DRIVER'S MANUAL SB220GS - Training Registration System
DRIVER'S MANUAL SB220GS - Training Registration System
DRIVER'S MANUAL SB220GS - Training Registration System
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
01499B<br />
BLEEDING THE FUEL SYSTEM<br />
Diesel fuel is combustible<br />
and may not be exposed to<br />
open fire or heat sources<br />
such as a hot engine. Catch<br />
leaking fuel in a suitable can.<br />
1. Open the bleed screw (3) on the filter<br />
body.<br />
2. Pump fuel out of the bleed screw with<br />
the manual pump (4) until no more air<br />
bubbles are visible in the fuel.<br />
3. Close the bleed screw.<br />
RELEASING THE PARKING BRAKE<br />
a. With compressed air<br />
1. Place chocks behind and in front of the<br />
wheels.<br />
2. Move the parking brake lever forwards.<br />
3. The spring brake actuators can be<br />
released by connecting a tyre inflating<br />
hose to the tyre inflating connection.<br />
4. If necessary, air can be obtained from<br />
one of the tyres.<br />
5. Note the correct line pressure when<br />
doing this (max. 10 bar).<br />
b. Mechanically<br />
1. Place chocks behind and in front of the<br />
wheels.<br />
2. Use a ring spanner to turn the bolt counter-clockwise<br />
as far as the stop.<br />
3. Repeat this procedure for the other<br />
spring brake actuators.<br />
Important!<br />
Restore the parking brake to its normal<br />
operating condition as soon as possible by<br />
turning the bolts clockwise and tightening<br />
to a torque of 40-50 Nm.<br />
MAINTENANCE<br />
63
Change language