DRIVER'S MANUAL SB220GS - Training Registration System
DRIVER'S MANUAL SB220GS - Training Registration System
DRIVER'S MANUAL SB220GS - Training Registration System
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
The tachograph disc has a maximum<br />
registration time of one day (24 hours). It is<br />
therefore necessary to replace the tachograph<br />
disc (discs) with a new disc at least<br />
every 24 hours.<br />
The tachograph disc<br />
The front of the tachograph disc is green<br />
and the rear can either be red or blue.<br />
The red rear side is used for manual time<br />
group entries. The blue rear side is intended<br />
for vehicles with an (extra) engine speed<br />
(rpm) recording.<br />
The following information is automatically<br />
registered on the green front side of the<br />
tachograph disc:<br />
- Time scale (K).<br />
- Speed in km/h (J).<br />
- Time groups (L).<br />
Driving time (small bar).<br />
All other working times.<br />
All other periods of time whilst pre<br />
sent at the place of work.<br />
Breaks and rest periods.<br />
- Distance covered (M).<br />
Completion of the middle part of the front<br />
of the tachograph disc<br />
Before inserting the disc:<br />
19<br />
No.<br />
Name of driver/co-driver<br />
Place where working time commenced<br />
Date of commencement of working<br />
time (top line)<br />
<strong>Registration</strong> mark of vehicle<br />
Odometer reading at start of working<br />
time<br />
INSTRUMENTS AND CONTROLS<br />
25