DRIVER'S MANUAL SB220GS - Training Registration System
DRIVER'S MANUAL SB220GS - Training Registration System
DRIVER'S MANUAL SB220GS - Training Registration System
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
A<br />
A<br />
DAF<br />
00736B<br />
B<br />
01487B<br />
ZF AUTOMATIC GEARBOX<br />
Checking the oil level:<br />
1. Make sure the vehicle is standing on level<br />
ground.<br />
2. Move the gear lever into neutral.<br />
3. Let the engine idle.<br />
4. Check the oil level with the dipstick. At<br />
operating temperature (± 85°C) the oil<br />
level should be between the marks (A).<br />
DIFFERENTIAL 1339 AXLE<br />
Note:<br />
Do not check the oil level immediately after<br />
a trip, but let the oil settle and cool down for<br />
about half an hour.<br />
Checking the oil level:<br />
1. Place the vehicle on level ground.<br />
2. Remove the spill plug (A). The oil level<br />
should be up to the edge of the filler/<br />
level hole (A). If necessary, top up.<br />
3. After checking, replace the spill plug.<br />
REAR WHEEL HUBS 1339 AXLE<br />
Checking the oil level:<br />
1. Place the vehicle on level ground.<br />
2. Position the wheels so that the arrow<br />
on the hub points upwards (vertically).<br />
3. Remove the filler/spill plug (A). At the<br />
hubs, the oil level should be up to the<br />
edge of the filler/level hole (A).<br />
4. After checking, replace the spill plug.<br />
60<br />
MAINTENANCE