DRIVER'S MANUAL SB220GS - Training Registration System
DRIVER'S MANUAL SB220GS - Training Registration System
DRIVER'S MANUAL SB220GS - Training Registration System
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
FRONT/<br />
REAR<br />
1<br />
1187168<br />
01486 B<br />
2<br />
01485B<br />
LF version<br />
1. Place a tray under the moisture<br />
separator.<br />
2. Unscrew the bleed nipple (1) on top of<br />
the moisture separator for the benefit of<br />
ventilation.<br />
3. Unscrew the serrated nut (2) a couple<br />
of turns.<br />
4. Allow as much liquid to flow out of the<br />
moisture separator until clean diesel<br />
comes out.<br />
5. Tighten the serrated nut (2) and the<br />
bleed nipple (1).<br />
CHECKING THE AIR DRIER OF THE<br />
BRAKE SYSTEM<br />
Operation of the air drier can be checked<br />
by inspecting whether the air reservoirs<br />
contain condensation.<br />
DRAINING THE AIR RESERVOIR<br />
1. Check all the air reservoirs for the<br />
presence of condensation and oil by<br />
pulling the draining valve’s ring.<br />
2. Feel the air flow using your hand. The<br />
air flow must feel dry and free from oil.<br />
3. If the air flow contains moisture or oil<br />
vapour, then the air dryer’s cartridge<br />
must be replaced.<br />
Oil vapour in the air flow could indicate<br />
that there is a fault with the air<br />
compressor.<br />
56<br />
MAINTENANCE
Change language