DRIVER'S MANUAL SB220GS - Training Registration System

LUBRICANTS, COOLANT AND FUEL SPECIFICATIONS.
TO MEET GUARANTEE REQUIREMENTS AND TO INCREASE
DAF BUS INTERNATIONAL PRODUCTS’ LIFETIME, IT IS OF THE
UTMOST IMPORTANCE THAT THE CORRECT LUBRICANTS,
COOLANT AND FUEL ARE USED AND THAT REPLACEMENT
INTERVALS ARE BEING OBEYED.
Ask your fuel and lubricants supplier(s) if their products meet the
DAF BUS INTERNATIONAL specifications.
Warning:
Upon repair or reconditioning of engines involving the renewal
of piston rings and/or cylinder liners, the engine must be filled
with a “single grade (SAE 30)” ACEA-A1 (or CCMC-D4) oil.
Change this for the specified oil after 2,500 km.
Temperature limits
should be used as
guidelines only.
VISCOSITY
Avoid contact of skin with:
- fuel
- lubricants
- coolants
On skin contact, remove fluid immediately with water and soap.
OIL SPECIFICATIONS:
engine oil:
All engines
Oil quality
ACEA-E3 (or CCMC-D5)
**
When using SAE-10W oil, constant high number of revolutions
and heavy loads must be avoided if the temperature rises above
the indicated value.
Note:
If ACEA-E1 or E2 (or CCMC-D4) oil is used instead of the specified
ACEA E3 (or CCMC-D5) quality, the maximum period of time between
oil changes is 5000 km, regardless of the sulphur contents of
the fuel.
78
TECHNICAL INFORMATION