DRIVER'S MANUAL SB220GS - Training Registration System

Greases and oils
Automatic greasing system:
Lubricating grease:
Oil lubricated front wheel hubs:
Grease-lubricated front wheel hubs:
NLGI O EP grade
Lithium-base grease with
EP additive, NLGI class 2
SAE-80W90 or SAE-80W
according to API-GL4 or
GL5
Lithium-base grease with
EP additive,
NLGI class 2, or a better
grease, such as:
Castrol LMX,
BP ENERGREASE LC2,
ELF GRX 500,
MOBILGREASE HP2,
Q8 RUBENS,
SHELL RETINAX LX,
TEXACO HYTEX EP2,
or an equivalent
Specifications of diesel fuel
The minimum requirement for fuel is to EN 590. At extremely low
temperatures - AND IF PERMITTED BY LAW - a maximum of 20%
kerosine my be added. However, if this is PROHIBITED BY LAW, a
maximum of 20% lead-free petrol may be added.
If high speed fuel systems are used make sure to use fuel with
non-foaming diesel only.
Note
When using diesel fuel with a sulphur content HIGHER than 0,5%,
the oil change intervals should be adapted as follows:
Sulphur content Oil change interval
0.5% - 1,0 % 10.000 km
1.0% - 1.5% 5.000 km
Lubricity standard
Requirement: test method HFRR according to CEC-F-06-A96
standard
Test value ≤ 400 µm
NO ADDITIVE OF ANY KIND MAY BE MIXED WITH THE FUEL
OR LUBRICANTS EXCEPT IN THOSE CASES SPECIFIED BY
DAF BUS INTERNATIONAL.
80
TECHNICAL INFORMATION