DRIVER'S MANUAL SB220GS - Training Registration System
DRIVER'S MANUAL SB220GS - Training Registration System
DRIVER'S MANUAL SB220GS - Training Registration System
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
V-BELTS<br />
Renewing V-Belts<br />
- Always fit the same type of V-belt.<br />
- If two V-belts are used, always renew<br />
the V-belts as a set.<br />
1. Slacken the central bolt (1) on the tensioning<br />
pulley.<br />
2. Slacken the fastening bolt on the spindle<br />
(2).<br />
3. Slacken the fastening bolts on the front<br />
and rear of the alternator (3).<br />
4. Slacken the lock nut (4) on the sleeved<br />
nut (5). Turn the sleeved nut so that the<br />
alternator is turned over to the engine<br />
bed.<br />
5. Remove the V-belt(s).<br />
6. Inspect the pulleys for damage, rust and<br />
grease deposits.<br />
7. Fit the new V-belt(s).<br />
8. Adjust the V-belt tension.<br />
Adjusting the V-belt tension<br />
1. Slacken the bolt (1) on the tensioning<br />
pulley.<br />
2. Slacken the fastening bolt on the stud<br />
(2).<br />
3. Slacken the fastening bolts on the front<br />
and rear of the alternator (3).<br />
4. Slacken the lock nut (4) on the sleeved<br />
nut (5).<br />
5. Move the alternator by turning the sleeved<br />
nut (5) until the correct V-belt tension<br />
has been reached.<br />
MAINTENANCE<br />
61