for an air-handling application • How to write a program to accommodate communications with a building automation system (BAS) Block You will learn how to use the Network Variable Output block. CNT-APG001-EN 189

®<br />

Chapter 7 Constant-volume AHU example<br />

188 CNT-APG001-EN

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!